Mada za sehemu hiiHandling fire accidents and incidentsMada 3
- Identifying fire-fighting materials and equipment
- Handling firefighting materials and equipment
- Operating firefighting equipment
Fire is a state of rapid combustion that produces light, heat, and flame. It occurs when three elements combine: fuel, oxygen, and heat. These three elements form what is called the fire triangle. If any one side of this triangle is removed, the fire stops burning. Understanding the fire triangle helps us know how to extinguish fires — we must remove at least one of these three elements.
In any workplace, including wood processing workshops, fire can cause serious injuries, death, and destroy equipment, materials, and buildings. This is why proper firefighting materials and equipment must be available and workers must know how to use them.
A fire extinguisher is a device used to put out small fires by cutting off oxygen or reducing heat. Different types of extinguishers are designed for different classes of fire. Using the wrong type can be dangerous or ineffective.
1. Water Extinguisher
- Used for: Class A fires (ordinary combustibles like wood, paper, cloth, plastics)
- How it works: Water cools the fire and reduces temperature
- Warning: Do NOT use on flammable liquids, electrical fires, or cooking oils — this can spread the fire or cause electrical shock
2. Foam Extinguisher
- Used for: Class A and Class B fires (flammable liquids like petrol, oil, grease, paint)
- How it works: Foam covers the fuel surface, blocking oxygen and preventing re-ignition
- Common in: Workshops and areas where flammable liquids are used
3. Chemical Extinguisher (Dry Powder)
- Used for: Class A, B, and C fires (depending on powder type)
- How it works: Powder interrupts the chemical reaction of fire and creates a barrier between fuel and oxygen
- Commonly found in: Homes, offices, and vehicles
4. Carbon Dioxide (CO₂) Extinguisher
- Used for: Class B and Class C fires (flammable liquids and electrical equipment)
- How it works: CO₂ gas displaces oxygen, suffocating the fire
- Advantage: Leaves no residue, safe for sensitive electrical equipment
5. Dry Chemical Extinguisher
- Used for: Class A, B, and C fires
- How it works: Similar to chemical extinguishers — interrupts fire chemistry and blocks oxygen
- Common in: Commercial buildings and factories
6. Vaporizing Liquid Extinguisher (Wet Chemical)
- Used for: Class K fires (cooking oils, fats, and greases)
- How it works: Liquid reacts with hot oil to form a soapy foam that smothers the fire
- Common in: Kitchens and food preparation areas
The easiest way to remember how to use a fire extinguisher is the acronym PASS:
- Pull the pin located on the handle
- Aim the nozzle at the base of the fire (not the flames)
- Squeeze the handle to release the extinguishing agent
- Sweep the nozzle from side to side at the base of the fire until extinguished
Important Tips When Using an Extinguisher
- Stand at a safe distance, then move forward as the fire gets smaller
- Keep aiming at the base of the fire throughout
- After the fire appears out, watch carefully — it may re-ignite
- If the fire is too large or spreading, evacuate immediately and call the fire department
- Fire extinguishers are for small fires only — do not take unnecessary risks
Fire extinguishers must be regularly inspected and maintained by a competent person to ensure they work when needed. Poor maintenance can mean the extinguisher fails during an emergency.
Regular Checks Include:
- Ensuring the extinguisher is in its designated place and accessible
- Checking that the pressure gauge is in the green zone
- Verifying the safety pin is in place and the seal is unbroken
- Checking for visible damage, rust, or corrosion
- Ensuring the operating instructions are readable
Maintenance Requirements:
- Servicing should be done by a certified technician at least once a year
- Monthly visual inspections are recommended
- Extinguishers should be tagged with inspection dates
- Any damaged or expired extinguishers must be replaced immediately
In Tanzania, wood processing workshops and carpentry shops in places like Mwanza, Arusha, or Dar es Salaam must have fire extinguishers installed. A carpenter working at a small workshop near Buguruni should know which extinguisher to use if sparks from a saw ignite sawdust — a water extinguisher would be appropriate for Class A fires involving wood materials. Regular inspection ensures the extinguisher works if a fire starts, protecting the worker's tools, materials, and livelihood.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
- Identify tools, equipment, and materials for handling firefighting
- Adhere to safety in firefighting
- Clean and store firefighting materials and equipment
- Store tools and equipment
Tathmini ya matokeo
Firefighting materials and equipment handled as per standard regulations
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Methods used: The student should explain how to:
- Handle firefighting materials and equipment
- Apply safety principles while handling firefighting materials and equipment
Principles: The student should explain the principles of handling firehazardous materials
Theories: The student should explain:
- Effect of fire hazards
- Emergency life support
Detailed knowledge about: Safety precautions while handling accidents and incidents
Swali
What three elements combine to form the fire triangle?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado