Mada za sehemu hiiPreparing weft pick for fabric weavingMada 4
- Performing winding to a pirn
- Performing winding to a stick shuttle
- Fitting wound pirns or bobbins to a boat shuttle
- Fitting the boat shuttle in the shuttle box
Winding to a stick shuttle is the process of wrapping weft yarn around a simple wooden shuttle tool in preparation for weaving. This creates a convenient source of weft yarn that can be easily passed back and forth across the warp threads during weaving.
A stick shuttle is a flat, narrow piece of wood with notches on each end. It is the simplest type of weaving shuttle. Unlike boat shuttles, it does not glide across the warp on a shuttle race. Instead, the weaver passes it from the right hand to the left hand and back again.
Stick shuttles are commonly used in the following situations:
- On table looms with narrow sheds
- On rigid heddle looms, tapestry looms, and small frame looms
- For weaving very narrow fabrics or bands
- For sampling (testing a few picks of a colour or pattern)
- For carrying a supplementary weft over a short distance
- As a pickup stick for creating more complex patterns
The stick shuttle should be slightly longer than the width of your weaving project for best results.
Before starting, gather these tools:
- Stick shuttle – the wooden shuttle itself
- Scissors – for cutting the yarn when finished
- Weft yarn – the yarn you will wind onto the shuttle
Step 1: Start with a Figure-8
Begin by making a figure-8 shape with your yarn around just one side of the stick shuttle. Wrap the yarn around one end, cross it over, and wrap around the other end. This creates a secure starting point.
Step 2: Continue Winding on the First Side
Repeat the figure-8 pattern on the same side of the shuttle. Continue wrapping until that side of the shuttle is full. Make sure each layer sits neatly beside the previous one.
Step 3: Move to the Second Side
Once the first side is full, turn to the empty side of the shuttle. Begin making figure-8 wraps on the other side of the shuttle.
Step 4: Fill the Second Side
Wind figure-8s on the second side until it is also full. Keep these two points in mind:
- Count your windings so you always wind the same amount of yarn on each shuttle
- Remember to also wind some yarn on the middle part of the shuttle
Step 5: Complete the Winding
Once the shuttle is full, stop the winding process. Use scissors to cut the yarn from the source. Your stick shuttle is now ready for weaving.
Note: If you are using a rigid heddle loom with a good shed, you can add more yarn by winding straight up and around the middle of the shuttle for extra capacity.
Imagine you are preparing to weave a small table runner on a table loom. You need to wind your blue weft yarn onto a stick shuttle.
- You take your stick shuttle and your blue weft yarn.
- You make a figure-8 around the left side of the shuttle – this anchors the yarn.
- You repeat the figure-8 motion twelve more times until the left side feels firm.
- You turn to the right side and make figure-8s there too, counting as you go.
- You also wind a few extra wraps around the middle section of the shuttle.
- You count that you have wound 25 figure-8s on each side, so your shuttle is balanced.
- You cut the yarn and your stick shuttle is ready for weaving the table runner.
- Always wind yarn evenly on both sides of the shuttle for balanced tension
- Keep the number of windings consistent between shuttles for uniform weaving
- Wind some yarn in the middle section of the shuttle for better capacity
- The stick shuttle is passed by hand, not slid across the warp
Preparing weft yarn on a stick shuttle allows weavers to:
- Have a convenient supply of weft yarn ready for weaving
- Control the amount of yarn used in each pass
- Work efficiently on narrow fabric projects
- Easily change colours by preparing multiple shuttles
In Tanzania, handloom weaving is practiced in many communities, including at cultural centres and small workshops in areas like Bagamoyo and Arusha. A student who learns to wind a stick shuttle can use this skill to prepare weft yarn for weaving kanga fabrics, table runners, or decorative wall hangings to sell at local markets or to friends, turning a traditional craft into a small income-generating activity.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should explain how to
- Select tools and equipment
- Observe safety precautions
- Select yarn packages for weft picks
- Wind yarn to a stick shuttle
- Observe safety precautions
- Clean tools and workplace
- Store tools and equipment
Tathmini ya matokeo
Winding to a stick shuttle is correctly done
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to: wind to a stick shuttle Principle: The student should explain the principles of: Winding to a stick shuttle
Theories: The student should explain:
- The Uses of Stick Shuttle
- weaving preparation
- The advantages of using the stick shuttle waving process
Circumstantial knowledge:
Detailed knowledge about:
- Proper handling of working tools
- Safety measures when handling working tools
Swali
What is the process of winding to a stick shuttle?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado