Mada za sehemu hiiConstructing geometrical figuresMada 7
A circle is a closed curved line where every point on the line is the same distance from a fixed point called the centre. In Technical Drawing, we use circles to create many useful shapes and patterns. The compass is the main tool we use to draw circles accurately.
Before constructing circles, make sure you have these drawing instruments:
- Compass (drawing compass)
- Ruler (30 cm)
- Sharpened pencil (2H or HB)
- Set square (optional)
- Eraser
- Drawing paper or worksheet
To draw a circle with a given radius, follow these steps:
- Measure the radius using your ruler. For example, if you need a circle with radius 3 cm, measure 3 cm from the ruler and mark that distance on your compass.
- Fix the compass by tightening the hinge so the pencil and needle are exactly 3 cm apart.
- Mark the centre on your paper where the circle will be drawn.
- Place the needle of the compass firmly at the centre point.
- Rotate the compass clockwise or counterclockwise while keeping the needle steady. The pencil will draw the circle.
Worked Example
Draw a circle with radius 2.5 cm.
Solution:
- Step 1: Set compass to 2.5 cm using ruler
- Step 2: Mark point O as the centre
- Step 3: Place needle at O, rotate compass to draw the circle
- Result: A complete circle with diameter 5 cm
Concentric circles are circles that share the same centre point but have different radii. They look like the rings of a target or the ripples of water when a stone is dropped.
How to Construct Concentric Circles
- Draw the first (inner) circle with the smaller radius.
- Without moving the centre, change the compass setting to the next radius.
- Draw the second circle around the first one.
- Repeat for additional concentric circles as needed.
Worked Example
Construct three concentric circles with radii 1.5 cm, 2.5 cm, and 3.5 cm, all sharing centre point O.
Solution:
- Step 1: Mark centre point O on paper
- Step 2: Set compass to 1.5 cm, draw first circle
- Step 3: Set compass to 2.5 cm, draw second circle
- Step 4: Set compass to 3.5 cm, draw third circle
- Result: Three circles with common centre O, growing larger outward
Eccentric circles are circles that have different centre points. They are not concentric because each circle has its own centre location.
How to Construct Eccentric Circles
- Mark the first centre point (call it O₁) and draw the first circle.
- Mark a different centre point (call it O₂) at some distance from O₁.
- Draw the second circle with its centre at O₂.
- Continue marking new centres and drawing circles as required.
Inscribing means drawing a circle inside a triangle so that the circle touches all three sides of the triangle. The circle must be tangent (touch) to each side.
Construction Steps
- Draw triangle ABC with the given dimensions.
- Construct angle bisectors for any two angles (A and B):
- With centre at A, draw an arc cutting both sides of the angle
- From each intersection, draw arcs that cross inside the angle
- Draw the bisector line from A through the intersection point
- Repeat for angle B
- Find the incenter where the two bisectors meet. This is the centre of the inscribed circle.
- Drop a perpendicular from the incenter to any side of the triangle. Measure this distance — this is the radius.
- Set your compass to this radius and draw the inscribed circle.
Worked Example
Inscribe a circle in triangle ABC with sides AB = 6 cm, BC = 7 cm, and AC = 5 cm.
Solution:
- Draw triangle ABC with given sides
- Construct angle bisectors of angles A and B
- Mark intersection point I (incenter)
- From I, draw perpendicular to side BC, measuring 1.4 cm
- Set compass to 1.4 cm and draw circle with centre I
- The circle touches all three sides of the triangle
Circumscribing means drawing a circle around a triangle so that all three vertices of the triangle lie on the circle.
Construction Steps
- Draw triangle ABC with the given dimensions.
- Construct perpendicular bisectors of any two sides (AB and BC):
- With centre at A, draw an arc larger than half of AB
- With same radius, draw an arc from B — the two arcs intersect
- Repeat from points on side BC
- Draw the perpendicular bisector line through the intersections
- Find the circumcenter where the two bisectors meet. This is the centre of the circumscribed circle.
- Measure the distance from the circumcenter to any vertex (A, B, or C). This is the radius.
- Set your compass to this radius and draw the circle with the circumcenter as centre.
- Circle: A closed curve with all points equidistant from the centre
- Radius: Distance from centre to any point on the circle
- Diameter: Twice the radius, passes through the centre
- Concentric circles: Same centre, different radii
- Eccentric circles: Different centres
- Inscribed circle: Touches all sides of a triangle from inside
- Circumscribed circle: Passes through all vertices of a triangle from outside
- Not tightening the compass enough, causing the radius to change while drawing
- Placing the compass needle incorrectly, resulting in an off-centre circle
- Forgetting to measure the radius accurately before drawing
- Not using a sharp pencil in the compass, producing thick or uneven lines
- Rushing the angle bisector construction, leading to an incorrect incenter
- Always start with a sharp 2H or HB pencil
- Keep your compass hinges tight throughout the drawing
- Check your radius measurement twice before drawing
- Practice drawing circles freehand first to build confidence
- Use light construction lines, then strengthen the final circle
In Tanzania, circle construction skills are used by artisans and craftspeople when making traditional items such as decorative plates, circular patterns on kanga fabrics, and round wooden furniture. For example, a carpenter in Dar es Salaam constructing a round dining table top would use concentric circles to mark the wood before cutting, ensuring the table is perfectly round and balanced.
Jinsi utakavyotathminiwaTathmini ya mchakato
Tathmini ya mchakato
Circles are constructed as per given instructions.
Swali
Which of the following defines a circle in geometry?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado