Mada za sehemu hiiPerforming architectural drawingsMada 3
- Drawing floor plans and foundation plans
- Drawing elevations
- Drawing sections
Drawing Elevations
An elevation drawing is a scaled, two-dimensional picture that shows the vertical view of a building's exterior. It illustrates how the building will appear from a specific direction—front, back, left, or right. Unlike a floor plan, which shows the building from above, an elevation shows the height and external features of the building.
Elevations are essential in masonry and bricklaying because they help masons understand the building's height, appearance, and where to place windows, doors, and other external features. They also show wall finishes, roof slopes, ground levels, and sometimes floor levels.
Elevation drawings serve several important purposes in construction:
- Visualisation: They help clients and builders visualise the finished building before construction begins.
- Construction guidance: They provide masons with clear information about wall heights, window and door positions, and rooflines.
- Material planning: They help in planning external finishes and protective features.
- Design details: They show design features such as porches, balconies, and rooflines that cannot be seen in floor plans.
For example, a kitchen floor plan may show where cabinets are placed, but it cannot show the height of worktops or overhead cabinets. This information is only found in elevation drawings.
Elevations are named according to the direction they view the building:
| Type of Elevation | Description |
|---|---|
| Front elevation | The view from the main entrance of the building |
| Back (or rear) elevation | The view from behind the building |
| Left side elevation | The view from the left side |
| Right side elevation | The view from the right side |
In some drawings, elevations are named using compass directions (north, south, east, or west) instead of left or right. This helps avoid confusion, especially when a building is oriented on a site.
Elevations may also be numbered for clarity, such as E[01] for front, E[02] for left, E[03] for rear, and E[04] for right.
The floor plan shows arrows indicating the direction of each elevation view. When you look at a floor plan, arrows pointing outward from the walls show which direction each elevation represents. This helps you match the elevation to the correct view of the building.
For example, if the front of a house faces north, the front elevation may be called the "North Elevation." The key to understanding elevation names is usually provided on the floor plan for easy reference.
Elevation drawings are drawn to the same scale as floor plans. The most common scales are:
- 1:100 (1 centimetre on the drawing represents 100 centimetres or 1 metre in real life) — used for overall building views
- 1:50 (1 centimetre represents 50 centimetres) — used for more detailed drawings
Using the same scale for both floor plans and elevations makes it easier to project information from one drawing to another.
The following procedure shows how to draw a building elevation from a floor plan:
Step 1: Select the Scale and Determine Height
Choose an appropriate scale for the elevation, such as 1:100 or 1:50. Determine the height of the building or walls, referencing the floor level. Make sure the elevation will fit neatly on your drawing sheet.
Step 2: Draw the Building Envelope
Begin by projecting vertical lines from the floor plan to establish the building's outline. Use measurements from the floor plan and roof plan. Determine the bottom of the elevation and the height of the walls. Draw a horizontal line to represent the ground level.
Step 3: Project Windows, Doors, and Openings
Using your floor plan and section drawings, project the positions of windows, doors, and all other openings onto your elevation. Refer to window and door schedule drawings for dimensions and details.
Step 4: Draw the Roof
Draw the roof, representing rooflines, overhangs, and eaves. Show the pitch or slope of the roof. For gable or shed walls, determine the highest point of the wall below the roof using the roof slope. Include the actual thickness of the roof, including fascia or barge boards.
Step 5: Draw the Plinth Level
Draw the plinth level, including any stairs, steps, or balusters for accessing the ground floor. Show wall textures if required.
Step 6: Add Ground Level and Grid Lines
Draw a horizontal line to represent the natural ground level. Insert grid lines to help with orientation and dimensioning.
Step 7: Label and Dimension the Elevation
Insert extreme grid lines and add labels and dimensions. Focus on vertical height measurements, including:
- Plinth height
- Floor-to-ceiling height
- Overhang width
- Height of windows and doors above the finished floor level (FFL)
Include labels for additional information such as wall finish material, roof covering material, and flashing material.
Suppose you have a simple rectangular house with the following dimensions from the floor plan:
- Overall length: 10 metres
- Overall width: 8 metres
- Wall height: 3 metres
- One front door: 900 mm wide, 2100 mm high
- Two windows: 1200 mm wide, 1200 mm high each
Using a scale of 1:100:
-
Convert to scaled dimensions:
- Length: 10 m → 10 cm on drawing
- Width: 8 m → 8 cm on drawing
- Wall height: 3 m → 3 cm on drawing
- Door: 900 mm → 9 mm; 2100 mm → 21 mm
- Windows: 1200 mm → 12 mm each
-
Draw the building envelope:
- Draw a rectangle 10 cm wide × 3 cm high
- Draw the ground line below
-
Add openings:
- Place the door in the centre or as shown on the floor plan
- Place windows on either side of the door at appropriate heights
-
Add the roof:
- For a simple pitched roof, draw a triangle on top of the rectangle
-
Label and dimension:
- Add vertical dimensions showing heights
- Label materials if required
When drawing an elevation, ensure you include:
- All external walls and their heights
- Positions and sizes of all windows and doors
- Roof shape, slope, and overhangs
- Ground level and plinth level
- Any stairs, steps, or balusters
- Wall and roof finish materials (shown through symbols or labels)
- Vertical dimensions (heights)
- Elevation drawings show the vertical view of a building from a specific direction.
- They are labelled as front, rear, left, right, or by compass direction.
- Elevations are drawn to the same scale as floor plans (1:100 or 1:50).
- The drawing process involves projecting vertical lines from the floor plan, adding openings, drawing the roof, and adding dimensions and labels.
- Elevations provide information that cannot be obtained from floor plans, such as heights of windows, doors, and worktops.
In Tanzania, when a mason or artisan is building a house in a local area like Mwanza or Dodoma, they use elevation drawings to ensure windows and doors are placed at the correct heights and positions. For example, if a homeowner wants to build a small shop in town, the mason would draw the front elevation to show where the display window and entrance door will go, ensuring the building looks balanced and meets the client's needs before construction begins.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Prepare drawing tools
- Gather Materials
- Prepare drawing specifications
- Prepare formats and title blocks
- Choose a Scale
- Draw the baseline
- Outline the Building Shape
- Include Doors and Windows
- Detail roof structure
- Add textures and materials
- Label elements
- Indicate dimensions
Tathmini ya matokeo
Elevations are created as per engineering standards to provide a detailed representation of external views of a structure
Tathmini ya maarifa
Detailed knowledge of:
Method used: The student should explain the methods involved in drawing elevations
Principles: The student should explain the principles involved in drawing elevations
Theories: The student should explain:-
- Application of various geometrical lines
- Plane and solid geometry
- The application of various tools and equipment
- Building design
- Spatial
- Environmental design
Circumstantial knowledge: Detailed knowledge about:
- Safe handling of drawing instruments,
- Safe operation of drawing equipment
Swali
What does an elevation drawing primarily show?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado