Mada za sehemu hiiPerforming shedding motionMada 3
- Reading a drafting and lifting plan
- Opening shed according to lifting plan
- Using a shed stick on a frame loom
A drafting plan tells you which heald frame controls each warp yarn, while a lifting plan tells you which heald frames to raise or lower for each weft pass. Together, they allow you to weave specific patterns on a handloom.
Drafting Plan
A drafting plan is a sequence that shows how warp ends are drawn through the heald frames. It provides information on how to allocate ends to healds (heddles) according to the weave design. The drafting plan determines the number of heald shafts required for a particular weave. In this module, we use the straight draft method.
Straight Draft
In a straight draft, each warp end is controlled by a different heald frame in sequence. End one goes through heald frame one (H1), end two through heald frame two (H2), and so on. This creates a diagonal pattern when drawn on paper. The straight draft is the simplest drafting method and is commonly used for basic weaves like plain weave.
Lifting Plan
A lifting plan is the selection of heald shafts to be raised or lowered on each successive weft insertion. It indicates the order in which heald shafts should be lifted to produce a particular weave pattern. The lifting plan works together with the drafting plan: the drafting plan shows how warp yarns are threaded through healds, while the lifting plan shows which healds to lift for each pick.
Heald Shafts (Heddles)
Heald shafts are wire frames with loops (eyes) through which individual warp yarns are passed. They facilitate the movement of warp yarns during weaving and determine the weaving pattern. Each heald shaft can be raised or lowered independently to create sheds for weft insertion.
Treadle
A treadle is a foot pedal attached to heald shafts. When pressed, it raises or lowers the heald frames to create a shed. The treadles are connected to the heald shafts through a tie-up system.
Tie-up Plan
A tie-up plan shows how heald shafts are connected to each treadle. It guides the weaver on which treadles to press to lift specific heald shafts according to the lifting plan.
The lifting plan has three main uses:
-
Selects heald shafts — It determines which heald shafts should be raised or lowered for each weft insertion.
-
Orders the lifting sequence — It shows the exact order in which heald shafts must be lifted to create the desired weave pattern.
-
Facilitates tie-up — It helps determine how to connect heald shafts to treadles so that the weaver can produce the fabric according to the weave design.
The three plans are presented together in a specific arrangement:
- Drafting plan is shown above the weave design
- Lifting plan is shown to the right of the weave design
- The weave design and drafting plan share the same number of columns (representing warp ends)
- The number of rows in the drafting plan should be at least two, because a handloom needs at least two heald frames to weave any fabric
This is how to read and interpret a drafting and lifting plan using a simple plain weave:
Step 1: Understand the drafting plan
Look at the columns above the weave design. Each column represents one warp end. In a straight draft for 4 shafts:
- Column 1 → End 1 goes through H1
- Column 2 → End 2 goes through H2
- Column 3 → End 3 goes through H3
- Column 4 → End 4 goes through H4
Step 2: Understand the lifting plan
Look at the rows to the right of the weave design. Each row represents one weft pick (one passage of the shuttle). Each column in the lifting plan represents one heald shaft:
- Column 1 = Heald shaft 1 (H1)
- Column 2 = Heald shaft 2 (H2)
- Column 3 = Heald shaft 3 (H3)
- Column 4 = Heald shaft 4 (H4)
When a box is shaded or marked with (×), it means that particular heald shaft must be lifted for that pick.
Step 3: Read the lifting sequence
For pick 1 (first row of lifting plan):
- If H1 is marked (×), lift heald shaft 1
- If H2 is marked (×), lift heald shaft 2
- Continue for all marked shafts
For pick 2 (second row), repeat the process with the new combination of marked shafts.
Step 4: Connect to the treadles
The columns in the lifting plan are linked to treadles 1, 2, 3, and 4. When you press treadle 1, it lifts heald shaft 1, and so on. The tie-up plan connects each treadle to its corresponding heald shafts.
To practice reading these plans:
- Identify the number of warp ends (columns in the drafting plan)
- Identify the number of heald shafts used
- Read each row of the lifting plan from left to right
- For each row, note which shafts are marked (lifted)
- Determine which treadles to press based on the tie-up
- Repeat for each successive row to complete the pattern
Remember: The rows of the drafting plan connect to the columns of the lifting plan through the weave design. When a box is shaded in the weave design, the corresponding heald shaft must be lifted in the lifting plan.
In Tanzania, tailoring shops and small-scale weaving cooperatives in places like Arusha, Dar es Salaam, and Mwanza use handlooms to produce local fabrics such as kangas, Kikoi, and nguba. A tailor who understands drafting and lifting plans can create custom patterns for clients, repair woven items, or start a small weaving business. For example, a weaver in Arusha can use these plans to weave a patterned Kikoi that sells for TSh 25,000 to 50,000 in local markets, applying the same pattern-reading skills learned in this topic.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to appropriately:
- Select tools and equipment
- Observe safety precautions
- Read the drafting plan
- Read the lifting plan
- Observe safety precautions A Process
- Clean tools and work place
- Store tools and equipment
Tathmini ya matokeo
The drafting and lifting plans are correctly read
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to: Read a drafting and lifting plan Principle: The student should explain the principles of reading a drafting and lifting plan
Theories: The student should explain:
- Drafting and lifting plans
- Different uses of lifting plans in HW
- Presentation of weave design, lifting and drafting plans
Circumstantial knowledge: Detailed knowledge of:
- Workshop safety rules
- Safe handling of working tools
Swali
What information does a drafting plan provide in handloom weaving?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado