Oblique Projection: Circles and Cylindrical Shapes
In oblique projection, we draw objects showing three faces: the front face in true shape, and the top and side faces receding backwards. Circles and cylindrical shapes require special treatment because they appear as ellipses when viewed at an angle. This study note shows how to draw circles and cylinders correctly in oblique projection.
Drawing Circles on Inclined Faces
When a circle lies on a face that recedes into the drawing (not the front face), it appears as an ellipse in oblique projection. The key rule is:
- Front face circles: Draw as true circles using compass
- Top or side face circles: Draw as ellipses
Steps to Draw an Ellipse for an Inclined Circle
- Find the center of the ellipse on the receding face
- Draw the major axis (long diameter) at the same angle as the receding lines (usually 45°)
- Draw the minor axis (short diameter) perpendicular to the major axis
- Use the four-center method or draw the ellipse through these points
The major axis length equals the true circle diameter. The minor axis is foreshortened according to the projection angle.
Four-Center Ellipse Method
This is the standard method taught at Form 1:
- Draw the enclosing rectangle for the ellipse
- Find the center points for the two pairs of arcs
- Draw two small arcs from the top and bottom centers
- Draw two large arcs from the side centers
- Smooth the arcs together to form the ellipse
Drawing a Cylinder in Oblique Projection
A cylinder consists of two circular ends connected by parallel lines (generators).
Steps
- Draw the front face: Draw a true circle using compass at the front of the object
- Draw the back face: Transfer the center backwards along the receding axis (at 45°). From this new center, draw an ellipse of the same size as the front circle
- Connect the edges: Draw two lines from the front circle's sides to the back ellipse's sides. These lines are parallel to the receding axis
- Show hidden lines: Draw dashed lines for the back half of the front circle and the front half of the back ellipse
Worked Example
Draw a cylinder of diameter 40 mm and height 60 mm in oblique projection (45° receding angle).
Step 1: Draw the front face as a true circle of diameter 40 mm. Label the center O.
Step 2: From center O, measure 60 mm at 45° backwards. This is the center O' of the back face.
Step 3: At O', draw an ellipse with:
- Major axis = 40 mm at 45°
- Minor axis = foreshortened (approximately 28 mm vertical)
Step 4: Draw two parallel lines from the leftmost and rightmost points of the front circle to the corresponding points on the back ellipse.
Step 5: Complete the curves by drawing the visible portions of each circle as smooth continuous lines.
Key Points to Remember
- Circles on the front face remain true circles
- Circles on receding faces become ellipses
- The receding angle is usually 45° in student drawings
- All receding lines are parallel to each other
- Cylinder edges are parallel to the receding axis
Real-life application
In Tanzania, drafters use oblique projection when drawing simple mechanical parts, pipes, and tanks. For example, a plumber designing a water storage tank or a technician sketching a simple machine component would use these techniques to communicate dimensions clearly to workers on a construction site in Dar es Salaam or Arusha.