Mada za sehemu hiiProcessing wood by-productsMada 5
- Categorising wood by-products
- Preparing wood by-products for value addition
- Adding value to wood by-products
- Storing added value products
- Handling wood by-products residues
Wood by-products residues are the leftover materials that remain after wood has been processed into useful products. These residues include sawdust, wood shavings, bark, off-cuts, and wood chips. Learning how to handle these materials properly is important because it ensures safety in the workshop, protects the environment, and allows some residues to be recycled or sold.
Wood processing produces different kinds of residues, each with its own characteristics:
- Sawdust – very fine particles produced when cutting or sanding wood
- Wood shavings – thin curled pieces produced by planing or peeling
- Bark – the outer covering removed from tree trunks
- Off-cuts – small pieces left after cutting timber to desired sizes
- Wood chips – small pieces produced during chipping or grinding operations
Improper handling of wood residues can cause:
- Health hazards – breathing in fine sawdust can damage the lungs over time
- Fire accidents – accumulated sawdust and dry wood pieces can catch fire easily
- Slippery working floors – scattered residues make floors dangerous to walk on
- Environmental pollution – disposing residues wrongly pollutes soil and water sources
Before handling any wood residues, a worker must wear the correct protective gear. The required equipment includes:
- Safety helmet – protects the head from falling objects
- Safety boots – protect feet from heavy materials and sharp objects
- Gloves – protect hands from splinters and chemical residues
- Dust mask – prevents breathing in fine sawdust and wood particles
- Safety glasses – protect eyes from flying dust and debris
- Overalls – protect the body from dust and scratches
Step 1: Preparation
Before starting, put on all required PPE. Select the tools for the job: a broom or brush, a shovel or scoop, sacks or bins with lids, and a trolley or wheelbarrow. Check that all equipment is in good condition (for example, that the trolley wheels turn freely) and that the storage area is clean and accessible.
Step 2: Collection
Use a broom, shovel and trolley or wheelbarrow to collect residues from the workshop floor and around machines. Clean around a machine only when it is switched off and has stopped completely; never reach under a guard or near a blade to clear sawdust. Sweep or scoop the materials carefully to avoid creating excessive dust. Never use your bare hands to collect sharp off-cuts.
Step 3: Sorting
Separate residues into categories:
- Dry sawdust and wood shavings (can be used for making particle boards or as fuel)
- Off-cuts (can be re-sawn into small items or used for craft work) and bark (can be used as fuel, mulch or compost)
- Contaminated residues (mixed with paint, glue, oil or wood preservative; keep these apart and dispose of them separately, and never burn them as fuel or use them as animal bedding or compost)
Step 4: Transportation
Place collected residues into the trolley. Do not overload the trolley. Push the trolley carefully to the storage area, keeping your path clear. When lifting sacks or off-cuts, bend your knees, keep your back straight and ask for help with heavy loads.
Step 5: Storage
Store residues in a designated storage room or bin:
- Keep the storage area dry to prevent mould and decay; damp heaps of sawdust can also heat up on their own
- Position storage away from heat sources and open flames
- Label storage containers clearly
- Maintain good ventilation in the storage area
- Do not allow smoking, and empty the bins regularly so that large heaps do not build up
- Store value-added products such as briquettes, boards and craft items off the floor on pallets or shelves, in stable stacks that are not too high, with clear gangways, away from fire and damp
Step 6: Disposal or Recycling
Dispose of residues that cannot be used:
- Follow local regulations for waste disposal
- Consider selling usable residues to local craftspeople or briquetting factories
- Compost bark and natural wood pieces if appropriate
Step 7: Cleaning and Storing Tools
When the work is finished:
- Brush dust and chips off the broom, shovel and trolley; do not blow dust off with compressed air, because this fills the air with fine dust
- Wipe the tools, check them for damage and report any fault
- Return the tools and trolley to their proper places in a dry store
- Brush down your overalls, throw away a used disposable dust mask or clean a reusable one, and wash your hands and face
A Form 3 student working in the school workshop has finished using the band saw and notices sawdust accumulated on the floor and around the machine. To handle this residue properly, the student should:
- Switch off the band saw, wait until the blade has stopped completely, then put on dust mask, safety glasses, gloves, and overalls
- Use a broom to sweep the sawdust into a pile (avoiding vigorous sweeping that creates dust clouds)
- Scoop the collected sawdust into a trolley
- Transport the trolley to the sawdust storage bin
- Empty the sawdust into the bin and close the lid
- Brush off the broom and trolley and return them to their storage place
- Always wear PPE before handling any residues
- Never eat or drink while working with wood residues
- Wash hands thoroughly after handling residues
- Report any injuries or allergic reactions immediately
- Keep water or fire extinguisher nearby when handling dry residues
In Tanzania, small-scale carpentry workshops in towns like Arusha and Mwanza produce large amounts of sawdust daily. A carpentry shop owner can sell this sawdust to local briquetting companies that compress it into fuel blocks, earning extra money from material that would otherwise be thrown away. Proper handling and storage of these residues ensures the material stays dry and clean, allowing the owner to earn extra income while keeping the workshop safe and organised.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
- Select tools and equipment for handling wood by-products residues
- Handle wood by-products residues
- Adhere to safety principles
- Clean tools
- Store tools
Tathmini ya matokeo
Wood by-products residues handled as per technical specifications
Tathmini ya maarifa
Detailed knowledge of:
Method used: The students should explain:
- Importance of handling wood by-products residue properly
- Safety principles when storing added value products
Principles: The student should explain the principles of handling wood by-products residue properly
Theories: The student should explain procedures for handling wood by-products residue properly
Circumstantial knowledge:
Detailed knowledge about: Safety precautions involved in handling wood by-products residue properly
Swali
What name is given to the very fine wood particles produced when wood is cut or sanded?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado