Mada za sehemu hiiPerforming timber treatmentMada 2
- Timber seasoning
- Timbering treatment
Timber seasoning is the process of reducing the moisture content in timber to make it suitable for use in woodworking. When timber is freshly cut, it contains a lot of water (sap). This water must be removed so that the timber becomes stronger, lighter, and more stable for carpentry work.
The amount of moisture in timber is called the Moisture Content (MC). It is calculated as a percentage using the formula:
MC%=(mdrymwet−mdry)×100
Where:
- mwet = weight of timber when freshly cut (wet weight)
- mdry = weight of timber after drying completely (dry weight)
Worked Example: A piece of freshly cut timber weighs 8 kg. After proper drying, it weighs 6.5 kg. Calculate its moisture content.
Solution: MC%=(6.58−6.5)×100=(6.51.5)×100=23.1%
This timber still needs seasoning because the desired moisture content for use is about 15%.
- To enhance the engineering properties of timber for construction
- To reduce shrinkage and prevent deformities like warping, cracking, and twisting
- To make timber stronger — strength increases by up to 50% when moisture is reduced to 15%
- To reduce weight — timber can become 35% lighter after seasoning
- To make timber more workable for cutting, joining, and finishing
- To prevent decay and fungal attack (timber is safe when moisture is below 20%)
Natural Seasoning
Natural seasoning uses air and water to dry timber slowly. It takes several weeks or months.
Types of Natural Seasoning:
-
Water Seasoning: Timber is immersed in flowing water for 2–4 weeks. The water removes the sap from the timber. After this, the timber is dried in the air.
-
Air Seasoning: Timber logs are stacked in the open air with gaps between them for ventilation. The stack is placed on a platform about 30 cm above the ground. This method takes several months.
Advantages of Natural Seasoning:
- Economical (low cost)
- Simple process
- Produces good quality timber
- No special equipment needed
Disadvantages of Natural Seasoning:
- Takes a long time
- Requires large open space
- Timber can be damaged by fungi and insects during stacking
- Uneven drying may occur
Artificial Seasoning
Artificial seasoning uses machines and special conditions to dry timber quickly. It takes days or weeks instead of months.
Types of Artificial Seasoning:
-
Boiling Seasoning: Timber is boiled in water for 3–4 hours, then dried. This method is not suitable for large quantities.
-
Kiln Seasoning: Timber is placed in a closed chamber (kiln). Hot air is passed through the chamber to remove moisture. Temperature and humidity are controlled.
-
Chemical Seasoning: Timber is treated with salt solution, which absorbs water quickly and speeds up drying.
-
Electrical Seasoning: High-frequency electric current is passed through timber. The electrical resistance is measured, and when it reaches a certain level, the timber is considered dry. This is also called rapid seasoning.
Advantages of Artificial Seasoning:
- Very fast — takes days instead of months
- Can be done in any weather, including rainy seasons
- Controlled environment produces uniform results
- Suitable for areas with limited space
Disadvantages of Artificial Seasoning:
- Expensive — requires special equipment and fuel
- Needs skilled supervision
- Not economical for large quantities of timber
- May cause cracking if not properly controlled
In Tanzania, carpenters at local markets like Mwanza or Arusha use timber seasoning knowledge when purchasing wood for furniture making. For example, before buying sawn timber at a local sawmill, a carpenter checks whether it has been properly seasoned — if not, the timber may warp or crack after being used to build chairs or tables, causing loss of money. Properly seasoned timber lasts longer and gives better results for carpentry work.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Prepare tools and materials
- Preserve timbers
- Dry timbers
- Store timbers
- Clean work place
- Store tools
Tathmini ya matokeo
Seasoned timber conforms to technical specifications
Tathmini ya maarifa
Detailed knowledge of:
Method used: The student should be able to explain methods related to timber seasoning
Principles: The student should be able to explain principles related to timber seasoning.
Theories: The students should explain theories related to timber seasoning
Circumstantial knowledge: The students should explain detailed knowledge related to timber seasoning
Swali
What is the purpose of timber seasoning?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado