Mada za sehemu hiiHandling accidents and incidentsMada 5
- Handling mechanical hazards
- Handling physical hazards
- Handling chemical hazards
- Handling electrical hazards
- Handling ergonomic hazards
Handling Ergonomic Hazards
Ergonomic hazards in masonry and bricklaying involve risks associated with the physical strain and repetitive motions required in these trades. These hazards can lead to musculoskeletal disorders and injuries if not addressed. Proper ergonomic practices are essential for maintaining the health and well-being of workers in these professions.
Ergonomics is simply the art of designing jobs such that they fit the workers, as opposed to the prevalent tendency of forcing the worker to fit the job.
When workers are forced to work in uncomfortable positions, their muscles become strained, reducing comfort and diminishing concentration. This can potentially lead to occasional illness during work. Sickness or poor focus can increase the likelihood of accidents.
The following are the main causes of ergonomic hazards in the workplace:
- Heavy physical loads or use of force — lifting or pushing heavy materials like bags of cement
- Repetitive tasks — performing the same motion many times, such as laying bricks repeatedly
- Awkward postures — working with the back bent, arms overhead, or in twisted positions
- Poorly designed tools and work practices — using tools that do not fit the worker's hand or body
- Continuous sitting or standing — maintaining the same position for long periods
The importance of addressing workplace ergonomics is to prevent bad design from being built into a job when a job, tools, or workstations are being set up. Ergonomics can be used to improve poor working conditions and prevent cumulative trauma disorders (CTDs). These disorders usually affect soft tissues, muscles, wrists, joints, the back, or other parts of the body.
The following injuries can result from poor ergonomic practices:
- Excessive use of vibrating tools and equipment
- Tools and tasks that require twisting hand or joint movements
- Lifting or pushing heavy loads with a bent back
- Working with arms extended or overhead
- Working in awkward postures
Static Work Ergonomics
Static work in industry often gets ignored. It might seem like it does not need much muscle effort because there is not much outward movement. However, when compared to tasks with some outward movement, static work can make muscles more tired. Keeping any group of muscles rigid and unsupported for a long time leads to muscle strain.
Static work reduces blood supply to the muscles, which can cause a shortage of oxygen in that area, and waste products build up. In masonry, static work includes holding bricks in place, preparing mortar, or maintaining specific postures during construction.
Health impacts of static work ergonomics:
- Back pains caused by poor chair or workbench design
- Muscle strain of the legs caused by suspended legs during work
Solutions:
- Use chairs and tables with adjustable heights and reach
- Switch between static and dynamic work
- Use armrests and padded seats
Dynamic Work Ergonomics
Dynamic work ergonomics is work that requires a worker to move from one point to another most of the time. Examples in masonry and bricklaying include bricklaying, pipe laying, moving construction materials to a site, and carrying heavy loads.
Health impacts of dynamic work ergonomics:
- Muscle strain and pain in the joints
- Instant and severe injuries such as stumbling and falling while carrying heavy loads
- Being crushed by reversing vehicles or knocked down by crane loads
Improper lifting causes many accidents in masonry workshops. Heavy objects like bags of cement, if not lifted carefully, can cause damage to one's back. The following are safe lifting principles:
-
The lifting of heavy loads should involve more than one person. The participants should have approximately the same weight and height and must be synchronized so that they lift at the same time and speed.
-
Avoid lifting and carrying heavy objects of large diameters because the centre of gravity is far away from the body.
-
Think before handling or lifting. Plan the lift. Where is the load going to be placed? Use suitable handling aids where possible. Will you need help with the load? Remove obstructions.
-
Adopt a stable position. Your feet should be apart with one leg in front of the other to increase stability. Be prepared to move your feet during the lift to keep a stable posture.
-
Keep the load close to your waist for as long as possible while lifting. Keep the heaviest side of the load next to your body.
-
Ensure a good hold on the load. Where possible, hug the load as close as possible to your body.
-
Slight bending of your back. Hips and knees at the start of the lift is preferable to either fully flexing your back (stooping) or fully flexing your hips and knees (full deep squatting).
-
Don't flex your back any further while lifting. This can happen if your legs begin to straighten before you start to raise the load.
-
Avoid twisting your back or leaning sideways, especially while your back is bent. Keep your shoulders level and facing in the same direction as your hips.
-
Keep your head up when handling. Look ahead, not down at the load once it is held securely.
-
Move smoothly. Do not jerk or snatch the load as this can make it harder to keep control.
-
Don't lift or handle more than you can easily manage. There is a difference between what people can lift and what they can safely lift. If in doubt, seek advice or get help.
-
Put down, then adjust. If you need to precisely position the load, put it down first, then slide it into the desired position.
Dynamic work ergonomics can be controlled by:
- Providing relevant training to workers
- Introducing a safe system of work at the workplace
The following principles should be followed to maintain good ergonomic practices:
- Maintain the natural "S-curve" of the back whether sitting or standing
- Keep the neck aligned — make changes to adjust equipment so that your neck is in its neutral posture
- Keep elbows at the sides — the neutral posture for your arms is to keep your elbows at your sides and your shoulders relaxed
- Reduce excessive force on your joints, which can create potential for fatigue and injury
- Keep everything easy to reach
- Work at a proper height — most work should be done at about elbow height
- Reduce excessive motions — the number of motions you make should be minimal
- Minimize fatigue and static load — holding the same position for some time is known as static work
- Minimize pressure points — avoid squeezing hard into tools
- Provide clearance — work areas need sufficient room for your head, knees, and feet
- Move, exercise, and stretch — the human body needs to be exercised and stretched
In Tanzania, a mason working on a construction site in Dar es Salaam or Arusha regularly lifts heavy bags of cement (each weighing 50 kg) and carries blocks. By applying proper lifting techniques—such as bending the knees, keeping the load close to the body, and using team lifting for very heavy loads—the mason can prevent back injuries that could otherwise force him to stop working and spend money on medical treatment, which is especially costly for a small-scale builder earning a daily wage.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Carry out first aid to persons involved in accidents related to ergonomic hazards
- Interpret workshop rules and regulations
- React correctly and safely when faced with an emergency
- Identify and apply all emergency equipment and supplies
- Locate first aid kit
- Take the necessary steps to save the victim
- Report to superiors
- Record accidents
- Make periodic inspections of the workshop area and equipment
- Use colour code and know what colour represent
- Handle ergonomic hazards
Tathmini ya matokeo
Ergonomic hazards are handled according to workshop rules and regulations
Tathmini ya maarifa
Detailed knowledge of:
Method used: The student should be able to explain how to handle ergonomic hazards
Principles: The student should explain the principles of handling ergonomic hazards:
Theories: The student should explain:-
- Effects of ergonomic hazards
- Emergency life support
- Treatment for fractures
- Treatment for an unconscious person
- Importance of using safety gears
- Advantages of accident prevention
- Usage of colour code and safety signs
Detailed knowledge about:
- Safety precautions while handling accidents and incidents
- Safe handling of tools, equipment and machines
- Waste disposal methods
Swali
What is the main purpose of ergonomics in the workplace?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado