Mada za sehemu hiiPreparing weft pick for fabric weavingMada 4
- Performing winding to a pirn
- Performing winding to a stick shuttle
- Fitting wound pirns or bobbins to a boat shuttle
- Fitting the boat shuttle in the shuttle box
Fitting Wound Pirns to a Boat Shuttle
After winding yarn onto pirns, the next step is to fit those wound pirns into a boat shuttle. A boat shuttle is the tool that carries the weft yarn across the loom during weaving. This activity prepares the weft pick for fabric weaving by loading the wound pirn into the shuttle so the yarn can be delivered smoothly through the warp.
Pirn – A rod onto which weft thread is wound for use in weaving. Unlike a bobbin, it is fixed in the middle of the shuttle, and thread is delivered off the end of the pirn rather than from the centre.
Boat shuttle – The most common type of weaving shuttle for multi-shaft table and floor looms. It is shaped like a boat and has a metal rod running across its width where the pirn or bobbin slides.
Weft – The horizontal yarn that runs across the loom, interlacing with the vertical warp yarns to form fabric.
The boat shuttle serves important purposes in weaving:
- It allows the yarn to wind off quickly while weaving
- It provides more tension control than stick shuttles
- The controlled tension improves the selvedges (the edges of the fabric) and speeds up weaving
- It moves smoothly across the warp, carrying the weft yarn through the shed
- A wound pirn (filled with weft yarn)
- A boat shuttle
- A hook (optional, for guiding the yarn)
Follow these steps carefully:
Step 1: Dip the Pirn into the Shuttle
Take your wound pirn that has been filled with weft yarn during the winding process. Carefully insert the pirn into the boat shuttle by sliding it onto the metal rod that runs across the width of the shuttle. Make sure the pirn fits snugly and sits firmly in position.
Step 2: Thread the Weft Through the Groove
Once the pirn is secured in the shuttle, thread the weft yarn through the groove (the channel) of the boat shuttle. Pull about three inches of yarn off the pirn. Hold the thread with your finger against the pirn to create tension, then place the thread between the pads and follow the slit. This ensures the yarn will unwind smoothly when you throw the shuttle.
Step 3: Pull Out the Starting Weft
Pull out a few inches of weft yarn from the shuttle. This gives you the starting point of the weft yarn that will be woven first into the fabric. Having this length ready makes it easier to begin weaving and ensures the yarn is properly positioned to pass through the warp.
Imagine you have wound a pirn with blue weft yarn using the winding process. Now you need to prepare it for weaving a cloth:
- You slide the wound pirn onto the metal rod inside the boat shuttle
- You pull the blue yarn through the groove and hold it with finger tension
- You pull out about 5 cm of yarn to start weaving
Now your shuttle is ready to be thrown across the warp to create your woven fabric!
- The pirn must be firmly fixed in the shuttle so it does not move during weaving
- The yarn should unwind smoothly without tangling
- Always maintain proper tension when threading the yarn
- After fitting the pirn, the shuttle is ready to be placed in the shuttle box for weaving
Fitting wound pirns to a boat shuttle involves three main steps: inserting the pirn into the shuttle, threading the weft through the groove with proper tension, and pulling out the starting yarn. This process prepares the weft pick for fabric weaving and enables the shuttle to carry yarn across the loom efficiently.
In Tanzania, handloom weaving is practiced in many communities, especially in areas like Tanga, Morogoro, and Arusha where local artisans produce woven fabrics such as khanga and vitenge. Knowing how to fit wound pirns to a boat shuttle enables a weaver to prepare their loom efficiently for producing these traditional cloths, which can be sold at local markets like Mwanga Junction in Dar es Salaam or used for personal clothing, supporting small-scale weaving businesses and preserving cultural heritage.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should explain how to:
- Select tools and equipment
- Observe safety precautions
- Fit pirns and bobbins in shuttles
- Fit shuttles in the shuttle box
- Clean tools and workplace
- Store tools and equipment
Tathmini ya matokeo
Pirns or bobbins are correctly fitted to a boat shuttle
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to: Fit wound pirns or bobbins to a boat shuttle Principle: The student should explain the principles of: Fitting wound pirns or bobbins to a boat shuttle
Theories: The student should explain:
- How to fit wound pirn to boat shuttle
- Use a boat shuttle in weaving
Circumstantial knowledge:
Detailed knowledge about:
- Proper handling of working tools
- Safety measures when
- handling working tools
Swali
What is a pirn in handloom weaving?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado