Mada za sehemu hiiPerforming picking motionMada 2
- Using a stick shuttle for picking on frame looms
- Using a flying/boat shuttle for picking on floor looms
Using a Stick Shuttle for Picking on Frame Looms
Picking is the motion that carries the weft yarn through the shed to interlace with the warp yarns. On frame looms, a stick shuttle is a simple tool used to insert the weft yarn from one side of the loom to the other.
Key Terms
Pick – A single length of weft yarn that is inserted through the warp yarns during weaving. The number of picks per inch affects how dense and appearance of the fabric will be.
Picking – The process of passing the weft yarn through the shed created by the shedding motion. It is one of the three primary motions in weaving, alongside shedding and beating-up.
Objectives of Picking
The main purposes of picking are:
- To throw or pass the shuttle at a pre-determined speed
- To deliver the weft yarn from one side of the loom to the other
- To insert the weft yarn through the shed to interlace with warp yarns
Types of Picking Mechanisms
There are three types of picking mechanisms used in weaving:
-
Negative or conventional picking – Uses a shuttle as a carrier with a pirn (weft yarn package) inside. This mechanism is used in handlooms.
-
Semi-positive picking – Uses a weft carrier guide. Commonly found in projectile looms.
-
Positive picking – The weft insertion is mechanically controlled by air, water, or rapier. Used in air-jet, water-jet, and rapier looms.
Note: Only the negative or conventional picking mechanism is used in handloom weaving.
Tools Used for Picking on Frame Looms
When using a stick shuttle on a frame loom, you will need:
- Frame loom – A four-sided rectangular weaving frame, portable and simple to set up
- Stick shuttle – A flat, narrow piece of wood with notches on both ends to hold the weft yarn
- Shed stick – A flat piece of wood used to create a shed between warp yarns
- Weaving comb – A tool with teeth used to press down the weft yarn after insertion
- Weaving needles – Needles used for hemming and correcting faults in the weave
Stick Shuttle
A stick shuttle is made from flat, narrow wood with notches at both ends. The weft yarn is wound around the shuttle and held in place by the notches. It is passed back and forth through the shed by hand. Short stick shuttles are used for narrow warp widths, while longer ones are used for wider projects.
Weaving Comb
A weaving comb has closely spaced teeth that push the weft yarn firmly against the previous row. This ensures the fabric becomes tight and uniform.
Weaving Needles
Weaving needles are used to weave in loose yarn ends, add different colors, or make hemming on finished fabric. Thicker needles are suitable for heavy yarns like wool, while finer needles work well for delicate fabrics like silk.
How to Use a Stick Shuttle on a Frame Loom
Follow these steps to perform picking using a stick shuttle:
-
Collect all tools and equipment – Frame loom, stick shuttle, yarn, shed stick, and weaving comb.
-
Attach the yarn to the shuttle – Loop the yarn onto the top groove of the stick shuttle.
-
Thread the yarn – At the top middle of the shuttle, pass the yarn behind the shuttle and to the middle of the two tips on the other side.
-
Wrap the shuttle – Wrap the yarn from top to bottom, then bottom to top in a diamond pattern. Continue until you have enough weft wound. The number of wraps depends on your yarn thickness.
-
Check the wrap – Ensure the yarn is wrapped loosely enough so the shuttle can pass easily between the warp yarns.
-
Create the shed – Use the shed stick to separate the upper and lower warp yarns according to your weaving design.
-
Insert the weft – Pass the stick shuttle from one hand to the other through the shed, carrying the weft yarn across the loom.
-
Beat up – Use the weaving comb to press the weft yarn firmly against the previous row.
-
Repeat – Create a new shed and continue passing the shuttle until you reach the desired fabric length.
Example: Weaving a Simple Fabric
If you are weaving a plain fabric with thin cotton yarn on a 30cm wide frame loom:
- Use a medium-length stick shuttle (about 35cm)
- Wrap the shuttle with about 20-25 passes of yarn
- Create a shed using the shed stick
- Pass the shuttle through, then beat with the weaving comb
- Alternate the shed for the next pick to create a simple over-under pattern
- Continue until you have a 10cm length of fabric
This process produces a simple woven cloth that can be used as a handkerchief or decorative piece.
Real-life application
In Tanzania, the skill of using a stick shuttle is applied by local weavers in villages like Tabora and Shinyanga to produce traditional fabrics such as kangas and vitenge. A small weaving group in a local market can use a stick shuttle on a frame loom to weave fabric pieces that they sell for around TZS 15,000 to TZS 30,000 per meter, providing income for families and preserving traditional weaving skills.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to correctly:
- Select tools and equipment
- Observe safety precaution
- Preform picking motion on frame loom by stick a shuttle
- Clean tools and work place A Process
- Store tools and equipment
Tathmini ya matokeo
Picking with the use of a stick shuttle is properly done
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to: Use a stick shuttle for picking on frame looms Principle: The student should explain the principles of: Using a stick shuttle for picking on frame looms
Theories: The student should explain:
- The objective of picking
- The types of picking mechanisms
- The tools used when using the stick shuttle
Circumstantial knowledge: Detailed knowledge of:
- Safety precautions for picking process
- Safe handling of working tools
- Permissible noise pollution levels
Swali
What is the meaning of the term pick in handloom weaving?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado