Mada za sehemu hiiConstructing lintelsMada 3
- Constructing cast in situ lintels
- Constructing pre-cast lintels
- Fixing metal and wood lintels
Fixing Metal and Wood Lintels
When building walls with door or window openings, we must install horizontal support members called lintels over those openings. These lintels carry the weight of the wall above the opening and transfer it safely to the surrounding walls. This study note explains how to fix two common types of lintels: metal lintels and wood lintels.
Metal lintels are structural components made from steel or other durable metals. They are commonly used in modern construction because they can support heavy loads over wide openings.
Steel Lintels
Steel lintels are the most common type of metal lintel. They are made from mild steel or stainless steel and come in various shapes including angles, channels, or box sections. Steel lintels are often galvanised or coated with zinc to prevent rust and corrosion.
Galvanised Steel Lintels
These lintels have a zinc coating that protects against corrosion. They are ideal for exterior walls or in damp environments where moisture is present.
Stainless Steel Lintels
Stainless steel lintels are highly resistant to rust and corrosion. They are used in harsh environments or where the building must last a long time without maintenance.
Understanding potential problems helps ensure proper installation and longevity.
Corrosion
Metal lintels can corrode when exposed to moisture or chemicals. Using galvanised or stainless-steel variants prevents this problem.
Deflection
If a lintel is too small for the load or improperly sized, it may bend or sag. This emphasizes the importance of accurate load calculations and proper sizing before installation.
Poor Installation
Incorrect bedding or misalignment can compromise the structural integrity of the lintel. Always follow the manufacturer's guidelines and ensure proper support.
Wooden lintels are traditional structural elements used to support weight above openings. While less common today, they are still used in certain applications.
When to Use Wood Lintels
Wooden lintels are best suited for:
- Small openings or low-load applications
- Historic buildings or restoration projects
- Timber-framed structures
- Designs where exposed timber is desired for aesthetic purposes
Advantages of Wood Lintels
- Provides a natural, traditional look
- Lightweight and easy to cut or shape on-site
- Made from renewable resources
- Often cheaper than steel or concrete for small-scale projects
Disadvantages of Wood Lintels
- Susceptible to rot, insect damage, and weathering if not properly treated
- Not suitable for heavy loads or large openings
- Combustible and may not meet fire safety regulations
- Requires regular inspection and treatment
The following steps guide you through installing metal or wooden lintels properly:
Step 1: Check the Building Plans
Review the building plans or specifications to determine the exact location and dimensions of the lintel required for the opening.
Step 2: Measure and Mark
Measure and mark the correct lintel length. Ensure it includes the required end bearings of not less than 150 mm on each side of the opening. Cut the lintel accurately to size.
Step 3: Position the Lintel
Position the lintel onto the supports, ensuring it extends evenly beyond both sides of the opening to achieve adequate bearing. Consider safe lifting methodology to avoid accidents from falling objects.
Step 4: Check Alignment
Check the alignment using a spirit level to ensure the lintel is horizontal and properly positioned.
Step 5: Secure Wooden Lintels
For wooden lintels, secure them firmly with nails and bed them properly in mortar to ensure stability.
Step 6: Secure Metal Lintels
For metal lintels, use anchor bolts and screws as necessary to secure them firmly to the masonry or wall.
Step 7: Fill Gaps
Fill the gaps between the lintel and masonry neatly with mortar.
Step 8: Finish
Smooth the mortar joints with a trowel for an even finish.
Step 9: Clean Up
Clean tools and workspace thoroughly after completion.
A window opening in a wall is 1200 mm wide. The specification requires a minimum end bearing of 150 mm on each side. What is the minimum lintel length required?
Solution:
Total lintel length = opening width + left bearing + right bearing
= 1200 mm + 150 mm + 150 mm
= 1500 mm
Therefore, the minimum lintel length should be 1500 mm (or 1.5 metres).
- End bearing: Ensure a minimum bearing of 150 mm on each side for metal lintels to properly transfer loads
- Level: Always check with a spirit level to ensure horizontal accuracy
- Corrosion protection: For metal lintels, ensure proper coating or galvanisation
- Decay protection: For wood lintels, apply proper treatment against moisture, insects, and decay
- Safety: Use proper lifting techniques and secure temporary supports during installation
In Tanzania, when constructing a domestic house in areas like Mwanza or Arusha, a mason may need to replace a damaged wooden lintel above a window with a galvanised steel lintel. For example, if a local hardware shop sells a 1.5-metre galvanised steel lintel for TZS 85,000, the homeowner must ensure the new lintel has proper end bearings of at least 150 mm on each side and is correctly secured with mortar and anchor bolts to prevent corrosion and structural failure in the wall.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Interpret drawings
- Prepare materials
- Prepare tools and equipment
- Fix the lintel
- Clean the work area and store tools
Tathmini ya matokeo
Metal and wood lintels are fixed as per technical specification to ensure structural integrity and proper load bearing capacity over wall openings
Tathmini ya maarifa
Detailed knowledge of:
Method used: The student should explain different procedures of constructing lintels
Principles: The student should explain the principles involved in fiixing metal and wood lintels
Theories: The student should explain:
- Types of lintels
- Materials and their properties (Steel)
- Tools and specific functions
- Different mixing ratios
- Types of reinforcements
- Importance of curing Circumstantial knowledge:
Detailed knowledge about:
- Safety procedures to be observed during construction of lintel
- First aid
- Environmental issues
Swali
What is the minimum end bearing required on each side of a lintel according to the lesson?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado