Mada za sehemu hiiConstructing locus of mechanismMada 1
- Constructing locus of various
A locus is the path traced by a point as it moves under specific conditions. In technical drawing, loci are used to understand how machine components move. When a point moves while keeping equal distance from a fixed point or line, it creates predictable paths that engineers use to design mechanical systems.
An involute is the path traced by a point on a string as it is wound or unwound around a circle without slipping. This curve is commonly seen in gear teeth profiles.
Key Terms
- Base circle: The circle around which the string is wound
- Generating point: The point at the free end of the string that traces the path
- Tangent lines: Lines drawn at equal divisions on the circle, along which the point moves
Procedure for Drawing an Involute
-
Draw the base circle with the given radius. Mark the centre O and divide the circle into 12 equal divisions (points 1 to 6 for half the involute).
-
Draw tangents at points 1, 2, 3, 4, 5 and 6.
-
Mark the unwound length: From point 6, measure a length equal to half the circumference of the circle to get point G.
-
Divide the unwound length into six equal parts.
-
Mark points along tangents:
- From point 1, mark point B such that 1B equals one part of line 6G
- From point 2, mark point C such that 2C equals two parts of line 6G
- Continue this pattern for points 3, 4, 5
-
Join the points A through G with a smooth curve using a French curve. This curve is the involute.
Worked Example: Involute from Activity 2.1
A semi-circular plate with radius 32 mm has centre C. A rope of length 140 mm is fixed at point O, which is 20 mm above and 20 mm to the left of C. The rope is wound anticlockwise around the plate. Draw the locus of the free end P.
Solution Steps:
- Draw a semi-circle with radius 32 mm and centre C.
- Draw a horizontal line 20 mm above C. Mark point O, 20 mm left of C. Draw OP = 140 mm.
- Divide the semi-circle into six equal parts. Label them 1 to 7. Join each point to centre C.
- Rotate OP about O until it meets the semi-circle at point 1. Mark this as 1' on the rope.
- Mark point 7' on line 1'P such that 1'7' = πR = 100.48 mm. Divide 1'7' into six equal parts (1', 2', 3', ... 7').
- Draw tangents at points 1, 2, 3, ... 7. From each tangent point, mark distances equal to corresponding parts on 1'7'.
- Join the marked points P₁, P₂, ... P₇ with a smooth curve. This is the involute.
An Archimedean spiral is the locus of a point that moves away from a fixed point while a line rotates around that point at constant speed. The point moves with uniform linear and angular velocity.
Key Concept
When a line rotates through 360° while a point moves along it, one complete movement is called a convolution.
Procedure for Drawing an Archimedean Spiral
-
Draw a circle of your chosen diameter (for example, 90 mm). Divide it into an even number of equal divisions (8 divisions = 45° each).
-
Divide the radius into the same number of equal parts as the circle divisions.
-
Draw radial lines from the centre to each division point on the circle.
-
Transfer the radial divisions: From each division point on the circle, mark the corresponding radial distance along the radial line.
-
Join the intersection points with a smooth curve to form the spiral.
Note
The spiral can start at any point along a radius, but the divisions must always be equal.
When a ladder slides against a wall, the path traced by a point on the ladder (such as a person's foot) creates a locus. This demonstrates how loci help check if there is enough clearance around moving objects.
Practical Understanding
- The ladder's top slides down the wall while the bottom slides along the ground
- A point on the ladder traces a curved path
- Engineers use this to ensure safety clearance in designs
A crank and slider mechanism converts rotational motion into linear motion. The crank rotates, driving a connecting rod that moves a slider back and forth along a straight line.
Procedure for Constructing the Locus
-
Draw the mechanism and divide the crank rotation into 12 equal parts.
-
Number each crank position (0 to 12).
-
Strike arcs: From each crank position, draw arcs that intersect the slider's path line, using the connecting rod length as the radius.
-
Mark intersection points where each arc crosses the slider's line of motion.
-
Join the points with a smooth curve to show the slider's path (locus of the piston).
-
Optional: If required, mark points along the connecting rod to show the locus of its centre or other points.
A helix is the path of a point that moves around a cylinder while simultaneously moving along its axis. This is commonly seen in screw threads and springs.
Key Terms
- Pitch: The axial distance the point travels during one complete revolution
- Convolution: One complete 360° turn of the helix
Procedure for Drawing a Right-Hand Cylindrical Helix
-
Draw front elevation and plan views of the cylinder.
-
Divide the plan view (circle) into 12 equal parts and label them.
-
Project points from the circumference up to the front elevation.
-
Divide the pitch (lead) into the same number of equal parts as the base circle.
-
Draw intersection lines from the pitch divisions to meet the projected lines from the base.
-
Join the intersection points to form the helix curve.
-
Note: The upper half of the helix is shown as dotted lines because it lies behind the visible surface.
This involves plotting the path of a point on a linkage system where multiple components move together, such as a crank rotating while connected to a lever.
Procedure for Constructing Locus of Multiple Points
-
Draw centre lines as given in the problem.
-
Draw the given layout, including the circle with radius equal to the crank length.
-
Divide the crank circle into 8 or 12 equal parts.
-
Draw arcs from each division point using the link length as radius.
-
Locate positions of the connecting link as the crank rotates around the circle.
-
Find point positions on the link corresponding to the moving point.
-
Join all point positions with a smooth curve to show the locus.
Worked Example: Link Mechanism (from Example 2.1)
Plot the locus of the midpoint P of connecting rod JM for one revolution of crank OJ.
Solution Steps:
- Draw centre lines and the given layout with circle radius OJ.
- Divide the circle into 12 equal parts.
- Using KM as radius, draw arc NL.
- Draw different positions of link JM at each crank position.
- Locate position of point P on each link position (midpoint).
- Join all P points with a smooth curve. This is the required locus.
| Type of Curve | Generating Condition |
|---|---|
| Involute | String unwinding from a circle |
| Archimedean Spiral | Point moving away while line rotates |
| Cycloid | Circle rolling on a straight line |
| Epicycloid | Circle rolling outside another circle |
| Hypocycloid | Circle rolling inside another circle |
| Trochoid | Point inside or outside rolling circle |
In Tanzania, understanding loci is practical for small engine repair and bicycle mechanics in towns like Arusha and Mwanza. When a mechanic repairs a bicycle's chain and sprocket system or services a motorbike's piston connected to a crank, they are working with mechanisms whose components follow specific loci. Knowledge of these paths helps ensure parts move correctly without colliding, which is essential for maintaining motorcycles and generators used for transport and small businesses.
Jinsi utakavyotathminiwaTathmini ya mchakato
Tathmini ya mchakato
Procedures for performing locus of various mechanisms are described and applied as instructed.
Swali
What is a locus in technical drawing?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado