Mada za sehemu hiiPreparing measured drawings and documentationMada 3
- Preparing documentation of measured work
- Preparing as-built drawings
- Archiving as-built drawings
As-built drawings are detailed documents prepared for an already constructed building. Unlike design drawings that show how a building was planned, as-built drawings show the actual dimensions, materials, and conditions of the finished building and all its components. These drawings are essential for building maintenance, renovations, alterations, and general property management.
As-built drawings serve several important purposes:
- They provide an accurate record of the building as it was actually constructed
- They help facility managers maintain and repair the building
- They are needed when planning renovations or alterations
- They serve as legal documentation of the building's condition
- They assist in insurance claims and property valuations
Step 1: Collect Source Information
Before drawing, gather all available source materials:
- Original building design drawings
- On-site measurement documents from your earlier work
- Photographs of the building
- Any maintenance records or manuals
Review these materials to identify any modifications that were made during construction. Note any differences between the original design and the actual building.
Step 2: Select Your Tools
For manual drawing at Form 2 level, you will need:
- Drawing paper
- Drawing board
- T-square
- Set squares (45° and 30°/60°)
- Scale rule (1:50, 1:100)
- Clutch pencil or pencil (2H for construction lines, HB for final lines)
- Lettering stencils
- Drawing pens
- Pencil sharpener
- Eraser
- Clipboard
Step 3: Choose the Appropriate Scale
Select a scale based on the building size and detail required:
- 1:50 – For large-scale detail work
- 1:100 – For standard floor plans and elevations
- 1:200 or 1:250 – For site layout plans
Step 4: Prepare the Paper Layout
Before drawing, prepare your paper:
- Secure the drawing paper to your board
- Prepare the title block in the bottom right corner
- Include: project name, drawing title, scale, date, and your name
Step 5: Draw the Site Layout
Start with the site layout plan:
- Draw the plot boundaries to scale
- Show the building's position on the plot
- Include adjacent roads, paths, and landscape features
- Add the north arrow
- Indicate setbacks from boundaries
Step 6: Draw Floor Plans
Draw the floor plans following this sequence:
- Draw exterior walls using thick continuous lines
- Draw interior partition walls
- Add doors and windows, indicating swing direction
- Show built-in fixtures and fittings
- Label all rooms
- Add dimensions (both exterior and interior)
- Indicate materials using appropriate hatching
Step 7: Draw Building Elevations
Prepare exterior elevations for all visible sides:
- Front elevation
- Back (rear) elevation
- Left side elevation
- Right side elevation
For each elevation, show:
- Window positions and sizes
- Door positions
- Roofline and eaves
- Wall materials and finishes
- Ground level line
Step 8: Draw Building Sections
Create at least one section through the building:
- Show roof height and pitch
- Indicate ceiling heights
- Show floor levels and any changes in level
- Include foundation details
- Label all materials from top to bottom
Step 9: Add Details, Annotations, and Notes
Complete your drawings by adding:
- Detailed drawings of special components
- Notes on materials used
- Information about building services (electrical, plumbing positions)
- Reference to any specific features
A student has measured a simple toilet building in the school compound. The measurements obtained show:
- Overall length: 3.0 m
- Overall width: 2.0 m
- Wall height: 2.4 m
- Door size: 0.9 m × 2.1 m
- Window size: 0.6 m × 0.6 m
To prepare the as-built drawings:
-
Choose scale 1:50 (suitable for a small building)
-
Title block: Write "As-Built Drawing – School Toilet Block" and "Scale 1:50"
-
Site layout: Draw a 30 m × 25 m plot (scaled 1:200), place the 3 m × 2 m building in the centre, show the entrance path and north arrow
-
Floor plan: Draw exterior walls 150 mm thick, add the door opening on one wall, add the window on the opposite wall, label the rooms (WC and Washroom)
-
Elevation: Draw the front view showing door, window, and roof overhang
-
Section: Draw a cross-section showing foundation depth, wall height, and roof structure
-
Annotate: Add notes such as "Walls – 230 mm sand-cement blocks", "Roof – Corrugated iron sheets", "Floor – Concrete screed"
- As-built drawings show what was actually built, not what was designed
- Always compare your measurements with original designs and note any differences
- Use appropriate scales for different drawing types
- Include all necessary annotations, labels, and dimensions
- Ensure your title block is complete and professional
- Keep your drawings clean and accurate
In Tanzania, as-built drawings are essential when renovating old school buildings, government offices, or commercial buildings. For example, if a shop owner in Arusha wants to add a new toilet to their building, they would need as-built drawings of the existing structure to plan the plumbing connections and ensure the new construction doesn't damage existing foundations. Similarly, property managers use as-built drawings to plan maintenance work and order correct replacement parts for doors, windows, or roofing materials.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Collect original design of the building
- Select tools
- Calculate the dimensions
- Decide the scale to be used
- Prepare drawing paper format and layout
- Draw the site layout plan
- Draw floor plans as per dimensions
- Draw the elevations
- Draw building sections
- Prepare detailed drawings for selected elements
- Ink the drawings
Tathmini ya matokeo
Traced drawings with all dimensions drawn conform to required standards
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain methods involved in the:
- Production of measured drawings (“as built” drawing)
- Preparation of documentation
Principles: The student should explain the principles involved in:
- Production of as-built drawings
Theories: The student should explain:
- Types of measured drawings
- Scale and determination
- Dimensioning techniques
- Inking techniques
- Interpretation of drawings
- Types of storage drawings Circumstantial Detailed knowledge about:
- Neatness of the drawings
- Accuracy
Swali
What is the primary purpose of preparing as-built drawings?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado