Mada za sehemu hiiManaging hazardsMada 4
- Controlling mechanical hazards
- Controlling chemical hazards
- Controlling physical hazards
- Carrying out risk assessment
Controlling Chemical Hazards in Construction
Chemical hazards are substances that can cause harm to workers' health or safety when they come into contact with the body, are inhaled, or are swallowed. In masonry and brick-laying work, many materials contain chemicals that pose health risks if not handled properly. Controlling these hazards is essential to maintain a safe working environment and prevent accidents, injuries, or long-term health problems such as skin irritation, respiratory problems, or poisoning.
In masonry and brick-laying, workers are exposed to various chemical substances:
- Adhesives and sealants – used for fixing tiles, bricks, and insulation materials. These often contain solvents that release harmful vapours.
- Solvents and thinners – used for cleaning tools and dissolving paints or adhesives. Examples include acetone, turpentine, and white spirit.
- Cement and concrete mixes – wet cement contains chromium, which can cause skin dermatitis and allergic reactions.
- Paints and coatings – may contain lead, pigments, or volatile organic compounds (VOCs) that are toxic when inhaled.
- Cleaning chemicals – acids and alkalis used for removing stains or cleaning surfaces can cause chemical burns.
- Dust – silica dust from cutting or grinding bricks and concrete can cause serious lung damage if inhaled over time.
Understanding how chemicals enter the body helps workers protect themselves:
- Inhalation – breathing in vapours, fumes, or dust particles. This is the most common route in construction.
- Skin contact – touching chemicals directly or contaminated surfaces causes irritation or allergic reactions.
- Ingestion – swallowing chemicals accidentally, often due to eating or drinking in contaminated areas.
- Eye contact – splashes or fumes can cause serious eye irritation or damage.
When controlling chemical hazards, follow this order from most effective to least effective:
- Elimination – remove the hazardous chemical from the workplace entirely.
- Substitution – replace the dangerous chemical with a safer alternative.
- Engineering controls – isolate workers from the hazard using ventilation, barriers, or enclosed processes.
- Administrative controls – change work procedures, provide training, or limit exposure time.
- Personal protective equipment (PPE) – use gloves, goggles, respirators, and protective clothing as the last line of defence.
Proper procedures protect workers and prevent accidents:
Handling
- Read all product labels and Safety Data Sheets (SDS) before use.
- Work in well-ventilated areas to avoid breathing vapours.
- Never eat, drink, or smoke while handling chemicals.
- Use the minimum amount required for the task.
- Keep containers closed when not in use.
Storage
- Store chemicals in a designated, well-ventilated area away from direct sunlight and heat sources.
- Keep incompatible chemicals separate (for example, acids away from alkalis).
- Store containers on shelves or pallets, never on the floor.
- Ensure storage areas have warning signs and spill containment measures.
- Keep emergency eyewash stations and first aid kits nearby.
Disposal
- Never pour chemicals down drains or onto the ground.
- Use approved containers for chemical waste.
- Follow local regulations for disposing of hazardous materials.
- Label all waste containers clearly.
Wearing appropriate PPE is essential when working with chemicals:
- Chemical-resistant gloves – protect hands from skin contact
- Safety goggles or face shields – prevent eye splashes
- Respirators or dust masks – filter harmful vapours and particles
- Safety boots – protect feet from spills and falling objects
- High-visibility vests – ensure workers are seen in hazardous areas
- Hard helmets – protect from falling objects or impacts
- Protective aprons or coveralls – shield body from splashes
Being prepared for chemical accidents saves lives:
- Know the location of emergency eyewash stations, fire extinguishers, and first aid kits.
- In case of eye contact, flush eyes with clean water for at least 15 minutes.
- If chemicals splash on skin, remove contaminated clothing and wash the area thoroughly with soap and water.
- If chemicals are swallowed, do not induce vomiting—seek immediate medical help.
- In case of large spills, evacuate the area and inform the supervisor.
- Report all incidents and near-misses to the supervisor.
Scenario: Juma is working on a construction site in Dar es Salaam. He needs to use a solvent-based adhesive to fix floor tiles in a small room. The room has poor ventilation.
Applying control measures:
- First, check the SDS – Juma reads the adhesive's Safety Data Sheet to understand the hazards.
- Use engineering controls – He opens windows and uses a portable fan to improve ventilation before starting work.
- Select PPE – He wears chemical-resistant gloves, safety goggles, and a respirator mask.
- Safe storage – He keeps the adhesive container closed when not in use and stores leftover solvent in a labelled container.
- Clean up – After work, he disposes of empty containers properly and washes his hands with soap and water.
By following these steps, Juma reduces his risk of chemical exposure significantly.
In Tanzania, construction workers in cities like Arusha, Mwanza, or Dodoma regularly handle cement, adhesives, and solvents when building houses or renovating shops. For example, a mason mixing mortar or applying tile adhesive should always wear gloves and avoid touching their face, because prolonged skin contact with wet cement can cause severe dermatitis. Using proper PPE and safe handling practices prevents costly medical treatment and ensures workers can continue earning their livelihood without suffering long-term health problems.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Identify chemical hazards associated with masonry materials (e.g., cement, adhesives).
- Assess risks related to chemical exposure during mixing and application.
- Implement safety protocols for handling and mixing chemicals.
- Use appropriate personal protective equipment (PPE) such as gloves, masks, and goggles.
- Store chemicals safely and according to regulations.
- Label all chemical containers clearly and accurately.
- Maintain a clean and organised workspace to prevent chemical contamination.
Tathmini ya matokeo
Chemical hazards controlled as per safety standards, OSHA regulations, and workplace procedures.
Tathmini ya maarifa
Detailed knowledge of:
Method used: The students should explain procedures for identifying and controlling chemical hazards in various environments.
Principles: The student should explain the principles involved in controlling chemical hazards
Theories: The students should explain:
- Role of safety protocols in preventing chemical exposure and accidents.
- Impact of proper storage and handling procedures on safety. Circumstantial Knowledge: Knowledge about:
- Types of chemicals and their hazards.
- Safety measures, including Personal Protective Equipment (PPE) and spill response techniques.
Swali
What is the most common route through which construction workers are exposed to chemical hazards in masonry and brick-laying work?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado