Mada za sehemu hiiHandling fire accidentsMada 2
- Handling firefighting equipment and materials
- Handling different types of fire
Firefighting equipment and materials are essential tools used to extinguish fires and protect workers from fire hazards in the workshop. Understanding how to identify, use, and maintain these tools is crucial for every masonry and bricklaying student to ensure safety during construction activities.
Firefighting equipment refers to the collection of tools and gear used to extinguish fires or protect the user from fire. The table below shows common firefighting equipment, their descriptions, and purposes:
| Equipment | Description | Purpose |
|---|---|---|
| Fire Hoses | Flexible tubes designed to carry water or extinguishing agents | Direct water or chemicals onto flames |
| Fire Extinguishers | Portable devices containing substances that extinguish small fires | Quick response to prevent fire spreading |
| Fire-Resistant Clothing | Specialized attire to shield from heat and flames | Minimizes exposure to extreme temperatures |
| Gloves | Heat-resistant gloves protecting hands from burns | Handle hot surfaces safely |
| Respirators | Masks providing clean air in smoky environments | Prevent inhalation of harmful substances |
| Fire Nozzles | Attachments controlling water or foam direction and flow | Adjust spray pattern for different scenarios |
| Fire Pumps | Mechanical devices propelling water to firefighting equipment | Ensure continuous water supply |
| Fire Hose Reels | Winding devices for storing and dispensing hoses | Convenient hose deployment during emergencies |
Fire can be extinguished using different methods:
- Cooling the burning material to reduce temperature below ignition point
- Blanketing the fire with an inert gas that chokes it from oxygen
- Introducing materials that inhibit combustion
- Covering the burning matter with solid particles like sand to prevent air access
Different classes of fire require different types of extinguishers:
Water Extinguisher
- Class A fires (ordinary combustibles: wood, paper, cloth, plastics)
- Contains pressurized water that cools the fire
- Not suitable for flammable liquids, electrical equipment, or cooking oils
Foam Extinguisher
- Class A and B fires (flammable liquids: gasoline, oil, grease, paint)
- Foam blankets the fuel surface, separating it from oxygen
- Prevents re-ignition of flammable liquid fires
Chemical (Dry Powder) Extinguisher
- Class A, B, and C fires depending on powder type
- Works by interrupting the chemical reaction of the fire
- Common powders: monoammonium phosphate, sodium bicarbonate
Carbon Dioxide (CO₂) Extinguisher
- Class B and C fires (flammable liquids or electrical equipment)
- CO₂ displaces oxygen, suffocating the fire
- Does not leave residue; safe for sensitive electrical equipment
Dry Chemical Extinguisher
- Similar to chemical extinguishers
- Effective on Class A, B, and C fires
- Commonly found in commercial and residential settings
Vaporizing Liquid (Wet Chemical) Extinguisher
- Class K fires (cooking oils, greases, fats)
- Reacts with hot cooking oil to form soapy foam
- Cools the fire and prevents re-ignition
Understanding the parts of a fire extinguisher helps in proper operation:
Storage Components
- Cylindrical tank: Stores extinguishing agent and propellant under pressure
Expelling Components (Valve Assembly)
- Valve: Controls flow of the agent
- Carry handle: Allows grasping and carrying
- Operating lever: Pressed/squeezed to discharge
- Pull pin: Prevents accidental discharge
- Tamper seal: Keeps pull pin in place
- Pressure gauge: Shows if properly charged (needle in green zone)
- Discharge hose: Carries agent from tank to fire
- Discharge nozzle: conical end where agent disperses
Informative Components
- Instruction label: Provides usage instructions
- Monthly inspection tag: Records monthly checks
- Annual inspection tag: Records annual maintenance
Remember the acronym PASS for proper extinguisher use:
- PULL the pin – allows operation of the extinguisher
- AIM at the base of the fire – where the fuel is located
- SQUEEZE the handle – while standing approximately 8 feet away
- SWEEP from side to side – until the fire is completely extinguished
Important: Always keep your back facing the exit. If the fire re-ignites or spreads, evacuate immediately.
Follow these safety rules when discovering a fire:
- Assist any person in immediate danger
- Call the security controller
- Raise the alarm
- Ensure all people are aware of the emergency
Only then, if the fire is small, use an extinguisher.
Never Attempt to Fight Fire If:
- You don't know what is burning
- The fire has started to spread rapidly
- You don't have adequate or appropriate equipment
- You don't have the correct type or large enough extinguisher
- The smoke is too thick – inhaling toxic smoke can be fatal
Fire signage indicates the location of fire exits, equipment, and alarms. Four main types:
- Fire action notice: Explains what to do in case of fire
- Fire equipment: Shows where firefighting equipment is located
- Fire exit and door: Marks route to emergency exits
- Warning and prohibition: Alerts people to danger
Regular maintenance ensures extinguishers work when needed:
Basic Service (Annually)
- Check weight and pressure
- Inspect for damage or corrosion
- Check labels for legibility
- Inspect hoses and mechanisms
Extended Service (Every 5 Years)
Water, foam, and powder extinguishers require test discharge and recharging with fresh agent.
Overhaul (Every 10 Years)
CO₂ extinguishers require hydraulic pressure testing, internal inspection, and new valve fitting.
In Tanzania, bricklayers working on construction sites in Dar es Salaam, Arusha, or Dodoma must know where fire extinguishers are stored and how to use them, especially when using fuel-powered brick saws or storing flammable solvents. For example, if a cement bag storage area catches fire due to spontaneous combustion of oil-soaked rags, a trained mason can quickly use the correct foam extinguisher to control the fire before the local fire brigade arrives, protecting tools, materials, and fellow workers.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select tools, equipment and safety gears
- Identify common classes of fire
- Use first aid kit
- React correctly and safely when faced with different types of fire
- Check and test fire extinguishers
- Clean up tools, equipment and working place
- Store tools, equipment
Tathmini ya matokeo
Firefighting equipment and materials are handled as per rules and regulations
Tathmini ya maarifa
Detailed knowledge of:
Method used: The student should be able to explain how to handle firefighting equipment and materials
Principles: The student should explain the principles of handling firefighting equipment and materials
Theories: The student should explain:-
- Importance of checking and servicing fire extinguishers
- Importance of differentiated firefighting materials
Swali
Which fire extinguisher is suitable for extinguishing Class C fires involving electrical equipment?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado