Mada za sehemu hiiPerforming site surveyMada 5
- Determining boundaries
- Determining benchmark and beacon
- Taking readings and booking
- Booking levelling readings
- Analysing data by HI and RF
Taking Readings and Booking
In construction work, before any building can be erected, surveyors and masons must measure and record the existing ground levels, distances, and positions of various points on the site. This process is called taking readings, and the systematic recording of these measurements in a field notebook is called booking. Accurate readings and proper booking ensure that buildings are constructed on level ground, at the correct heights, and in the right positions.
The main purposes of taking readings on a construction site are:
- To determine the difference in elevation (height) between different points on the site
- To establish benchmark points — fixed reference points from which all other heights are measured
- To ensure the building will be level and properly aligned
- To calculate the amount of earthwork (cutting and filling) needed to prepare the site
- To verify that construction work is being carried out at the correct levels as specified in the plans
Level Readings (Height Measurements)
A level reading is the vertical distance measured from a horizontal line of sight to a point. When using a levelling instrument (such as a dumpy level or automatic level), the reading is taken on a graduated staff held at the point being measured.
Backsight (BS)
The first reading taken after setting up the instrument, always measured on a point of known elevation (benchmark).
Foresight (FS)
The last reading taken to a point of unknown elevation, used to transfer the level to a new point.
Intermediate Sight (IS)
Readings taken to other points between the backsight and foresight to determine their elevations.
Booking is the act of recording all readings taken in a field notebook in a clear and organized manner. Proper booking allows the surveyor to calculate elevations and check for errors.
Standard Booking Format
A typical field booking page has columns for:
| Point | Backsight (BS) | Intermediate Sight (IS) | Foresight (FS) | Height of Instrument (HI) | Reduced Level (RL) |
|---|---|---|---|---|---|
| BM | 1.550 | 101.550 | 100.000 | ||
| A | 1.230 | 100.320 | |||
| B | 0.850 | 100.700 | |||
| P1 | 0.980 | 100.570 |
How to Book
- Point: Write the identification of the point where the staff was held (BM, A, B, P1, etc.)
- BS: Record the backsight reading in this column
- IS: Record any intermediate sights in this column
- FS: Record the foresight reading in this column
- HI: Calculate Height of Instrument = RL of benchmark + BS
- RL: Calculate Reduced Level = HI − reading at that point
Rules for Accurate Booking
- Always use a pencil (2H or HB) for recording — ink may run if the notebook gets wet
- Write clearly and neatly so others can read your notes
- Never erase mistakes; instead, draw a single line through the error and write the correct value above
- Record readings to the nearest millimetre (three decimal places, e.g., 1.550)
- Include the date, weather conditions, and your name in the notebook header
A survey team is preparing a site in Mwanza for a small warehouse. They set up a dumpy level near the site entrance. The benchmark (BM) has a Reduced Level of 100.000 m.
Step 1: The surveyor takes a backsight on the benchmark: BS = 1.525 m
Height of Instrument (HI) = RL of BM + BS = 100.000 + 1.525 = 101.525 m
Step 2: Staff is held at point A (future corner of building):
- Intermediate sight: IS = 1.385 m
- RL of A = HI − IS = 101.525 − 1.385 = 100.140 m
Step 3: Staff is held at point B (opposite corner):
- Intermediate sight: IS = 0.950 m
- RL of B = HI − IS = 101.525 − 0.950 = 100.575 m
Step 4: Staff is moved to a new location to continue surveying:
- Foresight to turning point P1: FS = 1.700 m
- RL of P1 = HI − FS = 101.525 − 1.700 = 99.825 m
This information is now booked in the notebook and can be used to determine how much earthwork is needed to level the site before construction begins.
- Parallax error: Not looking straight at the staff when reading — always ensure the telescope crosshairs are in sharp focus
- Staff not held vertically: Tilting the staff gives false readings — use a plumb bob to keep it vertical
- Booking errors: Recording the wrong number or reading the wrong column
- Instrument not level: Always check the bubble before taking readings
- Sighting errors: Taking readings past obstacles or through heat shimmer
When taking readings on a construction site, always wear:
- A hard helmet to protect your head
- Safety boots with steel toe caps
- High-visibility vests so you can be seen by machinery operators
- Gloves when handling equipment in rough conditions
Never set up a level instrument where vehicles or heavy equipment are moving, and always watch your footing on uneven ground.
In Tanzania, masons and site foremen use taking readings and booking skills daily when preparing foundations for houses, classroom blocks, or market stalls. For example, before laying the foundation for a new shop in Arusha, the site team would take level readings at several points around the plot and book them to determine if the ground is even. If the reduced levels show that one corner is 35 cm lower than another, they know they need to bring in fill soil (mchanga) to raise that area before the foundation concrete is poured — ensuring the building will be stable and doors will open properly once constructed.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The students should be able to:
- Use surveying instruments to take accurate readings
- Record measurements systematically
- Ensure data accuracy and consistency
- Organise readings for easy reference
- Document findings clearly in a logbook
Tathmini ya matokeo
Readings taken and recorded in compliance with survey procedures and project requirements The st
Tathmini ya maarifa
Detailed knowledge of:
Method used: The students should explain the processes involved in measuring, recording, and booking data in construction projects
Principles: The students should explain the following principles: udent should explain the principles involved in taking readings and booking
Theories: The students should explain:
- The significance of data accuracy in project management
- The role of technology in enhancing measurement and recording practices
- The impact of effective data management on decision-making Circumstantial Knowledge: Detailed knowledge about:
- Compliance with industry standards for data recording and reporting
Swali
Booking in site surveying refers to:
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado