Mada za sehemu hiiConstructing resistive circuitsMada 4
- Building single resistor circuit
- Building series circuit
- Building parallel circuit
- Building series-parallel resistive circuit
A parallel circuit is a configuration where components are connected across common points, providing multiple paths for current to flow. This arrangement ensures that each component receives the same voltage while the total current divides among the different branches.
In a parallel connection, electrical components such as resistors are connected across common points, allowing multiple current paths. Each component connects directly to the voltage source, so the voltage across each branch is identical. This configuration is commonly used in household wiring because it allows each appliance to operate independently.
Voltage in Parallel Circuits
In a parallel circuit, all components experience the full voltage of the source. This means the voltage across each resistor is the same as the supply voltage.
VT=V1=V2=V3
For example, if a 24V battery powers three parallel resistors, each resistor has 24V across it.
Current in Parallel Circuits
The total current entering a parallel circuit equals the sum of the currents flowing through each individual branch.
IT=I1+I2+I3
If each branch draws 2.5A from a 24V source, the total current supplied is 7.5A.
Total Resistance in Parallel Circuits
Unlike series circuits where resistances add up, parallel resistance is calculated using reciprocals. The total resistance is always less than the smallest individual resistor.
RT1=R11+R21+R31+⋯+Rn1
Worked Example: Three resistors with values 4Ω, 6Ω, and 8Ω are connected in parallel. Find the total resistance.
Solution:
RT1=41+61+81
Finding a common denominator (24):
RT1=246+4+3=2413
Therefore:
RT=1324≈1.85Ω
The total resistance is approximately 1.85Ω, which is less than the smallest resistor (4Ω).
Failure Impact
In parallel circuits, if one component fails (such as a burned-out bulb), the other components continue operating normally. This is because each branch operates independently.
Brightness of Light Bulbs
When light bulbs are connected in parallel, adding more bulbs does not reduce their brightness. Each bulb receives the full source voltage, so all bulbs shine at their intended brightness.
Parallel connections are widely used in electrical installations. In homes and industries, different devices such as lamps, appliances, and sockets connect in parallel to a common voltage source. This ensures each device receives the full voltage and can operate independently. If one device fails, the others continue working, making parallel wiring the standard for safe and reliable electrical systems.

Required Tools and Materials
- Three resistors (different values)
- Breadboard for temporary circuit building
- Connecting wires (copper wire with low resistance)
- Variable DC power supply (0-30V)
- LED (light-emitting diode)
- Digital multimeter for measurements
- Safety gear: overalls and safety goggles
Safety Precautions
- Wear safety goggles and overalls at all times
- Ensure the power supply is off before making connections
- Check all connections before switching on the circuit
- Avoid short circuits by keeping wires properly separated
Implementation Steps
-
Prepare the circuit diagram — Draw or refer to a diagram showing resistors connected in parallel across the power supply.
-
Select resistors — Choose three resistors with known resistance values (for example, 10Ω, 20Ω, and 30Ω).
-
Connect to breadboard — Insert each resistor into a separate row on the breadboard, ensuring they share common positive and negative rails.
-
Wire the circuit — Connect wires from the positive terminal of the power supply to the common point and from the negative terminal to the other common point, creating parallel branches.
-
Test the circuit — Set the power supply to 6V DC and connect it. Each LED should light, demonstrating that each branch receives voltage independently.
-
Clean the workspace — After testing, switch off the power supply and organize all tools and materials.
Build a parallel resistor circuit with two resistors:
- Connect two resistors of different values in parallel
- Add an LED in series with each resistor branch
- Apply a 12V supply and observe that both LEDs light with full brightness
- Remove one resistor and observe that the remaining LED continues to work
Self-reflection questions:
- Using the colour code, determine the resistance values of your resistors and calculate total resistance
- If the applied voltage is 12V, calculate the current flowing through each branch
- What happens to the remaining LED when one resistor is removed from the parallel circuit?
In Tanzanian homes, electrical wiring follows the parallel circuit principle. When you connect a television, radio, and mobile phone charger to the same wall socket, each device operates independently at full voltage. If the television develops a fault and stops working, the radio and charger continue functioning normally because each appliance has its own separate current path through the parallel wiring system.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Design a circuit diagram of the parallel resistive circuit.
- Identify equipment, tools, and materials required.
- Prepare resistors and cables for termination.
- Build a parallel resistive circuit.
- Solder the built circuits.
- Apply safety precautions.
- Clean work area, tools and equipment.
- Store tools, equipment, and remaining materials
Tathmini ya matokeo
The parallel circuit is constructed as per electrical standards.
Tathmini ya maarifa
Knowledge evidence:
Methods used: The student should explain building a parallel resistor circuit.
Principles: The student should explain the principles related to building parallel resistor
Theories: The trainee should explain:
- Application of parallel circuit.
- Electrical symbols used to construct the resistive circuit.
Detailed knowledge about:
- Safe handling of work tools and equipment
- Electrical hazards.
Swali
In a parallel circuit, what is the relationship of voltage across each component?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado