Mada za sehemu hiiHandling fire accidentsMada 2
- Handling firefighting equipment and materials
- Handling different types of fires
A fire in the workshop can start suddenly and spread quickly, so every weaver must know how to identify the type of fire and choose the right way to put it out. Using the wrong method can make the fire worse or cause injury.
Fires are grouped into classes according to the material that is burning. Knowing the class helps you select the correct fire extinguisher or method.
| Class | Type of Fire | Common Materials |
|---|---|---|
| A | Ordinary combustibles | Wood, paper, cotton fabric, textiles |
| B | Flammable liquids | Oil, petrol, varnish, dye solvents |
| C | Flammable gases | Cooking gas in cylinders |
| D | Combustible metals | Magnesium, aluminium shavings |
| Electrical (often called Class E) | Live electrical equipment | Electric motors, switches, wiring |
| F | Cooking oils and fats | Deep-frying oils (more common in kitchens) |
In a handloom weaving workshop, the most likely fires are Class A (cotton, silk, wool yarns, wooden frames) and electrical fires (wiring, lights, sockets, and electric winding machines).
Class A Fires — Ordinary Combustibles
- Remove the source of heat or fuel if it is safe to do so.
- Use water or a water-based fire extinguisher to cool the burning material below its ignition temperature.
- Smother a small fire with a fire blanket, sand, or dry chemical powder.
Example: A pile of cotton yarn catches fire from a spark. The weaver shouts "Fire!", takes the nearest water fire extinguisher, pulls out the safety pin, aims at the base of the flames, and squeezes the handle while sweeping from side to side until the fire is out.
Class B Fires — Flammable Liquids
- Never use water — burning oil, petrol, or solvent floats on water, so the fire spreads.
- Cut off the oxygen supply by covering with a fire blanket or sand.
- Use a foam, powder, or carbon dioxide (CO₂) fire extinguisher.
Electrical Fires
- Switch off the electricity at the mains immediately if it is safe.
- Do not spray water or water-based extinguishers on live electrical equipment — water conducts electricity and can cause electric shock.
- Use a CO₂ or dry powder fire extinguisher designed for electrical fires.
Other Classes of Fire
Gas, metal, and cooking-oil fires are unlikely in a weaving workshop. For a gas fire, turn off the gas at the cylinder if it is safe and use a dry powder extinguisher; if you cannot turn the gas off, leave the building and call the fire brigade. Burning metal needs a special powder, and burning cooking oil needs a fire blanket or a wet chemical extinguisher. Never use water on burning metal or burning oil.
General Steps for Fighting Any Fire
- Alert everyone nearby by shouting "Fire!" or sounding the alarm.
- Call the fire brigade (dial 114 in Tanzania) for any fire that is not put out at once.
- Evacuate the area using the nearest safe exit — never let the fire come between you and the exit.
- Fight the fire only if it is small and you have the correct extinguisher; otherwise, leave it to the professionals.
- Stay low to avoid inhaling smoke.
The workshop must have the following ready at all times:
- Fire extinguisher (appropriate type for the fire class)
- Fire blanket (for smothering small fires)
- Sand bucket (for Class A and B fires)
- First aid kit (for treating burns)
- Safety gear — gloves, safety shoes/boots, overall or apron, and safety glasses
Always check that fire extinguishers are within their expiration date and that the pressure gauge shows green before beginning work.
- Keep flammable materials (solvents, dye thinners) in labelled, closed containers away from heat sources.
- Store yarn and fabric stacks at a safe distance from electrical panels.
- Never block fire exits or escape routes.
- Know the location of every fire extinguisher in the workshop.
- If your clothes catch fire, stop, drop to the ground, and roll to smother the flames.
- Cool a small burn under clean running water for about 20 minutes and report it; do not put oil, butter, or toothpaste on a burn.
- Do not go back in until the person in charge says the area is safe and cool.
- Open doors and windows to clear the smoke.
- Wearing gloves, sweep up powder, sand, and ash, and mop up water or foam so that nobody slips.
- Soak burnt yarn, cloth, and wood with water until they are completely cold, then put them in a metal waste bin outside; never mix warm ashes with dry waste.
- Send every used extinguisher for refilling, even if it was used for only a few seconds, and refill the sand bucket.
- Clean the safety gear and tools and return each item to its marked place: extinguishers on their wall brackets near the exits, the fire blanket in its case, and the first aid kit in its cupboard.
At home in Tanzania, a charcoal stove or jiko left unattended can cause a Class A fire in the kitchen, especially if it ignites wooden shelves or cloth items stored nearby. Knowing the difference between a water-safe fire and a flammable-liquid fire helps you choose the right action — for example, never throwing water on a burning petrol spill, which would spread the fire dangerously. Practising fire safety in the workshop builds the same habits that protect your family and community at home.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should explain how to:
- Select tools and equipment
- Observe safety precautions
- Identify common classes of fire
- Clean up tools, equipment, and workplace
- Store tools according to their types
Tathmini ya matokeo
Different types of fires are properly handled
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to: Handle different types of fires
Principles: The student should explain the principles of handling different types of fires
Theories: The student should explain:
- The importance of handling fire accidents
- Types and common classes of fire
- Different types of firefighting materials
Circumstantial knowledge:
Detailed knowledge of:
- Safety precautions while handling fire accidents
- Safe handling of tools and equipment
- Waste disposal
Swali
In a handloom weaving workshop, a fire involving cotton yarn and wooden frames is classified as which class of fire?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado