Mada za sehemu hiiHandling fire accidents and incidentsMada 3
- Identifying fire-fighting materials and equipment
- Handling firefighting materials and equipment
- Operating firefighting equipment
Fire is a serious hazard in any workplace, including wood processing workshops. Knowing how to operate firefighting equipment correctly can prevent small fires from becoming disasters, protecting both people and property.
Fire is a chemical process that occurs when three elements come together:
- Fuel – any combustible material (wood, paper, oil)
- Heat – sufficient temperature to ignite the fuel
- Oxygen – air that supports combustion
These three elements form the fire triangle. If any one side of the triangle is removed, the fire stops. This is the principle behind all firefighting methods: we remove fuel, heat, or oxygen to extinguish the flame.
Different fires require different extinguishing agents. Using the wrong type can make the fire worse.
1. Water Extinguisher
- Use for: Class A fires (ordinary combustibles like wood, paper, cloth, plastics)
- How it works: Cools the fire and reduces temperature
- Warning: Never use on electrical fires or flammable liquids—water can spread the fire or cause electrical shock
2. Foam Extinguisher
- Use for: Class A and Class B fires (flammable liquids like petrol, oil, paint)
- How it works: Foam blankets the fuel surface, blocking oxygen and preventing re-ignition
3. Dry Chemical Extinguisher (Chemical Extinguisher)
- Use for: Class A, B, and C fires (various causes)
- How it works: Dry powder interrupts the chemical reaction of fire and creates a barrier between fuel and oxygen
4. Carbon Dioxide (CO₂) Extinguisher
- Use for: Class B and Class C fires (flammable liquids and electrical equipment)
- How it works: CO₂ gas displaces oxygen, suffocating the fire
- Advantage: Leaves no residue; safe for sensitive electrical equipment
5. Vaporizing Liquid (Wet Chemical) Extinguisher
- Use for: Class K fires (cooking oils, fats, greases)
- How it works: Liquid reacts with hot oil to form a soapy foam that smothers the fire
Fires are classified according to the fuel involved:
| Class | Fuel Source | Examples |
|---|---|---|
| A | Ordinary combustibles | Wood, paper, fabric, coal, rubber |
| B | Flammable liquids | Petrol, kerosene, oil, paint thinners |
| C | Flammable gases | LPG, butane, hydrogen, methane |
| D | Combustible metals | Sodium, potassium, magnesium |
| E | Electrical hazards | Computers, switchboards, power tools |
| F | Cooking oils/fats | Cooking oil, grease |
Follow these four steps:
- Pull the pin to break the tamper seal
- Aim the nozzle at the base of the fire (where the fuel is)
- Squeeze the handle to release the extinguishing agent
- Sweep from side to side at the base of the fire until extinguished
Important reminders:
- Start from a safe distance and move forward as the fire diminishes
- After the fire appears out, watch for re-ignition
- If the fire is too large or spreading, evacuate immediately and call the fire department
Fire extinguishers must be regularly checked to ensure they work when needed:
- Inspect monthly for visible damage, proper pressure, and tamper seal
- Have a competent person service extinguishers annually
- Ensure extinguishers are mounted in accessible locations near fire hazards
- Check that the gauge shows adequate pressure (the needle in the green zone)
Example: In a wood processing workshop, a fire starts in a pile of wood shavings near an electrical outlet. The worker should:
- Identify it as a Class A fire (ordinary combustible)
- Use a water or foam extinguisher
- Apply the PASS method
- After extinguishing, watch for re-ignition and report the incident
In Tanzania, wood processing workshops and carpentry shops are common in markets like Mwanza, Arusha, and Dodoma. If a fire starts due to sparks from machinery or improper storage of flammable oils, a trained worker can use the correct extinguisher to control the fire before it spreads to nearby buildings or materials, saving both equipment and preventing injury to co-workers.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
- Identify tools, equipment, and materials for operating firefighting
- Adhere to safety in operating firefighting equipment
- Clean and store firefighting materials and equipment
- Store tools and equipment
Tathmini ya matokeo
Firefighting equipment operated as per technical standards
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Methods used: The student should explain how to:
- Operate firefighting materials and equipment
- Apply safety principles while operating firefighting materials and equipment
Principles: The student should explain the principles of operating firefighting equipment
Theories: The student should explain:
- Classification of hazards
- Advantages of accident prevention
Detailed knowledge about: Safety precautions while operating firefighting equipment
Swali
What three elements combine to form the fire triangle?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado