Mada za sehemu hiiPerforming timber processingMada 2
- Logging timber
- Conversion of timber
Conversion of Timber
Timber conversion is the process of sawing a log into square-edged pieces of timber suitable for carpenters, joiners, and cabinet makers. The logs are cut into usable planks or boards of commercial sizes. When sawing a log, workers consider the size of the taper (the gradual narrowing of the log) to get the maximum amount of quality timber from each log.
There are three common methods used to convert logs into square-edged boards and timbers. Each method has its own advantages and disadvantages.
1. Live Sawing (Through and Through Sawing)
This is the simplest and most economical method. The log is cut into boards by making a series of parallel saw cuts, similar to a large jigsaw in timber mills.
Advantages:
- Little waste of timber
- Logs do not need to be returned for re-cutting
- Lower milling costs
- Suitable for rapid mass production of boards for light framing
Disadvantages:
- The timber produced may warp more easily
- Not ideal for high-quality hardwood work
2. Quarter or Radial Sawing
In this method, the saw cuts are made parallel to the medullary rays (the thin strips of cells running from the center of the tree). See Figure 2.4 in your textbook.
Advantages:
- The cut section shrinks at a uniform rate
- Less warping of the timber
- Produces high-quality timber suitable for fine woodworking
Disadvantages:
- More wastage of wood
- Takes longer time for conversion
3. Back or Tangential Sawing
The sawing is done at right angles to the medullary rays and tangential to the annual rings. The log must be turned frequently to produce the tangential cut.
Advantages:
- Allows sawing around faulty parts of the log
- Can separate sapwood from heartwood with minimum waste
- Suitable for producing wide boards
Disadvantages:
- Sections cut become weaker because the medullary rays are cut
- Requires frequent repositioning of the log
- More labor-intensive
A carpenter in Arusha received a log with a diameter of 60 cm. Using live sawing, he needs to produce boards that are 5 cm thick.
Question: How many parallel cuts are needed to produce boards from this log?
Solution: When using live sawing, the number of cuts depends on the required board thickness. If each board is 5 cm thick and we need boards from both sides of the log:
Number of cuts = (Total diameter ÷ board thickness) - 1 = (60 ÷ 5) - 1 = 12 - 1 = 11 parallel cuts
This produces 12 boards, each 5 cm thick.
The choice of conversion method depends on several factors:
- Type of timber: Hardwoods are often converted using quarter sawing for better quality
- Size and quality of the log: Smaller logs may use live sawing for efficiency
- Market requirements: Different markets demand different board sizes and quality
- Shrinkage considerations: Some methods reduce warping and shrinkage problems
When performing timber conversion, always observe the following safety measures:
- Wear safety boots and gloves
- Use overalls and dust masks
- Ensure proper ventilation in the working area
- Keep the workspace clean using brooms and dust covers
- Check moisture content using a moisture meter before and after cutting
In Tanzania, timber conversion is commonly practiced at sawmills in regions like Morogoro, Kilimanjaro, and Lindi, where local carpenters and furniture makers purchase converted timber for their workshops. For example, a furniture maker in Dar es Salaam buying timber from a local sawmill would need to understand conversion methods to select appropriate boards for making doors, window frames, or furniture — choosing quarter-sawn timber for high-quality items that resist warping, or live-sawn timber for budget-friendly construction materials. This knowledge helps them make informed purchasing decisions and produce durable woodwork for homes and businesses across Tanzania.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Prepare tools and materials
- Preserve timbers
- Dry timbers
- Store timbers
- Clean work place
- Store tools
Tathmini ya matokeo
Timber converted as per industry standards and methods
Tathmini ya maarifa
Detailed knowledge of:
Method used: The student should be able to explain methods related to logging timber
Principles: The student should explain principles related to conversion timber
Theories: The students should explain theories related to conversion timber
Circumstantial knowledge: The students should explain detailed knowledge related to conversion timber
Swali
What is timber conversion?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado