Mada za sehemu hiiPerforming beating-up motionMada 2
- Performing weft beat-up using reed on table
- Beating the inserted pick using a tapestry comb for the frame loom
Performing Weft Beat-up Using Reed on Table
Beat-up is the third primary motion in weaving, following shedding and picking. It involves pushing the newly inserted weft yarn into position against the previous picks to create a tightly woven fabric. This note explains how to perform weft beat-up using a reed on table and floor looms.
Beat-up is the process of pushing the newly inserted weft yarn using a reed into position against the cloth fell, ensuring it is tightly integrated with the previous picks.
Cloth fell is the position of the last pick in woven fabric in the loom—the point where yarns become fabric.
Reed is a comb-like tool made of metal stripes used to push the weft into the cloth fell. It is mounted on a movable frame called the sley, which moves back and forth to beat or push the newly inserted weft pick into the cloth fell, compacting the fabric.
Sley is the part of the loom that holds the reed and allows it to move back and forth. It is also known as the beater.
The weft beating-up process has two main functions:
- To push the newly inserted weft yarn to the cloth fell end
- To produce a compact piece of fabric or cloth
Weft beat-up is classified into two categories:
Based on the Beating-up Process
| Type | Description |
|---|---|
| Single beating-up | The reed beats up the weft yarn into the cloth fell with a single motion for each pick. This is common in conventional weaving operations. |
| Multiple beating-up | Several beats are used for each pick of weft yarn. This technique is used when extra compactness or specific fabric characteristics are desired, such as when weaving dense or heavy fabrics. |
Based on Movement of the Reed
| Type | Description |
|---|---|
| Positive beat-up | The movement of the reed is directly controlled by the loom's mechanical system, ensuring consistent and uniform beat-up force. Commonly used in modern power looms. |
| Negative beat-up | Relies on the momentum of the reed and sley assembly to beat up the weft. It allows some flexibility and is often used in handlooms or looms designed for weaving special fabrics. |
Follow these four main procedures:
-
Prepare the warp: Ensure the warp yarns are properly wound on the warp beam and passed through the heddles and reed to the cloth beam. Adjust the tension of the warp yarns using the brake mechanism or tension knobs.
-
Create the shed: Lift or lower the appropriate shafts to create the shed—the opening between warp yarns where the shuttle passes through. On a table loom, this may be done manually by lifting or lowering the shafts using levers.
-
Insert the weft: Pass the shuttle carrying the weft yarn through the shed from one side of the loom to the other. Ensure the weft is laid evenly without twisting or bunching.
-
Beat-up the weft: After the shuttle has passed through the shed, bring the beater forward to push the weft yarn into place against the cloth fell. Apply consistent force to attain uniform fabric density.
The following steps are used in practical weaving:
- Collect equipment and materials (handloom, yarn, pirn, flying shuttle)
- Check and ensure warp yarns from the warp beam are in good tension
- Wind the weft yarn onto the pirn, leaving a tail of about 5 cm
- Place the pirn into the flying shuttle
- Create the shed for the shuttle to pass through by pressing treadles according to the selected weave design
- Hold the shuttle in one hand and pass it through the shed from one side of the loom to the other while holding the 5 cm weft yarn tail at the beginning
- Grasp the reed and gently draw it forward towards the cloth fell
- Use the reed to press the weft yarn into the cloth fell—ensure the reed is aligned with the previous weft pick. Apply consistent pressure to achieve uniform fabric density. Avoid pressing the reed too hard since it can cause the fabric to become too dense and stiff
- Repeat steps 5 to 8 until you have attained a fabric of significant length
Three factors must be considered for effective weft beat-up:
-
Warp tension: Regularly adjust the warp tension to prevent slackness or excessive tightness. This affects the quality of the weave and ensures the shed is large enough to allow the shuttle to pass through without catching on the warp yarns.
-
Consistent beat-up force: Maintain consistent beat-up force for uniform fabric density.
-
Avoid over-packing: Do not over-pack the weft yarns, as this can lead to an overly tight weave that reduces fabric flexibility.
Suppose a weaver is producing a plain cloth using a table loom. After inserting the weft yarn through the shed using a stick shuttle, the weaver must perform the beat-up motion:
- The reed is positioned away from the cloth fell after the previous beat-up
- The weaver draws the reed forward toward the cloth fell
- The reed presses the weft yarn against the previous pick
- The reed is returned to its starting position for the next pick
If the weaver applies too much force during beat-up, the fabric becomes stiff and dense. If the force is too weak, the fabric will be loose and have gaps. The correct approach is to apply moderate, consistent pressure so that each weft row sits tightly against the previous one, producing an even and flexible fabric.
In Tanzania, handloom weaving is commonly used to produce local textiles such as khanga, kitenge, and Kikoi. A small-scale weaver in Arusha or Mwanza who masters the weft beat-up technique using a reed can produce high-quality fabrics for sale at local markets like Mwembe Tayari in Mombasa or Sokoni market in Dar es Salaam. Consistent beat-up ensures the fabric is durable and compact, which customers prefer when buying cloth for clothing or household use.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to correctly: A Process
- Select tools and equipment
- Observe safety precaution
- Beat weft pick using a reed
- Return beater
- Clean tools and equipment
- Store tools and equipment
Tathmini ya matokeo
A reed is properly used in beating up a weft in the table and floor loom
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to:Perform weft beat-up using reed on table and floor looms Principle: The student should explain the principles of: performing weft beat-up using reed on table and floor looms
Theories: The student should explain:
- The objective of picking,
- Types of picking mechanisms and identify tools used when using the stick shuttle
Circumstantial knowledge: Detailed knowledge of:
- Safety precautions pertaining to picking process
- Safe handling of working tools
Swali
What is the primary purpose of the beat-up motion in handloom weaving?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado