Mada za sehemu hiiPreparing services drawings and layoutsMada 3
- Preparing mechanical services drawings
- Preparing electrical drawings
- Preparing plumbing drawings
Mechanical services drawings show the location and arrangement of mechanical systems like heating, ventilation, and air conditioning (HVAC) in a building. These drawings are prepared using CAD software to ensure accuracy and easy editing. In this topic, you will learn how to prepare mechanical services drawings by following a systematic procedure.
Mechanical services are building systems that provide comfort, safety, and efficiency to building occupants. They include:
- Heating, Ventilation, and Air Conditioning (HVAC): Regulates temperature, air quality, and airflow through heating units, ventilation fans, and air conditioning systems like chillers and split units.
- Fire Protection: Includes sprinklers, smoke extraction systems, and fire dampers that ensure safety during fire incidents.
- Vertical Circulation: Elevators and escalators that provide movement between floors.
These systems are essential because they create a comfortable indoor environment and protect people and property.
Follow these steps to prepare mechanical services drawings using CAD software:
Step 1: Adopt the Architectural Floor Plan
Obtain an architectural floor plan of the building showing all exterior and interior walls, windows, and doors. Clean the drawing by freezing or hiding unwanted layers. Scale the drawing if necessary to fit your working area.
Step 2: Place Mechanical Components
Place the indoor and outdoor units of the air conditioning system on the floor plan:
- Indoor unit (Wall-mounted fan evaporating unit): Located inside the building on walls.
- Outdoor unit (Air-cooled condensing unit): Located outside the building.
Use appropriate symbols from the CAD software library or standard symbols to represent these components.
Step 3: Draw Pipe Routes
Draw routes for two types of pipes:
- Refrigerant copper pipes: Carry refrigerant between the indoor unit and the outdoor unit. These pipes connect the cooling system components.
- Condensate drainage pipes: Remove water (condensation) from the indoor unit to outside the building.
Use appropriate line types and colors to distinguish between these pipe systems.
Step 4: Add Equipment Schedule
Create a schedule (table) that provides details of all air conditioning equipment used in the drawing. The schedule should include:
| Item | Description | Capacity (KW) | Quantity | Power Input (KW) | Voltage | Phase |
|---|---|---|---|---|---|---|
| 1 | Wall-mounted fan evaporating unit | 3.5 | 1 | 0.016 | 220-240V | 1 |
| 2 | Air-cooled condensing unit | 3.5 | 1 | 1.25 | 220-240V | 1 |
This helps contractors and engineers select the correct equipment during construction.
Step 5: Add Legend
Include a legend that explains all symbols, abbreviations, and notations used in the drawing. For example:
| Symbol | Description |
|---|---|
| Wall-mounted fan evaporating unit | |
| Air-cooled condensing unit | |
| Refrigerant copper pipes | |
| Condensate drainage pipes |
The legend helps anyone reading the drawing understand the symbols correctly.
Step 6: Prepare General Notes
Add general notes that provide important instructions applicable to the entire drawing set. These may include:
- Installation must be carried out by an approved contractor following relevant standards.
- Protective sleeves must be provided where pipes pass through walls and slabs.
- Refrigerant pipes shall be insulated with chemical cross-linked foam polyethylene.
- Condensate drainage pipes shall be UPVC and insulated with at least 6 mm thickness.
- Electrical installation must comply with IEE wiring regulations and Tanzania government laws.
- Ducts should be constructed from gauge 22 galvanised mild steel.
Step 7: Save and Export
Save your CAD drawing regularly to prevent data loss. Export the drawing as a PDF document ready for printing or sharing. Remember to follow computer safety procedures before shutting down.
A classroom in a Tanzanian secondary school needs an air conditioning system. Using CAD software, the draughtsperson:
- Adopted the classroom floor plan showing walls, doors, and windows.
- Placed one wall-mounted fan evaporating unit (FEU-WM) on the interior wall.
- Placed one air-cooled condensing unit outside the classroom near a window.
- Drew refrigerant copper pipes connecting the indoor and outdoor units through the wall.
- Drew condensate drainage pipes running from the indoor unit to an outside drain.
- Added an equipment schedule showing the 3.5 kW capacity units.
- Added a legend explaining all symbols.
- Added general notes specifying that installation must follow manufacturer specifications and relevant standards.
This drawing helps the contractor understand exactly where to install the AC units and pipes.
- Mechanical services include HVAC, fire protection, and vertical circulation systems.
- Preparing mechanical services drawings involves adopting an architectural plan, placing components, drawing pipe routes, adding schedules, legends, and general notes.
- Using CAD software allows for easy editing, accurate drawings, and digital storage.
- Always include legends and general notes to make drawings clear and professional.
In Tanzania, when constructing a new office building in Dar es Salaam, architects and engineers prepare mechanical services drawings using CAD software to show where air conditioning units, pipes, and fire protection systems will be installed. These drawings help contractors order correct materials, such as the right size of refrigerant copper pipes and AC units with appropriate capacity (e.g., 3.5 kW or 5.3 kW), and ensure the building meets safety standards required by local authorities.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Review architectural plans to identify mechanical needs
- Determine heating, cooling, and ventilation requirements based on building usage and standards
- Set up workspace
- Take the labelled architectural plans (e.g., bathrooms)
- Draw supply and return air ducts, exhaust ducts, and fresh air intake paths
- Mark terminal points such as grilles, diffusers, and registers
- Show locations for air handling units (AHUs), fan coil units (FCUs), exhaust fans, and chillers
- Show ventilation paths for exhaust and fresh air systems
- Indicate airflow direction using arrows and add flow rates where necessary
- Ensure compliance with standards for air changes per hour (ACH) in specific rooms
- Label ducts and pipes with sizes, materials, and insulation requirements
- Add symbols for mechanical components (e.g., fans, dampers, valves, etc.).
- Specify equipment details, such as capacities and performance data
- Add legends and schedules for ducts, pipes, and equipment
- Save the drawing and shut down the computer
Tathmini ya matokeo
Mechanical services drawings are well-prepared as per specified standards
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain the methods involved in preparing mechanical services drawings
Principles: The student should explain the principles of:
- Preparing mechanical services drawings
Theories: The student should explain:
- The use of different CAD commands
- The procedure of preparing mechanical services drawings
- Information shown in the mechanical services drawings Detailed knowledge about:
- Proper handling of computer
- Printing of drawings
- Storage of drawings (both digital and physical storage)
Swali
What is the first step in preparing mechanical services drawings using CAD software?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado