Mada za sehemu hiiPerforming post-harvest treatmentsMada 3
- Conducting traditional treatments
- Conducting chemical treatments
- Performing packing of field crop produce
Post-harvest Treatment: Conducting Chemical Treatments
After harvesting, field crops like maize and beans are still alive and vulnerable to storage pests. Even well-cleaned and graded produce can be attacked by insects, leading to significant losses. Chemical treatment involves applying synthetic agrochemicals to harvested crops to control storage pests, reduce losses, and extend shelf life. This study note explains how to conduct chemical treatments safely and effectively.
Agrochemicals are commercially produced synthetic chemical compounds used in farming. In post-harvest treatment, they are applied to stored grains and seeds to manage insect pests.
Agrochemicals are categorized in three ways:
- By purpose: Fertilizers (enhance plant growth) and pesticides (manage pests)
- By production stage: Pre-harvest and post-harvest chemicals
- By application method: Dust, liquid, and gas (fumigant) formulations
Common Types of Post-harvest Chemicals
| Chemical Type | Function | Example |
|---|---|---|
| Insecticides | Kill insect pests | Actellic, Malathion |
| Fumigants | Kill pests through gas | Phosphine, CO₂ |
| Pheromones | Attract pests to traps | Sex pheromones |
| Antifeedants | Deter pests from feeding | Neem-based products |
Each chemical has active ingredients (the toxic substance that kills or repels pests) and inert ingredients (solvents, carriers that help deliver the active ingredient).
Pesticides enter pest bodies through three main routes:
- Contact – Chemicals pass through the insect's skin or eyes and are absorbed into the body
- Inhalation – Insects breathe in dust particles or chemical vapors
- Oral – Insects swallow pesticides mixed with their food
Understanding how pests are attacked helps in selecting the right chemical and application method.
1. Dusting
Dusting involves applying chemicals in powder form to crop produce. It is done during loading or bagging of grains.
Steps for dusting grains on an open floor:
- Prepare a clean flat surface (concrete floor or tarpaulin)
- Empty grain bags onto the floor in a heap
- Sprinkle the correct amount of insecticidal powder over the heap
- Shovel the heap to another part of the floor, then back again—repeat at least four times until no powder patches remain
- Collect treated grains into storage bags
Steps for dusting in storage cribs:
- Sprinkle a fine layer of insecticidal powder on inside walls and floor
- Cover the floor with a layer of crop produce
- Sprinkle more powder evenly over this layer
- Add more layers, sprinkling powder after each layer
- Cover the top layer with thin powder and close the structure
2. Spraying
Spraying is used for liquid pesticide formulations.
Steps for effective spraying:
- Weigh the produce to determine the exact amount of chemical needed
- Check and calibrate the sprayer for correct application
- Place grains on a clean canvas or floor
- Measure the recommended pesticide amount per the label instructions
- Mix the chemical with the recommended amount of water in the sprayer tank
- Spray the produce evenly—make it moist but not wet
- Use a spade to mix the sprayed produce thoroughly
- Pack the treated produce for storage
Calibration means adjusting the sprayer to deliver the correct amount of chemical at the right pattern. Proper calibration ensures uniform coverage and prevents under- or over-application.
3. Fumigation
Fumigation uses gases or vapors to kill pests in enclosed spaces. It requires airtight storage structures.
Before fumigation:
- Inspect the storage facility for cracks and repair them
- Check temperature, humidity, and gas concentration during the process
Fumigants like phosphine are highly effective but require careful handling and safety measures.
| Tool | Use | Suitable Scale |
|---|---|---|
| Knapsack sprayer | Liquid insecticides | Small–medium stores |
| Hand pump sprayer | Spot spraying | Small stores |
| Motorized mist blower | Fogging large rooms | Medium–large stores |
| ULV sprayer | Fine droplet spraying | Large warehouses |
| Dust applicator | Dust protectants | All scales |
| Fumigation systems | Fumigants (CO₂, phosphine) | Airtight structures |
Follow these six basic principles:
- Correct problem identification – Identify the pest correctly before applying chemicals
- Use right chemical for right purpose – Choose registered and approved chemicals; rotate chemicals with different modes of action to prevent pest resistance
- Timing – Apply chemicals at the right time when pests are vulnerable
- Proper application techniques – Use the correct method (dust, spray, or fumigation); calibrate equipment properly
- Safety to the user – Always wear PPE: gloves, masks, goggles, gum boots, and overalls
- Proper storage and disposal – Store chemicals in original labeled containers away from food; never reuse empty containers
Personal Protective Equipment (PPE) is mandatory when handling agrochemicals to prevent health problems.
Advantages
- Quick and effective in managing storage pests
- Provides longer protection than traditional methods
- Can be applied on a large scale
- Extends shelf life of harvested produce
Challenges
- Leaves residues that can harm humans and the environment
- More expensive than traditional treatments
- Requires careful handling and safety measures
- May lead to pest resistance if overused
A farmer has 50 kg of maize grain and wants to apply Actellic dust at the rate of 50 grams per 100 kg of grain.
Calculation:
For 50 kg of grain:
- Required chemical = (50 g ÷ 100 kg) × 50 kg = 25 g
The farmer should measure 25 grams of Actellic dust and mix thoroughly with the 50 kg of maize using the four-shovel method described above.
- Chemical treatment uses synthetic agrochemicals to control storage pests
- Three application methods: dusting, spraying, and fumigation
- Always follow safety principles and wear PPE
- Proper calibration of equipment ensures effective treatment
A small-scale maize farmer in Mwanza can apply chemical treatment after harvesting to protect stored grain from weevils and larger grain borers. For example, treating 200 kg of maize with 100 g of Actellic dust using proper dusting techniques can reduce post-harvest losses by up to 80%, helping the farmer preserve food for family consumption and sell surplus at the market for income.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select the tools, materials, equipment and safety gears
- Perform chemical treatment techniques
- Differentiate different agrochemicals used for treatment to different field crop produce
- Observe safety precautions
- Clean tools and equipment
- Store equipment and tools
Tathmini ya matokeo
Chemical treatments to field crop produce performed as per recommended standards
Tathmini ya maarifa
Knowledge Evidence
Detailed knowledge of:
Method used: The student should be able to explain how to carry out chemical treatment practices for field crop produce
Principles: The student should explain
- the principles for chemical treatment of field crop produce
- Different agrochemicals suitable for treatment to different field crop produce
Theories: The student should explain:
- Chemical treatments to field crop produce
- Requirements for using chemical treatment to field crop produce
Circumstantial knowledge:
Detailed knowledge about: Costs involved in performing chemical treatments and risks associated to it
Swali
Which one of the following is a category of agrochemicals based on the method of application?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado