Mada za sehemu hiiHandling fire accidentsMada 2
- Handling firefighting equipment and materials
- Handling different types of fire
Handling Different Types of Fire
Fire is a serious hazard in any workshop, including masonry and bricklaying workplaces. Understanding how fires start, the different types of fires, and how to handle them is essential for your safety and the safety of those around you. This knowledge helps prevent accidents and protects equipment, materials, and lives.
Fire is a chemical reaction that occurs when a fuel source (such as wood, gasoline, or paper) combines with oxygen in the air, releasing heat, light, and reaction products. At a certain point in the combustion reaction, called the ignition point, flames are produced. The flame is the visible portion of the fire.
The Fire Triangle
Three elements must be present for fire to exist:
- Fuel – any material that can burn (wood, paper, gasoline, etc.)
- Oxygen – the air we breathe
- Heat – a source of heat high enough to start the reaction
These three elements form the fire triangle. If any one of these three sides is removed, fire ceases to exist.
Combustion is a chemical reaction that forms oxide of the burning materials, accompanied by the evolution of heat and light. There are three important temperature points in combustion:
1. Flash Point
The flash point is the lowest temperature at which a substance's burning vapours produce a momentary flash when a small flame is applied. At this temperature, the vapour ignites briefly but may not continue burning.
2. Fire Point
The fire point is the lowest temperature at which the heat of combustion produces sufficient vapours to enable combustion to continue after the flame is removed. This temperature is higher than the flash point.
3. Ignition Point
The ignition point is the lowest temperature at which an active combination of the substance with oxygen in the air takes place. This is the temperature at which the substance will spontaneously ignite.
Why does this matter? Knowing these temperature points helps us understand why certain materials catch fire more easily than others. For example, petrol has a lower flash point than wood, meaning it ignites at lower temperatures.
Fires in workshops and workplaces can start from many sources. The main causes include:
1. Careless Smoking or Matches
Disposing of burning cigarettes in the workshop or smoking near flammable substances can cause fire.
2. Sparks from Machinery
Sparks may be caused by friction between metal parts, misalignment, or breakage. These sparks can ignite combustible materials nearby.
3. Welding Operations
The flame from welding equipment may come into contact with combustible material. Never permit welding in hazardous locations.
4. Static Electric Spark
In industries like textile and rubber, static charge produced during operations is a common cause of fire.
5. Electrical Causes
Defective electric circuits, loose contacts, or damaged wiring can produce sparks that ignite flammable vapours.
6. Chemical Reactions
When two reacting chemicals come into contact accidentally, fire may break out. For example, when potassium permanganate and glycerine come together, fire starts immediately.
7. Rubbish and Litter
Accumulation of discarded materials creates conditions that may result in fire.
8. Molten Metals
Hazard develops from spraying, dripping, or splashing of molten metals.
9. Spontaneous Combustion
Oil-soaked rags, cotton waste, and certain chemicals can spontaneously combust over time.
Fires are classified into different classes based on the type of material that is burning. Each class requires a different method of extinguishing.
| Class | Type of Material | Examples | Suitable Extinguisher |
|---|---|---|---|
| Class A | Ordinary combustibles | Wood, paper, cloth, plastics | Water, sand, foam |
| Class B | Flammable liquids | Gasoline, oil, paint, grease | Foam, CO₂, dry powder |
| Class C | Electrical equipment | Electrical appliances, wiring | CO₂, dry powder |
| Class D | Combustible metals | Magnesium, titanium, potassium | Special metal agents |
| Class F (or K) | Cooking appliances | Vegetable oils, animal fats | Wet chemical (K) |
Worked Example
Scenario: A masonry workshop has a fire in a pile of wooden formwork (Class A), and nearby there is a bucket of gasoline used for cleaning tools (Class B).
What to do:
- For the wooden formwork fire: Use a water extinguisher or sand to cool the burning material and remove the heat element.
- For the gasoline fire: Use a foam extinguisher to blanket the fuel surface and separate it from oxygen. Never use water on flammable liquid fires as it will spread the fire.
Combustible Materials
Masonry workshops often involve wood for formwork and other combustible materials. Class A fire precautions are essential. Always store wood materials away from heat sources.
Flammable Liquids
Bricklaying may involve the use of flammable solvents for cleaning tools. Awareness of Class B fire hazards is crucial. Keep these liquids in proper containers and store them in designated areas away from ignition sources.
Electrical Equipment
Brick saws, mixers, and other electrical tools are commonly used. Understanding Class C fire risks is vital. Always check electrical cords for damage before use and use non-conductive extinguishing methods (CO₂ or dry powder extinguishers) if electrical fires occur.
To prevent fire accidents, always follow these rules:
- Keep the workshop clean and free from rubbish
- Store flammable liquids in proper containers
- Check electrical equipment regularly for faults
- Never smoke near flammable materials
- Know the location of fire extinguishers
- Report any electrical or fire hazards immediately
- Keep exits clear at all times
- Fire requires fuel, oxygen, and heat (the fire triangle)
- Understanding flash point, fire point, and ignition point helps prevent fires
- Know the five classes of fire: A, B, C, D, and F
- Use the correct extinguisher for each class of fire
- In masonry workshops, be aware of combustible materials, flammable liquids, and electrical equipment
- Follow all fire safety rules and report hazards immediately
In Tanzania, masonry workshops and construction sites commonly use petrol-powered generators and mixers. If a fire starts in such a workshop, a student trained in handling different types of fire can quickly identify whether it is a Class A (wood/formwork), Class B (petrol/sp solvents), or Class C (electrical) fire and use the appropriate extinguisher. For example, if petrol spills and ignites near an electrical saw, the student would use a CO₂ extinguisher (Class C) rather than water, preventing the spread of fire and potential injury to workers at the site.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select tools, equipment and safety gears
- Identify common classes of fire
- Use first aid kit
- React correctly and safely when faced with different types of fire
- Apply right class of fire extinguisher
- Handle different types of fire
- Apply right class of firefighting materials
- Check and test fire extinguishers
- Clean up tools, equipment and working place
- Store tools, equipment and safety gears
Tathmini ya matokeo
Different types of fire are handled as per rules and regulations
Tathmini ya maarifa
Detailed knowledge of:
Method used: The student should explain how to handle different types of fire:
Principles: The student should explain the principles of handling different types of fire:
Theories: The student should explain:-
- Importance of handling fire accidents
- Types and common classes of fire
- Handle different types of fire
- Importance of checking and servicing fire extinguishers
- Importance of differentiated firefighting materials
Detailed knowledge about:
- Safety precautions while handling fire accidents
- Safe handling of tools and equipment
- Waste disposal methods
Swali
What are the three elements that must be present for fire to exist, according to the fire triangle?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado