Mada za sehemu hiiSorting logsMada 4
- Receiving logs at log yard
- Sorting logs according to diameter class and species
- Recording log dimensions in tally sheet
- Determining daily logs volume processed
Determining Daily Log Volume Processed
Log volume is a measure of the amount of wood contained in a log, usually expressed in cubic metres (m³). Knowing how to calculate log volume helps sawmill operators plan production, price timber, and manage raw materials efficiently.
Determining log volume is important because it:
- Helps calculate the amount of timber that can be produced from a log
- Enables accurate pricing and payment for logs
- Supports production planning in a sawmill
- Ensures efficient use of wood resources
To calculate log volume, you need to measure two parameters:
- Diameter – measured in metres (m) using a calliper or diameter tape
- Length – measured in metres (m) using a measuring tape
The diameter is measured at different points depending on the formula used.
Three main formulas are used to calculate log volume. Each formula uses different diameter measurements.
1. Huber's Formula
Huber's formula uses only the mid-diameter (diameter at exactly half the length of the log). This formula assumes the log is cylindrical with a constant cross-section.
V=4π×Dm2×L
Where:
- V = Volume in cubic metres (m³)
- π = 3.14
- Dₘ = Mid-diameter in metres (m)
- L = Length in metres (m)
Worked Example 1
A log has a mid-diameter of 0.5 m and a length of 3 m. Calculate its volume using Huber's formula.
Solution
V=4π×Dm2×L
V=43.14×0.52×3
V=0.785×0.25×3
V=0.785×0.75
V=0.589 m3
The volume is 0.589 m³.
2. Smalian's Formula
Smalian's formula uses two diameters: the large-end diameter (D₁) and the small-end diameter (D₂). This formula is more accurate for tapered logs.
V=2A1+A2×L
Where:
- A₁ = Area at large end = (π ÷ 4) × D₁²
- A₂ = Area at small end = (π ÷ 4) × D₂²
- L = Length in metres
Worked Example 2
A log has a large-end diameter of 0.5 m, a small-end diameter of 0.4 m, and a length of 4.5 m. Calculate its volume using Smalian's formula.
Solution
Calculate cross-sectional areas:
A1=43.14×0.52=0.1963 m2
A2=43.14×0.42=0.1257 m2
Apply Smalian's formula:
V=20.1963+0.1257×4.5
V=20.322×4.5
V=0.161×4.5
V=0.7245 m3
The volume is 0.7245 m³.
3. Newton's Formula
Newton's formula uses three diameters: large-end (D₁), mid-diameter (Dₘ), and small-end (D₂). This is the most accurate method for logs with irregular taper.
V=6A1+4Am+A2×L
Where:
- A₁ = Area at large end
- Aₘ = Area at mid-diameter
- A₂ = Area at small end
- L = Length in metres
Worked Example 3
A log has a large-end diameter of 0.40 m, a mid-diameter of 0.30 m, a small-end diameter of 0.20 m, and a length of 6 m. Calculate its volume using Newton's formula.
Solution
Calculate areas:
A1=43.14×0.402=0.1257 m2
Am=43.14×0.302=0.0707 m2
A2=43.14×0.202=0.0314 m2
Apply Newton's formula:
V=60.1257+4(0.0707)+0.0314×6
V=60.1257+0.2828+0.0314×6
V=60.4399×6
V=0.4399 m3
The volume is 0.44 m³ (rounded).
| Formula | Diameters Used | Accuracy | Best For |
|---|---|---|---|
| Huber | Mid-diameter only | Moderate | Logs with constant taper |
| Smalian | Large and small ends | Good | Tapered logs |
| Newton | Large, mid, and small | Most accurate | Irregular logs |
Measuring Diameter
When using a calliper:
- Take two measurements at right angles to each other
- Calculate the average (mean) of the two readings
- If there is a swelling, measure above and below it and average the results
Measuring Length
- Use a metric measuring tape
- Measure from end to end in a straight line
- Record in metres
All measurements are recorded in a tally sheet. The tally sheet should include:
- Log number
- Species (type of tree)
- Length (m)
- Small-end diameter (cm)
- Large-end diameter (cm)
- Volume (m³)
- Defects or remarks
To determine the daily log volume processed at a sawmill:
- Select logs – Choose at least four logs to be measured
- Measure length – Record the length of each log in metres
- Measure diameter – Use callipers to measure diameters at appropriate points
- Calculate volume – Apply the appropriate formula (Huber's or Smalian's)
- Record results – Enter all data in the tally sheet
- Sum total volume – Add up volumes of all logs to get the total daily volume
A small-scale sawmill owner in Morogoro can use these volume calculations to determine how much timber they will produce from a batch of logs purchased from a local forest. By calculating the total volume in cubic metres, they can estimate the selling price (for example, TZS 150,000 per cubic metre) and ensure they are paying a fair price for the logs. This helps the business remain profitable and competitive in the local timber market.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
Interactive simulation: equipment for determining log volume
- Identify parameters for calculating log
- Adhere to safety principles
- Clean tools
- Store tools
Tathmini ya matokeo
Daily logs volume processed - Select tools and volume processed determined correctly.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The students should explain how to:
- Select tools and equipment for determining log volume
- Identify parameters for calculating log
- Adhere to safety principles
Principles: The student should be involved in determining the daily log volume processed
Theories: The explain the importance of determining daily logs volume
Circumstantial knowledge:
Detailed knowledge about: Safety precautions
Swali
Which formula for calculating log volume uses only the mid-diameter of the log?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado