Mada za sehemu hiiSorting logsMada 4
- Receiving logs at log yard
- Sorting logs according to diameter class and species
- Recording log dimensions in tally sheet
- Determining daily logs volume processed
Recording Log Dimensions in a Tally Sheet
When logs arrive at a sawmill, each log must be measured and recorded in a tally sheet. This creates an accurate inventory that helps the mill track how much wood is received, estimate its value, and plan for sawing. Recording log dimensions correctly is essential because errors in measurement lead to incorrect volume calculations, which affects pricing, production planning, and profit.
A tally sheet is a table with columns and rows used to record a log's diameter, length, and volume. It is an essential tool in inventory management for sawmills, forestry departments, and timber traders. The tally sheet helps maintain accurate records of logs, which supports stock tracking, value estimation, and planning for transportation or processing. It also reduces errors by providing a clear and systematic record of log dimensions and estimated volumes.
Information Recorded on a Tally Sheet
A complete tally sheet should contain the following information for each log:
- Log number (for identification)
- Tree species (such as Pine, Mahogany, Teak, Eucalyptus, or Grevillea)
- Length (in metres)
- Small-end diameter (in centimetres)
- Large-end diameter (in centimetres)
- Volume (in cubic metres)
- Defects or remarks (such as knots, cracks, rot, or rot)
Table 2.1 below shows a simple log tally sheet template.
Table 2.1: Log Tally Sheet Template
Form No.: ............. Species: .............. Company Name: ............ Date: ............
| Log No. | Mid Diameter (cm) | Length (m) | Volume (m³) |
|---|---|---|---|
| 1 | |||
| 2 | |||
| 3 | |||
| 4 | |||
| Total |
Two main tools are used to measure the dimensions of logs:
-
Measuring tape: Made of metal or fibreglass, with graduation in centimetres or metres. It is used to measure the length of the log.
-
Callipers: Used for direct measurement of log diameter. A calliper consists of a graduated scale with two arms perpendicular to the scale. One arm is fixed, and the other slides along the scale. Callipers are commonly made of aluminium or wood.
Measuring Log Length
Length is measured using a metric measuring tape, in metres. Logs are normally cut to a pre-defined length. Logs whose usable lengths fall outside such a specification are not included in volume computation.
Measuring Log Diameter
The diameter should be measured using callipers or diameter tapes, in centimetres. When callipers are used, two measurements of diameter at right angles to each other should be taken. The diameter is recorded as the mean of the two measurements. To accurately measure the diameter:
- Ensure the calliper jaws are aligned with the log's surface
- Place the jaws on opposite sides of the log
- Take two measurements at right angles (perpendicular to each other)
- Average the two measurements for a more precise result
If a swelling occurs at the point of measurement, the diameter should be measured at points equidistant above and below the swelling, and the mean of the two measurements should be recorded as the actual diameter.
There are three key diameters that may be measured:
- Small-end diameter: The diameter at the thinner end of the log
- Large-end diameter: The diameter at the thicker end of the log
- Mid-diameter: The diameter at exactly half the length of the log
Log volume is a measure of log content, usually expressed in cubic metres (m³). It is calculated using the diameter and length of the log. The most common formula used is Huber's formula.
Huber's Formula
Huber's formula calculates volume using the log mid-diameter and log length. This formula assumes that the average cross-sectional area is found at the middle of the log.
V=4π×Dm2×L
Where:
- V = volume in cubic metres (m³)
- π = 3.14
- Dm = mid-diameter in metres
- L = length in metres
Worked Example
Given data: Mid-diameter (Dm) = 0.5 metres, length of the log (L) = 3 metres
Solution:
V=43.14×0.52×3
V=0.785×0.25×3
V=0.785×0.75
V=0.589 m3
The volume of the log is 0.589 m³.
The following procedure is used to record log dimensions in a tally sheet:
-
Collect logs: Gather the logs to be measured (usually at least six logs).
-
Measure length: Measure the length of each log using a measuring tape. Record the length in metres on the tally sheet.
-
Measure diameter: Measure the diameter of each log using callipers. Take two measurements at right angles and calculate the average. Record the mid-diameter in centimetres on the tally sheet.
-
Calculate volume: Using Huber's formula, calculate the volume of each log and record it in cubic metres.
-
Note defects: Inspect each log for defects such as knots, cracks, rot, or insect damage. Record any defects in the "Remarks" column.
-
Calculate totals: Add up all the lengths and volumes to get the total for the batch.
-
Clean and store tools: After completing the measurements, clean and store all tools, equipment, and safety gear properly.
Recording log dimensions accurately is important for several reasons:
- Inventory management: Provides an accurate count of logs received and processed
- Value estimation: Volume is used to determine the price of logs
- Production planning: Helps sawmills plan how much timber they can produce
- Quality control: Recording defects helps match logs to appropriate products
- Financial record-keeping: Ensures transparency in transactions between sellers and buyers
In Tanzania, a small-scale timber trader at the Morogoro or Tanga wood market uses a tally sheet daily when buying logs from local farmers. For example, when a farmer brings 10 logs to sell, the trader measures each log's diameter and length, calculates the volume using Huber's formula, and records everything in a tally book. The total volume determines how much money to pay — for instance, if the total volume is 5.5 m³ at TZS 150,000 per cubic metre, the farmer receives TZS 825,000. This accurate recording prevents disputes over payment and helps the trader know exactly how much timber they can produce for sale to furniture makers or construction companies.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
Interactive simulation: equipment for recording log dimensions in tally sheet
- Record log
- Adhere to safety principles
- Clean tools
- Store tools
Tathmini ya matokeo
Log dimensions in tally sheet - Select tools and properly in tally sheet.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The students should explain how to:
- Select tools and equipment for recording log dimensions
- Record log dimension in tally sheet
- Adhere to safety principles
Principles: The student should procedures.
Theories: The explain the importance of
Circumstantial knowledge:
Detailed knowledge about: Safety precautions involved in dimensions in tally
Swali
Which of the following information is recorded on a log tally sheet?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado