Mada za sehemu hiiHandling accidents and incidentsMada 5
- Handling mechanical hazards
- Handling physical hazards
- Handling chemical hazards
- Handling electrical hazards
- Handling ergonomic hazards
Mechanical Hazards in the Workshop
Mechanical hazards are dangers caused by using machines. They can lead to serious injuries or even death if not controlled properly. In masonry and bricklaying workshops, understanding and handling mechanical hazards is essential for your safety and the safety of others.
A hazard is any source of damage, harm, or adverse health effects to people or equipment under certain conditions at work. Mechanical hazards are types of dangers caused by machinery use. They can be present in various workplaces, including factories, construction sites, and offices.
Examples of Mechanical Hazards
- Moving parts – parts of a machine that move, such as gears, belts, and pulleys, can catch hands or clothing
- Sharp edges – machine parts like blades or saws can cause cuts and lacerations
- Crushing hazards – machines can have parts that move together and crush or press against someone
- Falling objects – machines can cause tools or debris to fall and hit someone
- Explosion or fire – some machines use flammable materials or produce sparks
Simple Machine
A simple machine is a device that has few or no moving parts and makes work easier. Examples include:
- Lever
- Pulley
- Wedge
- Screw
- Wheel and axle
- Inclined plane
Complex Machine
A complex machine is a device that consists of two or more simple machines working together. Examples include:
- Bicycles
- Cranes
- Car jacks
- Lawnmowers
Machines make work easier and more efficient, but they can also be dangerous. Always handle and use machines with care.
- Moving or revolving parts in a machine
- Unguarded cutters in a machine
- Flying or falling objects such as chips and finished workpieces
- Bare electrical wires
- Welding chips and fumes
- Machine or containers leaking oil onto the floor
- Unsecured machine
- Extreme temperature from furnaces or ovens
- Vibrations from machines
- Excessive noise
- Dust and gases from different machines
- Cuts – caused by touching dangerous unguarded cutters or moving parts
- Electrical shock – direct contact with bare electrical wires may lead to injury or death
- Eye problems – watching welding work without eye protection can lead to impaired vision or blindness
- Moving parts catching hands or clothes – rotating parts could catch an operator's hand or clothes and cause fractures
The following machine parts are particularly dangerous:
- Shafts
- Wheels
- Rollers
- Pulleys
- Saw blades
- Drill bits
- Bolts
- Lathe chucks
- Chains
How Moving Parts Cause Harm
- Placing unprotected hands near dangerous moving cutters
- Working or watching with unprotected eyes when operating the lathe machine or when doing welding work
- Placing fingers between machine parts, gears, rollers, or pulleys
- Touching bare wires with bare hands
- Loose clothes caught by machine belts or gears
Always follow these safety precautions:
- Before starting a machine, make sure that the moving parts are guarded
- Stop the machine before making any adjustments or maintenance
- Stand in a safe position around the machine
- Wear protective safety gear
- One machine should be operated by one person
- Rags, cotton waste, or loose garments should never be allowed near rotating machinery
- Allow only trained and competent trainees or employees to operate machines
- Put up warning signs to warn employees of machine hazards
- Ensure all machines are properly guarded
- Educate employees or trainees on all machine hazards, relevant control measures, and safe work procedures
- Provide employees with the correct PPE
- Separate the worker and the hazard
- Guard the dangerous zones using different machine guards
Unintentional starting is among the causes of mechanical hazards. These can be minimized by:
- Using a lockable switch which ensures that an unauthorized person does not start the machine
- Covering the starting device so that one cannot reach the starting device unless it is open
- Placing the starting device in such a way that it makes it impossible to start the machine accidentally
Gangways are spaces provided in workshops between one machine and another. These ways allow operation, adjustment, inspection, and lubrication without danger and in the most comfortable way possible.
Importance of Access and Gangways
- They allow workers to reach narrow spaces comfortably
- They allow safe movement in the workplace
- They allow lubrication, inspection, and adjustment to be carried out without danger
- They limit free access to danger points or zones
- They encourage good housekeeping
In Tanzania, bricklayers and masons often work with machines like brick saws, concrete mixers, and grinders. For example, when using a concrete mixer at a construction site in Dar es Salaam, a mason must ensure the machine is properly guarded, wear safety boots and gloves, and make sure only trained workers operate it. This prevents accidents like caught fingers or electrical shocks, ensuring safe construction work.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Carry out first aid to persons involved in accidents related to mechanical hazards
- Use service manual
- Interpret workshop rules and regulations
- React correctly and safely when faced with an emergency
- Identify and apply all emergency equipment and supplies
- Locate first aid kit
- Take the necessary steps to save the victim
- Report to superiors
- Record accidents
- Make periodic inspections of the workshop area and equipment
- Identify hazard material
- Handle hazard material
- Use colour code and know what colour represent
- Handle mechanical
Tathmini ya matokeo
Mechanical hazards are handled according to workshop rules and regulations
Tathmini ya maarifa
Detailed knowledge of:
Method used: The student should explain how to handle mechanical hazards
Principles: The student should explain the principles of handling mechanical hazards
Theories: The student should explain:-
- Effects of mechanical hazards
- Emergency life support
- Treatment for fractures
- Treatment for an unconscious person
- Importance of using safety gears
- Advantages of accident prevention
- Usage of colour code and safety signs
Detailed knowledge about:
- Safety precautions while handling accidents and incidents
- Safe handling of tools, equipment and machines
Swali
Which of the following is an example of a mechanical hazard in a masonry workshop?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado