Mada za sehemu hiiMeasuring electric quantitiesMada 5
- Measuring voltage in the circuit
- Measuring current in the circuit
- Measuring resistance in the circuit
- Carrying out insulation test
- Carrying out earthing test
Measuring Current in a Circuit
Electric current is the flow of electric charge through a conductor, such as a wire. In refrigeration and air conditioning systems, measuring current is essential to check if the compressor, fan motors, and other electrical components are operating correctly. Too much or too little current can indicate a fault in the system.
Electric current is measured in amperes (A), often called "amps." One ampere represents the flow of one coulomb of charge per second past a point in a circuit.
I=tQ
Where:
- I = current in amperes (A)
- Q = charge in coulombs (C)
- t = time in seconds (s)
Ammeter
An ammeter is a device specifically designed to measure electric current. It has a low internal resistance so that connecting it to the circuit does not change the current flow.
Multimeter
A multimeter is a versatile tool that can measure voltage, current, and resistance. When measuring current, set the dial to the appropriate ampere range (A or mA).
When measuring current, the ammeter must be connected in series with the component whose current you want to measure. This means the current flows directly through the ammeter.
Steps to Connect an Ammeter
- Switch off the power supply before wiring.
- Identify the component whose current you want to measure (for example, a refrigerator compressor motor).
- Disconnect one wire of the component from the circuit.
- Connect the positive terminal of the ammeter to the wire leading toward the component.
- Connect the negative terminal of the ammeter to the wire leading away from the component.
- Switch on the power supply and read the current value on the display.
- Switch off the power before disconnecting the ammeter.
A small refrigeration compressor draws a current of 2.5 amperes when running normally. A student connects a digital multimeter set to the 10A range in series with the compressor. The multimeter displays 2.5 A.
Question: Is the compressor operating within normal limits?
Answer: Yes, the current reading of 2.5 A is within the normal operating range for this compressor. If the reading were higher (for example, 4.0 A), it could indicate an overload or a fault in the motor winding. If it were lower (for example, 0.5 A), it could indicate a weak motor or a problem with the electrical supply.
When measuring current in refrigeration and air conditioning systems:
- Always wear safety boots and overalls when working with electrical equipment.
- Use HT safety gloves when working with high-voltage components.
- Ensure the power supply is switched off before connecting or disconnecting the ammeter.
- Never connect an ammeter in parallel (across) a component; this can cause a short circuit and damage the meter.
- Electric current is the flow of charge measured in amperes (A).
- An ammeter or multimeter is used to measure current.
- The measuring instrument must be connected in series with the circuit component.
- Always follow safety procedures when working with electrical circuits.
In Tanzania, refrigerator and air conditioning technicians regularly measure current when servicing equipment in shops, hospitals, and homes. For example, when a shopkeeper's cold room in Dar es Salaam stops cooling properly, a technician uses a multimeter to check if the compressor is drawing the correct current. If the reading is too high, it may mean the compressor is failing and needs repair or replacement — a quick current measurement helps diagnose the problem before buying expensive new parts.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
- Determine component values
- Connect simple electric circuits
- Perform soldering
- Measure electric quantities
- Clean workplace and tools
- Store tools, materials and equipment
Tathmini ya matokeo
Electrical quantities measured conform to IEEE standards
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to:
- Measure component values
- Read colour codes
- Calculate electric quantities
- Determine the values of components using colours codes
- Measure current
Principles: The student should explain principle of:
- Connecting electrical circuits in combination
Theories: The student should explain:
- Different component ratings
- Types of electric circuit connections
- Verification of electric rules and laws
- Importance of component ratings
- Types and uses of measuring and testing instruments
Detailed knowledge about:
- Safe handling of working tools Safe handling of measuring instruments
Swali
What is the SI unit of electric current?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado