Mada za sehemu hiiConstructing oblique projectionMada 3
- Constructing square and rectangular boxes in oblique projection
- Constructing stepped blocks in oblique projections
- Constructing circles and cylindrical shapes in oblique projection
Oblique projection is a method of drawing three-dimensional objects on a flat sheet of paper. In this type of drawing, the front face of the object is drawn true shape and size (true scale), while the depth lines are drawn at an angle—usually 45°—to give the illusion of three dimensions. The front face is drawn parallel to the drawing paper, and the receding lines (depth) go backwards at an angle.
This makes oblique projection easier to understand than perspective drawing because the front face shows the true proportions of the object.
There are two main types of oblique projection that you must know:
Cavalier Oblique Projection
In cavalier oblique projection, all receding lines (depth) are drawn full scale (true length). This means if the depth of the box is 3 cm, you draw the receding lines at 3 cm. The angle for receding lines is usually 45°.
- Advantage: Shows full depth measurement
- Disadvantage: The drawing can appear stretched or distorted
Cabinet Oblique Projection
In cabinet oblique projection, the receding lines (depth) are drawn at half scale (half the true length). For example, if the true depth is 4 cm, you draw it as 2 cm. The angle remains 45°.
- Advantage: The drawing looks more realistic and less distorted
- Disadvantage: Depth is not shown at true scale
A square box has equal length, width, and height. Follow these steps to draw a 3 cm × 3 cm × 3 cm square box in cavalier oblique projection:
Step 1: Draw the Front Face
- Draw a square of 3 cm × 3 cm on your paper. This is the front face.
- Label it ABCD where AB = 3 cm, BC = 3 cm, CD = 3 cm, and DA = 3 cm.
Step 2: Draw the Receding Lines
- From point A, draw a line at 45° angle. Make it 3 cm long (full scale for cavalier). Label the end point as E.
- From point B, draw another 45° line. Make it 3 cm long. Label the end point as F.
- From point D, draw another 45° line. Make it 3 cm long. Label the end point as G.
Step 3: Complete the Back Face
- Connect points E, F, and G to form the back face.
- Join E to F, F to G, and G to E.
- Your square box is now complete. Points E, F, and G form the back face EFGH (where E connects to F, F to G, G to E, and H is the corner behind D).
Step 4: Add Hidden Lines (Optional)
- In some drawings, you may show the hidden edges as dashed lines to make the drawing clearer.
A rectangular box has different length, width, and height. Let us draw a rectangular box with dimensions: length 4 cm, width 2 cm, and height 3 cm in cavalier oblique projection.
Step 1: Draw the Front Face
- Draw a rectangle with length 4 cm and height 3 cm.
- Label the corners: A (bottom left), B (bottom right), C (top right), D (top left).
- So AB = 4 cm, BC = 3 cm, CD = 4 cm, DA = 3 cm.
Step 2: Draw the Receding Lines
- From point A, draw a line at 45° angle. Make it 2 cm long (the width/depth). Label it as E.
- From point B, draw a line at 45° angle. Make it 2 cm long. Label it as F.
- From point D, draw a line at 45° angle. Make it 2 cm long. Label it as G.
Step 3: Complete the Back Face
- Connect E, F, and G to form the back rectangle.
- Join E to F, F to G, and G to E.
- Your rectangular box is complete with front face ABCD and back face EFGH.
Question: Draw a rectangular box measuring 5 cm (length) × 3 cm (width) × 4 cm (height) in cabinet oblique projection.
Solution:
-
Front face: Draw rectangle 5 cm × 4 cm.
- AB = 5 cm (length), BC = 4 cm (height).
-
Receding lines (at half scale):
- Width = 3 cm, so draw each receding line as 1.5 cm (half of 3 cm).
- From A, draw 45° line = 1.5 cm → point E
- From B, draw 45° line = 1.5 cm → point F
- From D, draw 45° line = 1.5 cm → point G
-
Back face:
- Connect E to F, F to G, and G to E.
- Rectangle EFGH is the back face.
The drawing now shows a rectangular box in cabinet oblique projection, where the depth appears shorter (half scale) making the drawing look more realistic.
- In oblique projection, always draw the front face true shape and true size.
- The angle for receding lines is usually 45°.
- Cavalier uses full scale for depth; cabinet uses half scale.
- Use a 45° set square or protractor to draw accurate 45° angles.
- All parallel edges must remain parallel in your drawing.
- Hidden lines (dashed) show edges that cannot be seen from the front.
- Drawing board
- T-square or set square
- pencils (HB and 2H)
- Ruler or scale
- Protractor or set square for 45° angles
- Eraser
- Drawing receding lines at wrong angles (not 45°)
- Using wrong scale for depth (mixing up cavalier and cabinet)
- Not keeping receding lines parallel to each other
- Measuring depth from the wrong corner
- Forgetting to complete the back face
- Always start by drawing the front face first.
- Lightly sketch all lines first, then darken after checking accuracy.
- Label your corners clearly to avoid confusion.
- Practice with different box sizes to master both cavalier and cabinet projections.
In Tanzania, oblique projection drawings are used in small-scale construction projects, such as drawing plans for a rectangular water tank or a concrete block foundation. A local artisan or mason can use these technical drawings to communicate the exact size and shape of a rectangular structure before building, ensuring materials are measured correctly and the structure fits the intended space.
Jinsi utakavyotathminiwaTathmini ya mchakato
Tathmini ya mchakato
Types of oblique projections are described, and square and rectangular boxes are constructed in oblique projection.
Swali
In oblique projection, which part of the object is drawn true shape and true size?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado