Step 1: Mark and Measure
Using a steel rule and a try square, measure and mark the exact position where the branch pipe will join the run pipe. Ensure the marks are clear and accurate.
Step 2: Cut the Pipes
Use a hacksaw to cut the pipes according to the marked positions. After cutting, use a file or reamer to remove any burrs from the inside edges of the pipes. This ensures a proper fit.
Step 3: Prepare the Joint Faces
Clean the surfaces to be joined with a wire brush. Use a centre punch to make small indentations at the joint points — this helps the weld metal stick firmly to the base metal.
Step 4: Fit the Pipes Together
Place the branch pipe at a 90° angle to the run pipe to form the T-shape. Hold the pieces in position using a bench vice or clamping device. Check with a try square to ensure the joint is at a right angle.
Step 5: Weld the Joint
Set the welding machine to the appropriate current for the pipe thickness. Strike an arc and lay a weld bead around the joint, starting from the root of the joint and moving around the pipe. Use short, even strokes to create a strong weld.
Step 6: Clean the Weld
Allow the joint to cool naturally. Use a chipping hammer to remove slag, then finish with a wire brush. Inspect the weld for cracks, holes, or uneven areas.