Mada za sehemu hiiHandling fire accidentsMada 2
- Handling firefighting equipment and materials
- Handling different types of fires
A fire in a weaving workshop spreads fast because yarn, cloth, and wooden looms all burn easily. Dealing with a fire quickly and correctly protects lives, looms, and finished cloth, so every weaver must know the firefighting equipment and materials in the workshop, which kind of fire each one is for, and how to handle and look after them.
Fires are grouped into classes according to what is burning:
| Class | What is burning | Examples |
|---|---|---|
| A | Solid materials | Wood, paper, yarn, cloth |
| B | Flammable liquids | Petrol, kerosene, oil, paint |
| C | Flammable gases | Cooking gas |
| D | Metals | Magnesium, aluminium powder |
| Electrical (often called Class E) | Live electrical equipment | Wiring, switches, motors |
| F | Cooking oils and fats | Deep-frying oil |
In a weaving workshop, Class A fires are the most likely, followed by electrical fires.
Different fires need different types of extinguishers. Using the wrong one can make the fire worse or be dangerous.
1. Water Extinguisher (Class A)
- Use for: Ordinary combustibles like wood, cloth, paper, and plastics
- How it works: Cools the fire below its burning temperature
- Colour code: Red
- Never use on: Burning liquids or live electrical equipment
2. Dry Chemical Powder Extinguisher (Classes A, B, and C)
- Use for: Flammable liquids like petrol, kerosene, oil, and paints; also burning solids, burning gases, and fires in electrical equipment
- How it works: Smothers the fire and stops the chemical reaction
- Colour code: Blue label
3. Carbon Dioxide (CO₂) Extinguisher (Electrical and Class B)
- Use for: Electrical fires involving wires and appliances, and small fires of flammable liquids
- How it works: Displaces oxygen and cools the fire
- Colour code: Black label
- Take care: Do not hold the horn (the wide nozzle) while using it, because it becomes cold enough to injure your hand
4. Foam Extinguisher (Classes A and B)
- Use for: Liquids that float on water like petrol and diesel, and burning solids like wood and cloth
- How it works: Forms a blanket of foam that stops burning vapours
- Colour code: Cream label
- Never use on: Live electrical equipment
Fire Blankets
- Made from material that does not burn easily, such as glass fibre
- Used to smother small fires or wrap around a person whose clothes are on fire
- After it has been used on a fire, replace it with a new one
Sand and Water Buckets
- Sand stops oxygen from reaching the fire
- Water cools the fire down; use it only on burning solids such as wood, yarn, and cloth, never on burning liquids or electrical equipment
- Always kept near the workshop entrance
Fire Beaters
- A flat pad of rubber or thick canvas on a long handle
- Used to beat out small fires in open areas
- Effective on grass fires around the workshop buildings
Follow these four steps:
- P – Pull the safety pin from the handle
- A – Aim the nozzle at the base of the fire
- S – Squeeze the handle to release the extinguishing agent
- S – Sweep the nozzle from side to side while aiming at the base
Worked Example
Imagine a kerosene lamp falls over in your workshop and starts a fire on the floor. The correct steps are:
- Do not use water (it will spread the burning kerosene)
- Use a dry chemical powder extinguisher or sand to smother the fire
- Pull the pin, aim at the base, squeeze the handle, and sweep across the flames
Wear this protective gear when you practise with firefighting equipment and when you check or clean it (in a real fire, do not waste time looking for gear; raise the alarm first):
- Safety gloves – protect hands from heat and chemicals
- Safety boots – protect feet from falling objects and hot materials
- Overall or apron – protects your body and clothes
- Safety glasses – protect eyes from powder and flying particles
- Always sound the alarm first before trying to fight a fire
- Only fight a fire if it is small and you have a clear escape route
- If the fire keeps growing or the extinguisher runs empty, leave at once, close the door behind you, and wait for the fire brigade
- Stand at a safe distance – about 2 to 3 metres from the fire
- Never turn your back on a fire – always face it while retreating
- After putting out a fire, check that it is completely out and cannot reignite
An extinguisher that is not looked after may fail when it is needed most. Check every extinguisher regularly, for example once a month, so that it is ready before a fire starts. Check that:
- The service date on the label has not passed
- The pressure gauge is in the green zone
- The safety pin is in place
- There is no visible damage or rust
- The hose and nozzle are not cracked or blocked
- It is in its proper place, easy to see and easy to reach
A trained technician should service every extinguisher at least once a year. An extinguisher that has been used, even for a few seconds, must be refilled before it goes back in its place. Report any fault to the person in charge of the workshop at once.
After a fire or a practice, wait until the area is cool and safe, then:
- Sweep up used powder, sand, and ash while wearing gloves and safety glasses, and mop up water or foam so that nobody slips
- Soak burnt yarn, cloth, or paper with water until it is completely cold, then put it in a metal waste bin outside the workshop; never mix warm ashes with dry waste
- Send used extinguishers for refilling and refill the sand and water buckets
- Clean the safety gear and return it to its cupboard
- Keep each kind of equipment in its own marked place: extinguishers hung on wall brackets near the exits, fire blankets in their cases, and buckets by the entrance
- Never let looms, yarn, or boxes block the way to firefighting equipment
In Tanzania, many homes and workshops use kerosene stoves and charcoal jikos, which can cause fires if not properly managed. Understanding how to use a sand bucket or fire extinguisher can save a family's shop from burning down — for example, a small fire in a market stall can be stopped quickly with the correct equipment before it destroys everything.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should explain how to:
- Select tools, equipment, and safety gear
- Observe safety precaution
- Identify the types of fires
- Identify the types of fire-extinguishing materials
- Clean up tools, equipment, and workplace
- Store tools according to their types
Tathmini ya matokeo
Firefighting equipment and materials are properly handled
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to handle firefighting materials
Principles: The student should explain the principles of handling firefighting equipment and materials
Theories: The student should explain:
- The importance of handling fire accidents
- Types and common classes of fires
- Handle different types of fires
- Importance of checking and servicing fire extinguishers
Circumstantial knowledge:
Detailed knowledge of:
- Safety precautions while handling fire accidents
- Safe handling of tools and equipment
- Waste disposal
Swali
What does the letter A stand for in the PASS method of using a fire extinguisher?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado