Mada za sehemu hiiPerforming site surveyMada 5
- Determining boundaries
- Determining benchmark and beacon
- Taking readings and booking
- Booking levelling readings
- Analysing data by HI and RF
When starting any construction project, whether a house, classroom, or road, precise measurements are essential. Two fundamental reference points used on every construction site are benchmarks and beacons. A benchmark is a fixed point with a known elevation (height) used as a reference for levelling, while a beacon is a temporary marker that shows the exact location of a structure's corners or boundaries on the ground.
A benchmark is a permanent or temporary reference point whose elevation above sea level (or a chosen datum) is known and recorded. All other height measurements on the site are taken from the benchmark.
Types of benchmarks:
- Permanent benchmark – A fixed point established by a surveyor, such as a metal bolt on a concrete structure or a mark on a permanent building. These remain for the life of the project.
- Temporary benchmark (TBM) – A point established by the contractor on-site, often on a firm object like a large stone or a temporary concrete block, used during construction when the permanent benchmark is far away.
A beacon (also called a peg or station mark) is a physical marker placed on the ground to define the exact horizontal position of structural elements. Beacons indicate where walls, columns, or boundaries will be built.
Common beacon markers:
- Wooden pegs driven into the ground
- Steel rods or nails
- Concrete pillars for permanent markers
Using benchmarks and beacons correctly ensures that:
- Structures are level and plumb
- Buildings are positioned correctly on the site
- Different construction teams work from the same reference
- The final structure matches the approved site plan
- Levelling instrument (dumpy level or automatic level)
- Staff or levelling rod
- Measuring tape (30m or longer)
- Survey pegs and markers
- String line or chalk line
- Spirit level
- Plumb bob
- Personal protective equipment: hard hat, safety boots, gloves, high-visibility vest
Step 1: Locate or create a reference point
Find an existing permanent benchmark near the site (such as a surveyed point on a nearby road or building). If none exists, create a temporary benchmark on a stable object.
Step 2: Set up the levelling instrument
Place the dumpy level or automatic level on a tripod at a convenient location where you can see both the reference point and your working area. Level the instrument using the foot screws and circular bubble.
Step 3: Take a back sight (BS)
Aim the telescope at the staff held on the known benchmark. Read and record the height value. This reading plus the known elevation of the benchmark gives you the height of instrument (HI).
HI=Benchmark elevation+Back sight reading
Step 4: Establish new benchmark points
From the HI, take foresight (FS) readings at points where you need new benchmarks. The elevation of each new point is:
New benchmark elevation=HI−Foresight reading
Step 5: Mark and record
Mark each new benchmark clearly (using a nail, paint, or peg) and record its elevation in a site notebook.
Step 1: Review the site plan
Study the drawings showing the building layout, dimensions, and orientation. Identify all corner points and boundary lines.
Step 2: Establish reference lines
Using a measuring tape and string line, measure from an existing boundary or reference point (such as a road edge or neighbouring wall) to mark the building's outline on the ground.
Step 3: Fix corner beacons
At each corner of the proposed structure, drive a wooden peg firmly into the ground. Use a plumb bob to ensure the peg is vertically aligned.
Step 4: Check diagonal measurements
Measure diagonally between opposite corners to verify the layout is square (right-angled). For a rectangle:
- If the diagonals are equal, the corners are square
- If they differ, adjust the positions until they match
Step 5: Secure and protect
Tie a bright ribbon or marker around each beacon so it remains visible. Protect beacons from disturbance by marking the area or surrounding them with loose soil.
A contractor needs to set out a rectangular classroom measuring 10m × 8m on a site in Morogoro. The permanent benchmark at the site entrance has an elevation of 245.500m.
Step 1: The contractor sets up the level and takes a back sight on the benchmark, reading 1.850m.
HI=245.500+1.850=247.350 m
Step 2: The contractor establishes a temporary benchmark near the building area by taking a foresight reading of 0.950m.
TBM elevation=247.350−0.950=246.400 m
Step 3: Using a measuring tape and string line, the contractor marks the first corner peg. From the site boundary, the first wall is measured 3.000m. The classroom dimensions are marked (10m along one side, 8m along the adjacent side). Diagonal measurements are taken to ensure the layout is square.
The classroom corner beacons are now ready for foundation excavation.
- Failing to check the instrument level before taking readings
- Placing beacons in soft soil where they may shift
- Not protecting beacons from accidental removal
- Using an unstable reference point for the benchmark
In Tanzania, a mason or site foreman uses benchmarks and beacons on nearly every building project. When constructing a simple three-room house in a village like Mpanda or Mkuranga, the builder must first establish a benchmark from the nearest road level to ensure the floor height meets local flood safety requirements. Then, using a tape measure and wooden pegs, the builder marks the house corners as beacons so the walls are built in the correct position. Without these reference points, the walls could be uneven or misaligned, leading to costly repairs or unsafe structures.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The students should be able to:
- Identify suitable locations for benchmarks and beacons
- Establish accurate elevation points for benchmarks
- Set up beacons for reference during surveying
- Ensure benchmarks and beacons are clearly marked
- Document their locations and specifications
Tathmini ya matokeo
Benchmarks and beacons are determined in compliance with survey standards and project specifications
Tathmini ya maarifa
Detailed knowledge of:
Method used: The students should explain various techniques for establishing and utilizing benchmarks and beacons in construction
Principles: The student should explain the principles involved in determining benchmark and beacon
Theories: The students should explain:
- The role of benchmarks and beacons in project alignment and accuracy
- The impact of accurate benchmarks on construction quality
- The significance of technology in determining benchmarks and beacons Circumstantial Knowledge: Detailed knowledge about:
- Legal requirements for benchmarks and beacons in construction
- Ethical considerations in surveying and land measurement practices
Swali
What is the primary purpose of a benchmark on a construction site?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado