Mada za sehemu hiiCarrying out physical building measurementsMada 1
- Carrying out physical building measurement
Carrying out Physical Building Measurement
Physical measurement in a building is the process of determining the dimensions and physical characteristics of a building and its components. This includes measuring walls, doors, windows, ceilings, and other built-in features. The measurements are taken directly from the existing building using various tools and instruments.
Physical measurement is necessary for producing as-built drawings, which are used for building maintenance, refurbishment, or when alterations to the building are required.
Different tools are used depending on the nature of the site, availability, time constraints, and required accuracy. The main tools include:
- Measuring tools: Tape measure, laser distance measurer, water hose (level pipe), straight timber board, pair of compasses
- Surveying instruments: Ranging poles, dumpy level
- Site preparation: Machete (panga) for clearing obstructions
- Marking and recording: Steel arrows, hammer, clipboard, pencil, paper, scientific calculator
Safety Equipment
Before taking measurements, always wear the following safety gear:
- Clear safety glasses
- Masks
- Helmets
- Gloves
Follow these steps carefully to ensure accurate measurements:
Step 1: Select the Building
Choose a simple building within your school compound, such as a toilet or store room. This building will be your measurement site.
Step 2: Establish a Reference Point
Select one corner of the building as your reference point and name it point A. All other measurements will be taken from this reference point.
Step 3: Sketch the Building Layout
Draw a rough sketch of the building layout in your notebook before taking measurements.
Step 4: Measure Wall Dimensions
Measure the length of each exterior wall and partition wall from corner to corner. Record these lengths accurately.
Step 5: Verify with Diagonals
Measure the interior space diagonals to verify that your wall length measurements are correct. The diagonal should match the calculated length from your wall measurements.
Step 6: Measure Openings and Wall Thickness
Measure the width of all doors, windows, and any other openings. Also measure the thickness of the building walls.
Step 7: Locate Built-in Fixtures
Find the positions of built-in fixtures such as cupboards, shelves, or sinks. Measure their dimensions and note their locations.
Step 8: Measure Exterior Elevations
Sketch the exterior building elevations and measure the height of all exterior walls, as well as the height of doors and windows.
Step 9: Measure Interior Heights
Sketch interior elevations and measure heights of interior doors and ceilings. Take ceiling height measurements at multiple points to account for any variations in level.
Step 10: Note Additional Details
Sketch interior elevations of all rooms and locate all visible objects. Note their condition and any relevant details.
Step 11: Sketch Details
Draw detail sketches of selected parts and a pictorial drawing of the building for complete documentation.
Step 12: Record All Information
Before leaving the site, ensure you have noted every necessary information including:
- Names of spaces (e.g., classroom, office)
- Materials used in each building component
- Any other relevant notes
Step 13: Clean and Store Tools
Clean all tools used and store them appropriately in their proper places.
Step 14: Keep Your Sketches
Do not throw away the sketches and information obtained from the site. You will need them for the next activities.
A student group measures a small store room at their school. They select corner A as their reference point. They measure:
- Front wall (A to B): 3.0 m
- Right wall (B to C): 2.5 m
- Back wall (C to D): 3.0 m
- Left wall (D to A): 2.5 m
- Door width: 0.9 m
- Door height: 2.1 m
- Wall thickness: 0.23 m
- Ceiling height: 2.8 m
They also measure the diagonal from corner A to corner C, which is approximately 3.9 m, verifying that their wall measurements are correct using the Pythagorean theorem: 3.02+2.52=9+6.25=15.25≈3.9 m.
- Always double-check your measurements
- Use a consistent reference point (corner A)
- Take measurements at multiple points where variations may occur
- Record measurements immediately in your notebook
- Use appropriate tools for different measurements
In Tanzania, physical building measurement skills are directly applied when a family wants to renovate or extend their house. For example, before constructing an additional room or repairing a damaged wall, a local builder (fundi) must first measure the existing structure accurately to determine how much materials are needed. If a homeowner in Mwanza wants to add a small shop space to their existing house, the fundi would measure the current walls, doors, and height to calculate the correct amount of cement, sand, bricks, and timber required, ensuring the extension matches the existing structure properly.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select tools
- Set out reference point
- Survey and sketch building layout
- Take measurements of the building on floor plan
- Sketch the elevations and sections
- Take measurements of building parts on elevations and sections
- Sketch detailed drawings of selected parts
- Measure levels using horse pipe
- Sketch 3D drawings of the building
- Store the tools
Tathmini ya matokeo
A Freehand drawn set of outline drawings that conform to set standards
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain different ways of:
- Performing Freehand sketching
- Conducting measurements
Principles: The student should explain the principles of:
- Triangulation used in measurement
- Measurement by using a horse water pipe
Theories: The student should explain:
- The importance of physical measurements
- Forms of measured drawings
- Stages in conducting measured works
- Types of surveys
- Principal adjustment methods
- Data collection
- Presentation of technical data Circumstantial Detailed knowledge about:
- Safety requirements
- Accurate measurement
Swali
What is physical measurement in a building?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado