Mada za sehemu hiiPerforming wood turningMada 2
- Performing face plate
- Performing spindle turning
Performing Face Plate
Faceplate turning is a woodworking technique used on a lathe machine to create flat, wide objects such as bowls, platters, and stool seats. In this technique, the wood blank is mounted so that its flat face is perpendicular to the lathe's rotational axis, and the cutting tool moves across the face of the spinning wood to shape it. Unlike spindle turning where the wood grain runs parallel to the lathe bed, in faceplate turning the grain runs perpendicular to the lathe bed.
The Faceplate
A faceplate is a circular metal plate that attaches to the headstock of the lathe. It has mounting holes or slots that allow you to secure the wood blank directly to it using screws. Faceplates come in standard sizes: 3 inches, 6 inches, 8 inches, and 10 inches. Larger faceplates can hold bigger workpieces, while smaller ones are used for smaller projects.
Other Mounting Equipment
- Drive centre: Fits into the headstock to drive the rotation
- Tail centre: Provides support at the far end of the workpiece
- Scroll chuck: An alternative mounting method that grips the wood securely
Step 1: Prepare the Wood Blank
Select a suitable wood piece for your project. For a stool seat, you would typically use a round blank of about 250 mm diameter and 38 mm thickness. Mark the centre clearly on the face of the blank.
Step 2: Attach the Blank to the Faceplate
Place the blank against the faceplate and secure it with screws through the mounting holes. The screws must go through the faceplate into the wood blank to hold it firmly. Ensure the blank is centred properly before tightening all screws.
Step 3: Set Up the Lathe
Mount the faceplate onto the lathe headstock. Adjust the tool rest so it is close to the workpiece—within 3 mm is recommended—and set it to the correct height, usually level with the centre of the workpiece. Ensure the lathe speed is appropriate for the size of the blank.
Step 4: Perform the Turning
Using appropriate turning chisels such as a bowl gouge or facing chisel, move the cutting tool perpendicular to the rotational axis of the workpiece. This creates the flat surface characteristic of faceplate turning. For a stool seat:
- First, define the turning boundary by scribing a circle around the centre
- Use a bowl gouge to shape the seat from the circle edge toward the centre
- Dish the centre to create a slight concave shape for comfort
- Sand the surface while the workpiece is still mounted
Step 5: Finish and Remove
Once the shaping is complete, sand the surface to a smooth finish while the wood is still spinning. Apply your chosen finish. Then stop the lathe and carefully remove the workpiece.
When performing faceplate turning, always follow these safety rules:
- Wear appropriate PPE: safety glasses, dust mask, safety boots, and a cap
- Remove rings and watches, and roll sleeves above elbows
- Always stand to one side when switching the lathe on
- Check that the workpiece rotates freely before starting
- Ensure the tool rest is adjusted close to the workpiece
- Switch off the lathe before checking job size or making adjustments
- Keep the workshop neat and free of loose wood scraps
A student needs to make a round stool seat with a finished diameter of 190 mm from a 250 mm blank. Here is how to proceed:
- Mark the centre of the blank on the face side
- Set compass to 95 mm (half of 190 mm) and scribe a circle around the centre to define the turning boundary
- Mark leg positions at 45° angles from the centre using a protractor and sliding bevel
- Drill centre hole for the chuck screw (20 mm deep) and angled holes for leg attachments
- Mount on lathe and turn from the circle boundary toward the centre
- Dish the centre to create a comfortable sitting surface
- Sand and finish while the seat is still mounted
This process follows the faceplate turning technique to create a functional furniture piece.
In Tanzania, skilled woodturners use faceplate turning to produce locally valued items such as stool seats, bowls, and decorative platters that are sold in markets like Mwenge in Dar es Salaam or in small workshops across the country. A young craftsperson who masters faceplate turning can offer custom furniture repair services or create handmade items for sale, earning income using locally sourced timber like mvule or mninga.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Prepare drawing for wood turning
- Interpret drawings
- Calculate materials required
- Select tools and materials
- Prepare materials
- Fix work piece
- Perform turning
- Perform finishing
- Clean work place and tools
- Store work piece and tools at safe place
Tathmini ya matokeo
Face plate conforms to drawing and technical specifications
Tathmini ya maarifa
Detailed knowledge of:
Method used: The students should describe how to perform face plate
Principles: The student should state principles related to performing face plate
Theories: The students should explain uses of face plates
Circumstantial knowledge: Workshop safety rules and regulations
Swali
What type of wooden objects are primarily produced using faceplate turning?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado