Mada za sehemu hiiServicing domestic refrigeratorsMada 2
- Servicing electric circuitry
- Refilling refrigerant
Refilling refrigerant is the process of adding a refrigerant gas back into a refrigeration system after it has been lost due to a leak or during repair work. This is a essential skill for anyone servicing domestic refrigerators, as the correct amount of refrigerant ensures the refrigerator cools properly and operates efficiently.
Refrigerant may need to be refilled when:
- The system has developed a leak and lost refrigerant
- The refrigerator is not cooling properly and low refrigerant is diagnosed
- Refrigerant was removed during repair work and needs to be replaced
Before refilling refrigerant, always observe these important safety rules:
- Wear safety goggles, safety boots, overall, and a nose mask
- Work in a well-ventilated area to avoid breathing refrigerant vapors
- Keep sparks and open flames away from the work area
- Never overfill the system with refrigerant
- Use a leak detector to check for any leaks after refilling
The following tools are required for refilling refrigerant:
- Vacuum pump for removing air and moisture from the system
- Refrigerant cylinder with the correct type of refrigerant
- Charging hose and manifold gauge
- Leak detector
- Pinch-off tool
- Dial type thermometer
- Screwdrivers and other basic tools
Step 1: Identify the Problem
First, diagnose that the refrigerator actually needs refrigerant by checking if it is not cooling properly. Use the dial type thermometer to measure the temperature inside the refrigerator compartment.
Step 2: Locate and Repair the Leak
Before refilling, use the leak detector to find any leaks in the system. Repair the leak using appropriate methods such as brazing with the oxy-acetylene welding set.
Step 3: Evacuate the System
Connect the vacuum pump to the system and run it for at least 15-30 minutes. This removes air and moisture from the system, which would otherwise cause problems in the refrigeration cycle.
Step 4: Charge the Refrigerant
Connect the refrigerant cylinder to the charging hose. Open the valve slowly and allow the refrigerant to enter the system. The amount of refrigerant charged must exactly match the manufacturer's specification.
Step 5: Check for Leaks
After charging, use the leak detector to verify that no leaks are present. If a leak is found, repair it and recharge if necessary.
Step 6: Test the System
Run the refrigerator and check that it cools properly. Use the dial type thermometer to verify that the internal temperature reaches the correct level (typically 0°C to 4°C for fresh food compartment).
A domestic refrigerator in a household in Dar es Salaam is not cooling properly. The technician uses a manifold gauge and finds that the low-side pressure is very low, indicating refrigerant loss. After using the leak detector, a small leak is found at the evaporator coil connection. The technician repairs the leak, evacuates the system using the vacuum pump for 20 minutes, and then recharges the system with 50 grams of R-134a refrigerant (the correct amount for this refrigerator model). After testing, the refrigerator temperature drops to 3°C, which is within the proper range.
- Always evacuate the system before recharging to remove air and moisture
- Use the exact type and amount of refrigerant specified by the manufacturer
- Never overcharge the system as this can cause damage and poor performance
- Always check for leaks after refilling
- Follow all safety precautions when handling refrigerants
In Tanzania, many households and small businesses depend on domestic refrigerators to preserve food, medicine, and shop goods. When a refrigerator loses its refrigerant and stops cooling properly, a technician with the skill to refill refrigerant can repair it locally instead of requiring the owner to buy a new refrigerator — saving a family or shop owner potentially TZS 300,000 to TZS 800,000 in replacement costs. This skill also creates income opportunities for young technicians in towns like Arusha, Mwanza, and Dodoma who offer refrigeration repair services.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
- Select appropriate tools and equipment
- Measure pressure and temperature quantities
- Identify type of refrigerant
- Determine correct quantity of refrigerant
- Charge a system with refrigerant
- Performing brazing
- Connect piping circuits
- Store tools and equipment
- Clean workplace
Tathmini ya matokeo
A record of values of the refrigerator cold chamber temperatures, electrical quantities and pressure gauges readings conforming to the specified ratings
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to:
- Measure electric quantities
- Measure pressure quantities
- Connect simple electric circuits
- Identify refrigerant types
Principles: The student should explain the principles of:
- Refilling a refrigerator with fresh refrigerant
- Connecting electrical circuits in parallel, series and in combination
- Making leakproof brazed or soldered joints
- Taking different measurements of both electrical quantities and pressure quantities
Theories: The student should explain:
- Compression refrigeration cycle
- Types of electric circuit connections
- Compressor rating
Detailed knowledge about:
- Safe handling of working tools
- Safe handling of measuring instruments Environmental regulations
Swali
Which of the following is a reason why refrigerant may need to be refilled in a domestic refrigerator?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado