Mada za sehemu hiiPerforming picking motionMada 2
- Using a stick shuttle for picking on frame looms
- Using a flying/boat shuttle for picking on floor looms
Using a Flying/Boat Shuttle for Picking on Floor Looms
A flying shuttle (also called a boat shuttle) is a type of weft insertion tool used in weaving. It is designed to carry weft yarn across the warp yarns in a loom. The name "flying shuttle" comes from its ability to move rapidly back and forth across the loom, propelled by the picking mechanism. Unlike a stick shuttle, the flying shuttle can hold a bobbin or pirn of weft yarn inside it, allowing for longer continuous weaving without stopping to add more yarn.
The flying shuttle is typically made of wood and has a boat-like shape, which is why it is also called a boat shuttle. It is commonly used on floor looms where wider fabrics are produced.
There are two main types of flying shuttles used in handloom weaving:
End-Feed Shuttles
End-feed shuttles are equipped with stationary pirns. A pirn is a cone-shaped spool or bobbin on which yarn is wound. The yarn is pulled off the end of the pirn as a cone and passes through a tensioning device before going through a hole in the shuttle. The tensioning device can be an adjustable spring or a series of hooks around which the yarn passes.
Double Bobbin Shuttles
Double bobbin shuttles can hold and carry two bobbins or pirns of weft yarn at the same time. This design increases efficiency and versatility in weaving by allowing multiple weft insertions or the use of different colored weft yarns without changing shuttles frequently.
Flying shuttles offer several advantages over other types of shuttles:
- Faster fabric production – Weavers can produce fabric much faster compared to using stick shuttles
- Wider fabrics – The shuttle can traverse the full width of the loom, enabling production of wider fabrics
- Versatility – It accommodates various types of weft yarns and is suitable for different fabric types
- Continuous weaving – The pirn holds more yarn, reducing the need to stop and reload
Flying shuttles are used in three main areas:
-
Traditional weaving workshops – In many traditional handloom weaving practices, flying shuttles are still used due to their simplicity and effectiveness in producing local textiles and artisanal fabrics
-
Small-scale production – Smaller textile workshops and artisans may use flying shuttle looms for small-scale production or specialized fabric designs, where modern shuttleless looms are too expensive
-
Industrial weaving – Although shuttleless looms (air jet, water jet, rapier) are more common in modern textile mills, flying shuttle looms are still used in some regions for specific fabric types
Follow these steps to use a flying shuttle for picking on a floor loom:
Materials needed: Floor loom, boat shuttle, pirn or bobbin, yarn, picker stick
Steps:
-
Prepare the pirn – Wind the weft yarn onto the pirn, leaving a tail of about 5 cm. Place the wound pirn into the shuttle with the yarn coming out from the pirn. Ensure the exit hole of the shuttle faces the weaver.
-
Load the shuttle – Put the flying shuttle into the shuttle box on the loom.
-
Create the shed – Press the treadles according to the selected weaving design to create an opening (shed) between the warp yarns.
-
Throw the shuttle – Using the picker stick, pull the shuttle from one side of the shuttle box to the other. The shuttle passes through the opening shed, leaving the weft yarn around the selvedge.
-
Maintain even selvedge – Ensure the weft does not hang or pull too tightly. The selvedge (the edge of the fabric) should remain even and neat.
-
Repeat – Continue the picking motion for each weft insertion, alternating sides with each pick.
| Feature | Flying (Boat) Shuttle | Stick Shuttle |
|---|---|---|
| Yarn capacity | Holds a pirn or bobbin with large amount of yarn | Limited yarn wrapped on the shuttle itself |
| Speed | Faster due to smooth movement | Slower, requires more handling |
| Fabric width | Can produce wider fabrics | Better suited for narrower fabrics |
| Use | Floor looms | Frame looms and table looms |
| Construction | Boat-shaped wooden body with internal compartment | Flat, narrow piece of wood with notches |
The flying or boat shuttle is an important tool in handloom weaving that allows for efficient weft insertion on floor looms. It comes in two main types (end-feed and double bobbin) and offers significant advantages in terms of speed and fabric width. Understanding how to use this shuttle properly is an essential skill for weavers working with floor looms.
In Tanzania, flying shuttle looms are used in many traditional weaving workshops, particularly in regions like Tanga, Kilimanjaro, and Morogoro, where local textiles like kikoi and ngumi are produced. A young entrepreneur in Mwanza could use this skill to start a small-scale weaving business producing wider fabrics for sale at local markets, using a flying shuttle to increase production speed and create competitive pricing for products like tablecloths and bedspreads.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select tools and equipment
- Observe safety precaution
- Preform picking motion on floor loom by using a flying/boat shuttle
- Clean tools and work place
- Store tools and equipment A Process
Tathmini ya matokeo
Picking with the use of a flying/boat shuttle is properly done in floor looms
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to: Use a flying/boat shuttle for picking on floor looms Principle: The student should explain the principles of: Using a flying/boat shuttle for picking on floor looms
Theories: The student should explain:
- Flying/boat shuttle
- Types and advantages of flying shuttles
- How to apply flying shuttle in different areas.
Circumstantial knowledge: Detailed knowledge of:
- Safety precautions pertaining to picking process
- Safe handling of work tools
Swali
What is a flying shuttle (also called a boat shuttle) used for in handloom weaving?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado