Mada za sehemu hiiManaging hazardsMada 4
- Controlling mechanical hazards
- Controlling chemical hazards
- Controlling physical hazards
- Carrying out risk assessment
Carrying Out Risk Assessment
Risk assessment is a systematic process used to identify potential hazards in the workplace, evaluate the likelihood and severity of harm, and determine appropriate control measures to prevent accidents and injuries. In masonry and brick-laying work, conducting a risk assessment before starting any task helps protect workers, visitors, and the public from dangers such as falling objects, unstable structures, electrical hazards, and tool-related injuries. This process is a legal requirement under occupational safety regulations in Tanzania and is essential for maintaining a safe construction site.
-
Hazard – Any source or situation with the potential to cause harm in terms of injury, ill health, damage to property, or a combination of these.
-
Risk – The likelihood that a hazard will cause harm, together with the severity of that harm.
-
Risk Assessment – The overall process of identifying hazards, analyzing and evaluating risks, and determining control measures.
-
Control Measures – Actions taken to eliminate, reduce, or minimize risks.
-
Likelihood – The probability that a hazard will cause harm.
-
Severity – The seriousness of the potential harm if an incident occurs.
A risk assessment follows a logical five-step process. Each step builds on the previous one, ensuring a thorough examination of workplace hazards.
Step 1: Identify Hazards
Walk around the workplace and look for anything that could cause harm. In masonry work, common hazards include:
- Unstable scaffolding or working at height
- Falling bricks, tools, or debris
- Sharp tools such as trowels and hammers
- Heavy materials (cement bags, bricks)
- Electrical equipment and cables
- Dust and chemical fumes from cement
- Open trenches or excavations
- Slippery or uneven surfaces
- Weather conditions (rain, extreme heat)
Ask workers, supervisors, and site managers about previous incidents or near-misses. Review accident records and safety data sheets for materials being used.
Step 2: Determine Who Might Be Harmed and How
For each hazard identified, consider who could be injured:
- Masonry workers directly handling materials
- Helpers and apprentices
- Supervisors and site managers
- Visitors or clients visiting the site
- Members of the public passing by the site
- Emergency responders
Describe how each group could be harmed (for example, "bricklayer may suffer cuts from handling broken bricks" or "passerby may be hit by falling debris").
Step 3: Evaluate Risks and Decide on Control Measures
Assess the risk by considering:
- Likelihood – How likely is it that harm will occur? (Rare, Unlikely, Possible, Likely, Certain)
- Severity – How serious would the harm be? (Slight, Minor, Moderate, Major, Catastrophic)
The level of risk is determined by combining likelihood and severity. Use the formula:
Risk Level=Likelihood×Severity
Control measures should follow this hierarchy:
- Elimination – Remove the hazard completely (e.g., remove unstable materials from the work area)
- Substitution – Replace with a less hazardous option (e.g., use pre-mixed mortar instead of mixing cement powder)
- Engineering Controls – Isolate people from the hazard (e.g., install guardrails around open edges)
- Administrative Controls – Change work procedures (e.g., rotate tasks to reduce exposure time)
- Personal Protective Equipment (PPE) – Protect workers with gear (e.g., hard hats, safety goggles, gloves)
Step 4: Record Findings
Document the risk assessment using a risk assessment form or template. The record should include:
- Date of the assessment
- Name of the person conducting the assessment
- Location or work area assessed
- List of identified hazards
- Who could be harmed
- Risk rating (before and after control measures)
- Control measures to be implemented
- Review date
Step 5: Review and Update
Regularly review the risk assessment, especially when:
- New work processes or equipment are introduced
- Accidents or near-misses occur
- Changes in weather or site conditions happen
- New hazards are identified
- At specified intervals (e.g., weekly on construction sites)
A masonry team at a construction site in Mwanza is preparing to build a 3-meter-high boundary wall using traditional brick-laying methods. The site supervisor conducts a risk assessment.
Identified Hazard 1: Working at Height (3 meters)
- Who might be harmed: Bricklayers and helpers working on scaffolding
- How they might be harmed: Falls from height causing serious injury or death
- Likelihood: Possible (workers may lose balance)
- Severity: Catastrophic (fall from 3 meters)
- Risk Level: 5 × 5 = 25 (Very High Risk)
Control Measures:
- Install guardrails and toe boards on all scaffolding platforms
- Ensure scaffolding is properly braced and inspected before use
- Provide safety harnesses for workers on elevated platforms
- Limit working height to safe limits and rotate workers
After Control Measures:
- Likelihood: Unlikely (guards and harnesses in place)
- Severity: Major (some injury possible but reduced)
- Risk Level: 2 × 4 = 8 (Low Risk)
Identified Hazard 2: Falling Objects (Bricks and Tools)
- Who might be harmed: Workers below the scaffolding and visitors
- How they might be harmed: Impact injuries from falling objects
- Likelihood: Likely (objects may be accidentally knocked)
- Severity: Major (can cause fractures or head injuries)
- Risk Level: 4 × 4 = 16 (High Risk)
Control Measures:
- Erect safety netting below work areas
- Use tool lanyards to secure tools
- Establish exclusion zones with safety barriers and warning signs
- Ensure all workers wear hard helmets
A typical risk assessment form includes the following columns:
| Hazard | Who Might Be Harmed | Current Risk (L × S) | Control Measures | Residual Risk (L × S) | Action By | Date |
|---|---|---|---|---|---|---|
| Working at height | Bricklayers | 5 × 5 = 25 | Guardrails, harnesses | 2 × 4 = 8 | Site Supervisor | 15/01/2025 |
| Falling objects | Workers, visitors | 4 × 4 = 16 | Safety netting, barriers | 2 × 3 = 6 | Foreman | 15/01/2025 |
| Dust from cement | Masonry workers | 3 × 3 = 9 | Dust masks, wet surfaces | 1 × 3 = 3 | Masonry Team | 15/01/2025 |
Risk assessment is critical in masonry and brick-laying because:
- Construction sites are dynamic environments with constantly changing hazards
- Manual handling of heavy materials increases injury risk
- Working with tools, machinery, and at heights presents significant danger
- Proper risk assessment prevents work stoppages caused by accidents
- It demonstrates compliance with Tanzanian labor and safety laws
A small masonry crew in Dar es Salaam bidding for a house construction contract must submit a site-specific risk assessment to the client before work begins. By documenting hazards like unstable excavations during foundation digging and planning control measures such as trench shoring and daily site inspections, the crew not only wins the contract but also avoids costly accidents. Using a simple risk assessment template saved on a phone, they record that an open foundation trench (likelihood: possible × severity: major = high risk) will be controlled by installing barriers and marking the area with high-visibility tape, reducing the residual risk to low before starting excavation.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Understand the importance of risk assessments.
- Identify potential hazards in the work environment.
- Evaluate the likelihood and severity of risks.
- Gather relevant information for assessment.
- Use appropriate risk assessment tools.
- Develop a risk assessment report with findings.
- Propose control measures to mitigate risks.
Tathmini ya matokeo
Risk assessment is carried out as per safety standards, OSHA regulations, and workplace procedures
Tathmini ya maarifa
Detailed knowledge of:
Method used: The students should explain procedures for conducting a risk assessment in various environments.
Principles: The student should explain the principles involved in carrying out risk assessment.
Theories: The students should explain:
- Risk assessment is the role of preventing accidents and ensuring safety.
- Impact of risk prioritization on resource allocation and safety measures. Circumstantial Knowledge: Knowledge about:
- Tools and techniques for risk assessment (e.g., checklists, matrices).
- Documentation and communication of assessment findings and recommendations.
Swali
What is the formula used to calculate the risk level in a risk assessment?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado