Mada za sehemu hiiConstructing complex furnitureMada 4
- Making armed and shaped chairs
- Making shaped table
- Making upholstered chair
- Making kitchen cabinet and cupboard
An upholstered armchair is a comfortable seating furniture piece with armrests mounted on the sides. It is designed for single-person seating and is commonly used in living rooms, offices, and lounges for relaxation. Unlike basic chairs, upholstered armchairs require additional skills in cushioning and fabric covering to provide comfort.
An armchair consists of several essential components:
- Seat base: The horizontal platform where the sitter places their weight
- Backrest: Provides support for the back and typically stands 20–24 inches (510–610mm) high
- Armrests: Mounted on both sides, usually 25–28 inches (640–710mm) high and 5–8 inches (130–200mm) wide
- Legs: Support the entire structure, typically 15–20cm tall (four pieces required)
- Cushioning: Foam padding (3–5cm thick high-density foam) for seat and back comfort
- Upholstery fabric: Durable fabric (cotton or polyester) that covers the cushioning
When making an armchair, follow these standard British Standard measurements:
| Component | Measurement |
|---|---|
| Overall height | 36–40 inches (910–1020mm) |
| Seat height | 18–20 inches (460–510mm) |
| Seat width | 22–28 inches (560–710mm) |
| Seat depth | 18–22 inches (450–560mm) |
| Armrest height | 25–28 inches (640–710mm) |
| Backrest height | 20–24 inches (510–610mm) |
Prepare the following before starting:
- Wood: Hardwoods, softwoods, or plywood for the frame
- Wood glue: For joining wood pieces securely
- Screws/nails or dowels: For fastening components
- Joint types: Mortise and tenon or dovetail joints for strength
- Sandpaper: Various grits (80–220) for smoothing surfaces
- Wood stain, paint, varnish, or oil: For finishing
- Wood filler: To fill any gaps or imperfections
- Cushioning: 3–5cm thick high-density foam
- Fabric: 2–3 meters of durable cotton or polyester fabric
Ensure these tools are available:
- Measuring tape, T-square, pencil
- Tenon saw, hand saw, circular saw
- Bench planes, belt sander, thickness planer
- Chisel, mallet, hammer
- Brace/hand drill
- Staple gun (for fabric attachment)
- Safety gear: Overall, safety boots, mask, safety glasses
Step 1: Preparation
Gather and prepare all materials. Cut the wood to the following sizes:
- Seat: 50cm × 45cm (one piece)
- Backrest: 50cm × 45cm (one piece)
- Legs: 15–20cm tall (four pieces)
- Armrests: 25cm tall × 50cm long (two pieces)
Step 2: Sketching and Planning
- Sketch the chair design on paper
- Label all measurements on the sketch
- Produce shop drawings showing all cut and assembly dimensions
Step 3: Cutting the Wood
- Use the shop drawings as a guide
- Cut wood to planned sizes using appropriate saws
- Sand all pieces to produce a smooth surface
Step 4: Assembling the Frame
- Attach the four legs to the seat base
- Fix the backrest at a slight angle for comfort
- Attach the armrests on both sides
- Check that the chair does not wobble—ensure all joints are secure
Step 5: Adding Cushioning and Upholstery
- Cut foam to fit the seat and backrest dimensions
- Wrap the foam with fabric, ensuring smooth coverage
- Staple the fabric underneath, starting from the center and working outward
- Stretch firmly to avoid wrinkles
- Trim excess fabric with scissors
Step 6: Finishing
- Apply wood stain, paint, varnish, or oil to the wooden frame
- Add decorative elements such as nails or buttons as per the design
- Allow all finishes to dry completely before use
Step 7: Cleanup
- Clean the working area
- Store tools properly for future use
A student needs to cover an armchair seat cushion measuring 50cm × 45cm with fabric.
Calculation:
- Cushion area = 50cm × 45cm = 2,250 cm²
- Add 10cm on each side for wrapping and stapling:
- Length needed = 50cm + 20cm = 70cm
- Width needed = 45cm + 20cm = 65cm
- Total fabric piece = 70cm × 65cm = 4,550 cm²
For both seat and backrest (each 50cm × 45cm), the student should purchase at least 2–3 meters of fabric to allow for pattern matching and errors.
In Tanzania, skills in making upholstered armchairs are valuable for small woodworking businesses. For example, a craftsman in Arusha can make custom armchairs for local hotels or restaurants, charging between TZS 150,000 to TZS 300,000 per chair depending on materials used. This provides income opportunities and addresses local demand for comfortable seating in homes and commercial spaces.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Draw furniture
- Interpret drawings
- Calculate materials required
- Select tools and materials
- Prepare members
- Set out members
- Make joints
- Assemble members
- Perform general finishing
- Apply finishes
- Clean work place tools and machines
- Store tools at safe place
- Store furniture at safe place
Tathmini ya matokeo
upholstered chair conforms to drawing and technical specifications
Tathmini ya maarifa
Detailed knowledge of:
Method used: The students should describe how to make upholstered chair
Principles: The student should state principles related to making upholstered chair
Theories: The students should state the uses of upholstered chairs
Circumstantial knowledge: Workshop safety rules and regulations
Swali
What is the standard height range for the backrest of an upholstered armchair according to the British Standard measurements?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado