Mada za sehemu hiiMaking corner framesMada 2
- Making notice board frames
- Making picture frames
Making Picture Frames
A picture frame is a decorative and protective border that surrounds and holds a photograph, artwork or other visual media. Its primary functions are to enhance the appearance of the item it holds, protect it from damage and make it easier to display on a wall.
Understanding the components of a picture frame helps you assemble it correctly:
- Frame – The outer border or structure, typically made of wood, metal, plastic or glass. It comes in various styles and finishes.
- Glass or acrylic – A transparent cover that protects the artwork or photograph from dust, dirt and physical damage.
- Mat or matting – A decorative border placed between the artwork and the frame. It adds visual interest and provides a contrasting background.
- Backing board – The rigid support behind the artwork that keeps it flat and secure within the frame, usually made of cardboard, plywood or hardboard.
- Hangers or fasteners – Devices attached to the back of the frame for hanging on a wall, such as hooks, wire or D-rings.
- Clips or tabs – Small metal or plastic fasteners inside the frame that hold the glass, artwork and backing board in place.
Before starting, gather the following:
Materials: Timber, plywood or hardboard (for backing), sandpaper, sanding sealer, thinner, clear glass, wood glue, nails or screws.
Tools and equipment: Measuring tape, pencil or marking knife, try square, hand saw or tenon saw, claw hammer, screwdriver, rebate plane, jack plane, chisel, hand drill, paintbrush, and workbench with vice.
Follow these steps in order:
Step 1: Prepare the Materials
Select appropriate timber and check for defects such as cracks, knots or warping. Determine the thickness and width of the frame pieces based on the required dimensions of the picture.
Step 2: Measure and Cut the Frame Pieces
Obtain the height and width of the required picture frame from working drawings or specifications. Measure carefully and cut the four pieces of wood to the required sizes—two vertical (height) pieces and two horizontal (width) pieces.
Step 3: Plane the Wood Surfaces
- Plane the face side to get a flat and straight surface.
- Plane the face edge to get the correct edge for width.
- Plane the wood for the required thickness.
Step 4: Rip to Width
Rip the wood to get the required width as specified in the working drawing.
Step 5: Set Out and Cut the Joint
Mark the mitre joint positions on the frame members. A mitre joint is a corner joint where two pieces are cut at a 45-degree angle to form a 90-degree corner. Use a try square to mark accurate lines.
Step 6: Test the Fit (Dry Assembly)
Assemble the frame pieces without glue or nails to check for fit. Ensure all corners meet properly and make any adjustments as needed.
Step 7: Cut Backing Board and Glass
Cut the plywood or hardboard for the rear side to fit inside the frame. Cut the clear glass to fit into the rebate of the frame.
Step 8: Sand All Pieces
Sand all pieces using sandpaper, starting with rough (course) grade and progressing to fine grade for a smooth finish.
Step 9: Assemble the Frame
Apply wood glue to the joints if required. Secure the frame with nails or screws, ensuring the mitre joints are tightly fitted.
Step 10: Check for Square
Use a try square to verify that the frame is perfectly square (all corners at 90 degrees).
Step 11: Apply Finishing
Fill any gaps, nail holes or imperfections with wood filler. Once dry, sand the frame smoothly. Apply undercoat paint or stain as desired and allow it to dry completely.
Step 12: Clean the Workplace
Clean the workshop and return all tools to their proper storage locations.
Suppose you need to make a picture frame for a photograph measuring 20 cm × 15 cm.
-
Determine frame dimensions: If the frame width is 3 cm, add 6 cm to each dimension (3 cm on each side). The frame pieces will be:
- Two vertical pieces: 20 cm + 6 cm = 26 cm long
- Two horizontal pieces: 15 cm + 6 cm = 21 cm long
-
Set out mitre joints: Each piece must be cut at 45 degrees at each end so that when joined, they form a perfect 90-degree corner.
-
Cut and assemble: Cut the four pieces to length with mitre ends, dry-fit to check gaps, then secure with glue and nails.
-
Finish: Sand, fill gaps with wood filler, apply paint, and attach hanging hardware to the back.
- Always wear Personal Protective Equipment (PPE): safety boots, gloves, and safety glasses when required.
- Use tools properly and for their intended purpose only.
- Keep your working area clean and organized to prevent accidents.
- Handle sharp tools like chisels and saws with care.
- Ensure good ventilation when applying paint or wood finishes.
In Tanzania, local carpenters and joiners commonly make picture frames for homes, offices, and shops. For example, a student could make a custom 30 cm × 40 cm frame using locally sourced pine timber to display a family photograph on a wall in their home. Small businesses in markets like Mwenge or Kariakoo sell handmade frames, and knowing how to construct them yourself can help you save money or start a small framing business in your community.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Interpret drawings
- Calculate materials required
- Select tools and materials
- Take correct measurements
- Prepare member to the specified measurements
- Set out corner joints
- Make joints
- Cut rebate
- Assemble the frame
- Apply finishes
- Clean the work area
- Store the frame and tools in a safe place
Tathmini ya matokeo
Picture frame conforms to drawings and technical specifications
Tathmini ya maarifa
Detailed knowledge of:
Method used: The student should be able to explain methods related to making picture frames
Principles: The student should be able to explain principles related to making picture frame
Theories: The students should explain theories related to making picture frames
Circumstantial knowledge: The students should explain detailed knowledge related to making picture frame
Swali
Which of the following is NOT a key component of a picture frame?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado