Mada za sehemu hiiConstructing geometrical figuresMada 7
An ellipse is a closed curve that looks like a stretched circle. It is one of the conic sections and is defined as the set of all points in a plane where the sum of the distances from two fixed points (called foci) is constant. In technical drawing, ellipses are commonly used to represent circular objects viewed at an angle, such as holes, pipes, and cylindrical objects.
- Major axis: The longest diameter of the ellipse, passing through the center. It is twice the semi-major axis.
- Minor axis: The shortest diameter of the ellipse, passing through the center. It is twice the semi-minor axis.
- Center (O): The midpoint of both the major and minor axes.
- Foci (F₁ and F₂): Two fixed points on the major axis, equidistant from the center. The sum of distances from any point on the ellipse to both foci is constant.
- Semi-major axis (a): Half the length of the major axis.
- Semi-minor axis (b): Half the length of the minor axis.
There are several methods to construct an ellipse. The choice of method depends on the dimensions given and the drawing tools available.
1. Concentric Circles Method (Auxiliary Circle Method)
This method uses two circles with radii equal to the semi-major and semi-minor axes.
Steps:
- Draw the major axis AB and minor axis CD, intersecting at the center O at right angles.
- With O as center, draw two concentric circles:
- One circle with radius equal to the semi-major axis (a)
- Another circle with radius equal to the semi-minor axis (b)
- Divide both circles into 12 equal parts (using 30° angles).
- From each division point on the outer circle, draw vertical lines downward.
- From each corresponding division point on the inner circle, draw horizontal lines to the right.
- The intersections of these vertical and horizontal lines are points on the ellipse.
- Join the points with a smooth freehand curve or using a French curve.
2. Rectangular Method (Box Method)
This method draws a rectangle with sides equal to the major and minor axes, then uses arcs to form the ellipse.
Steps:
- Draw the major axis AB and minor axis CD intersecting at center O.
- Complete rectangle ABDE by drawing lines:
- From A, draw a line perpendicular to AB equal to half the minor axis (b) upward to E
- From B, draw a line perpendicular to AB equal to half the minor axis (b) upward to D
- Connect E and D horizontally
- Divide OA into any number of equal parts (e.g., 4).
- Divide AE into the same number of equal parts.
- From points on OA, draw lines to D.
- From points on AE, draw lines to B.
- The intersections of these lines form one-quarter of the ellipse.
- Repeat for the other three quadrants or use symmetry to complete the ellipse.
3. Trammel Method (Ordinate Method / Foci Method)
This method uses the definition of an ellipse as the path of a point where the sum of distances to two foci is constant.
Steps:
- Draw the major axis AB and minor axis CD intersecting at center O.
- Locate the foci F₁ and F₂ on the major axis using the relation: F1O=F2O=a2−b2
- Take any point P on the major axis.
- With F₁ as center and radius equal to the major axis half-length (a), draw an arc.
- With F₂ as center and radius equal to the remaining portion (a - OP), draw another arc.
- The intersection of these arcs gives points on the ellipse.
- Repeat for other positions of P along the major axis.
- Connect the points smoothly.
4. Four-Center Method (Approximate Method)
This method uses arcs of circles to approximate an ellipse. It is quick but less accurate.
Steps:
- Draw the major axis AB and minor axis CD intersecting at center O.
- On the major axis, mark points E and F such that OE = OF = b (the semi-minor axis).
- With E as center and radius EA (or EB), draw an arc intersecting the minor axis extension.
- With F as center and the same radius, draw an arc intersecting the other side.
- The centers of these four arcs form the approximate ellipse.
- Join the arcs with smooth curves.
Problem: Construct an ellipse with a major axis of 100 mm and a minor axis of 60 mm using the concentric circles method.
Solution:
-
Draw the axes:
- Draw horizontal line AB = 100 mm (major axis)
- Draw vertical line CD = 60 mm (minor axis)
- Mark O as the intersection (center)
-
Draw concentric circles:
- With O as center, draw circle radius OA = 50 mm (semi-major axis = 50 mm)
- With O as center, draw circle radius OC = 30 mm (semi-minor axis = 30 mm)
-
Divide the circles:
- Using a protractor, mark angles every 30° (0°, 30°, 60°, 90°, 120°, 150°, 180°, etc.)
- This gives 12 division points on each circle
-
Find ellipse points:
- From each point on the outer circle, draw vertical lines downward
- From each corresponding point on the inner circle, draw horizontal lines
- Mark where each vertical meets its corresponding horizontal — these are points on the ellipse
-
Draw the ellipse:
- Join all marked points with a smooth freehand curve or using a French curve
- Always draw construction lines lightly in pencil (2H or HB) before finalizing with a darker pencil (H or 2B).
- Ensure the major and minor axes are perpendicular to each other.
- Use a French curve or ellipse template for smooth final lines.
- For accurate work, use more division points (more than 12) to get a smoother curve.
- Forgetting to mark the center correctly
- Using the wrong radii for the concentric circles
- Not keeping construction lines light for easy erasing
- Joining points with straight lines instead of curves
In Tanzania, ellipse construction is used in technical drawing for civil engineering and architecture. When a Tanzanian draughtsperson draws plans for a building, they use ellipses to represent circular water tanks or septic tanks seen from above at an angle. A local hardware shop owner in Dar es Salaam might look at technical drawings that include elliptical features when ordering cylindrical storage containers or when reading architectural plans for a new shop construction in Arusha or Mwanza.
Jinsi utakavyotathminiwaTathmini ya mchakato
Tathmini ya mchakato
Ellipses are constructed as per given methods.
Swali
What is the semi-major axis of an ellipse?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado