Mada za sehemu hiiPreparing services drawings and layoutsMada 3
- Preparing mechanical services drawings
- Preparing electrical drawings
- Preparing plumbing drawings
Preparing Electrical Drawings Using CAD Software
Electrical services drawings are plans that show the position of all electrical accessories, wiring, and power distribution points in a building. These drawings are essential for electrical installation works, applying for power connections, and quantifying the materials needed for the installation. In this topic, you will learn how to prepare electrical installation layouts using CAD software, following standard procedures and conventional symbols.
Using CAD software to prepare electrical drawings offers several advantages over manual drawing. CAD software provides built-in electrical symbols that can be inserted quickly, saving time. Drawings can be easily edited when changes are needed, and files can be stored digitally and shared through softcopies. The software also allows for precise layering of different electrical components, making complex drawings organized and readable.
Follow these eight steps to prepare an electrical installation layout using CAD software:
Step 1: Adopt and Prepare the Architectural Floor Plan
Start by obtaining the architectural floor plan of the building. This plan shows all exterior and interior walls, doors, windows, and room layouts. Clean the drawing by freezing or hiding unwanted layers, leaving only the structural elements needed for the electrical plan. Scale the drawing if required to ensure accurate proportions.
Step 2: Place Electrical Fixtures
Place lights, fans, and switches in each room according to electrical requirements. For example, a bedroom may need one ceiling light, one fan, and two switches (one for the light and one for the fan). A sitting room may require multiple light points, a ceiling fan, and several switch positions. Group these components together in the drawing to form a lighting circuit.
Step 3: Connect Fittings and Switches
Use appropriate line commands to connect the switches with their corresponding light fixtures. These lines show the flow of electrical power from the switch to the light. For clarity, use thin lines to represent wiring connections.
Step 4: Assign Circuit Numbers
Assign names or addresses to each component to form circuits from the distribution board (DB). The distribution board contains Miniature Circuit Breakers (MCBs) that protect each circuit. For example:
- Bedroom → Circuit A-1 (connected to MCB 1 in DB-A)
- Sitting room → Circuit A-2
- Kitchen sockets → Circuit A-3
- Cooker control → Circuit A-4
Each circuit is protected by its own MCB, making it easier to identify and isolate faults.
Step 5: Show Socket and Distribution Board Positions
Place symbols for socket outlets and the main distribution board on the floor plan. Socket outlets are typically placed 450mm above finished floor level (AFFL), while distribution boards are mounted at 1800mm AFFL. These components are classified as power elements and together form the power layout.
Step 6: Draw the Distribution Board Layout
Draw a detailed distribution board layout showing:
- Incoming power supply
- Main circuit breaker
- Individual circuit breakers (MCBs)
- Bus bars for internal power distribution
- Earthing and neutral connections
This layout shows how power is divided from the main supply into individual circuits throughout the building.
Step 7: Add a Legend
Include a legend that explains all symbols, abbreviations, and notations used in the drawings. The legend helps anyone reading the drawing to understand the meaning of each symbol.
Common Electrical Symbols
| Symbol | Description | Mounting Height |
|---|---|---|
| ☐ | Distribution board (DB) | 1800mm AFFL |
| ⊙ | 13A twin-switched socket | 450mm AFFL |
| ○ | Light point (LED bulkhead) | Ceiling mounted |
| — | 10A 1-way switch | 1400mm AFFL |
| ═ | 10A 2-way switch | 1400mm AFFL |
| 🔒 | Cooker isolator (45A) | 250mm AFFL |
Step 8: Prepare General Notes
Add general notes that provide important instructions for the entire electrical installation. These notes specify standards and regulations that must be followed.
General Notes for Electrical Drawings
- All installations shall comply with IEE wiring regulations BS 7671:2018 (18th edition) and Tanzania government regulations.
- Internal wiring shall use PVC-insulated copper cables drawn into concealed conduits.
- Socket outlets shall be mounted at 450mm AFFL.
- Lighting switches shall be mounted at 1400mm AFFL.
- All MCBs and circuit breakers shall be clearly labeled with circuit numbers.
- The earth electrode resistance shall not exceed 0.5 ohms.
Step 9: List of Drawings
Prepare a list of drawings included in your electrical set. This list serves as an index for the drawing package.
| Drawing Number | Description |
|---|---|
| ELE/01 | List of drawings |
| ELE/02 | General notes |
| ELE/03 | Legend and symbols |
| ELE/04 | Lighting points layout |
| ELE/05 | Connection of lighting points layout |
| ELE/06 | Power points layout |
| ELE/07 | Distribution boards layout |
Consider a simple single-bedroom house plan. The electrical layout would include:
- Living room: One 12W recessed downlight (circuit A-1), one 10A switch at 1400mm AFFL
- Bedroom: One 5W LED bulkhead (circuit A-2), one ceiling fan connected to circuit A-3, one 10A switch
- Kitchen: One 13A twin socket outlet (circuit A-4), one 45A cooker isolator (circuit A-5)
- Bathroom: One 5W LED bulkhead (circuit A-2), one 10A switch
The distribution board (DB-A) would be placed near the entrance at 1800mm AFFL, containing 6 MCBs protecting each circuit.
After completing the drawings, save your work in both the native CAD format and as a PDF for printing. Remember to save regularly during the drawing process to prevent loss if the computer malfunctions. Many CAD software include auto-save features, but manual saving remains important.
Preparing electrical drawings using CAD software involves adopting an architectural floor plan, placing electrical fixtures, connecting switches to lights, assigning circuit numbers, positioning sockets and distribution boards, drawing the distribution board layout, adding a legend, and preparing general notes. By following these steps and using standard symbols, you can produce clear and professional electrical installation drawings that comply with regulations.
In Tanzania, when building a new house in areas like Mikocheni or Buguruni, a student trained in electrical CAD drawing could help the house owner prepare electrical installation plans for submission to Tanzania Electricity Supply Company (TANESCO) when applying for a new electricity connection. The drawings would show where to place wiring, sockets, and the distribution board, helping the electrician understand the layout before starting work and ensuring the installation meets safety standards required by the Ministry of Energy.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Review architectural plans to identify electrical needs (e.g. lighting, sockets, and appliances) Set up workspace
- Take the labelled architectural plans
- Mark light fixture positions on ceilings or walls
- Indicate socket outlets, switches, and equipment requiring power
- Show the location of the main distribution board (DB), sub-panels, and cable routes.
- Draw wiring routes for lighting and power circuits
- Use different line types for single-phase, three-phase, or data cables
- Label circuits (e.g. "Circuit 1 – Lighting," "Circuit 2 – Sockets")
- Include cable sizes, conduit types, and breaker ratings
- Overlay electrical drawings with other services to check for conflicts
- Add labels, dimensions, and a legend for symbols
- Save the drawing and shut down the computer
Tathmini ya matokeo
Electrical services drawings are prepared as per specified standards
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain the methods involved in preparing electrical services drawings
Principles: The student should explain the principles of:
- Preparing electrical services drawings
Theories: The student should explain:
- The use of different CAD commands
- The procedure of preparing electrical services drawings
- Information shown in the electrical services drawings Detailed knowledge about:
- Proper handling of computer
- Printing of drawings
- Storage of drawings (both digital and physical storage)
Swali
What is the standard mounting height for a 13A twin-switched socket outlet in an electrical drawing?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado