Sonzaschool
Rudi

Sekondari ya Kawaida · Kidato cha Tatu · Amali · Agriculture and Food Processing

Wood Processing

Re-sawing cants and slabs

takriban dakika 3 kusoma

Majadiliano
Mada za sehemu hiiProducing sawn timberMada 5

Re-sawing is the process of cutting a thick, partially processed piece of wood (a cant or a slab) into thinner, finished boards of specific dimensions. This is the final stage in the sawmilling process where the width and thickness of the timber are determined to meet market specifications.

  • Cant: A piece of wood that has been cut on two or more sides but is still needs further processing. It is usually square or rectangular.
  • Slab: The outer cut of a log. One side is usually uneven and has bark (wane).
  • Re-sawing: The act of passing a cant or slab through a saw (usually a band saw) to rip it into thinner boards.

Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa

Tathmini ya mchakato

Group discussion: equipment for re-sawing cants and slabs

  • Re-sawing cants and slabs
  • Adhere to safety principles
  • Clean tools
  • Store tools

Tathmini ya matokeo

Cants and slabs - Select tools and slabs re-sawed correctly according to technical specifications.

Tathmini ya maarifa

Cants and knowledge of:

Method used: The students should explain how to:

  • Select tools and equipment for re-sawing cants and slabs
  • Re-sawing cants and slabs
  • Adhere to safety principles

Principles: The student should explain principles of re-sawing cants

Theories: The explain the importance of re-Circumstantial knowledge:

Detailed knowledge about: Safety precautions involved in re-

Swali

What is a cant in wood processing?

Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.

Ingia ili kufanya mazoezi

Mwalimu

Umekwama? Niulize chochote kuhusu mada hii.

Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.

Ingia ili kuuliza

Majadiliano

Hakuna maswali bado

Ingia ili kuuliza
Inapakia majadiliano…