Mada za sehemu hiiPerforming metal filingMada 3
- Performing draw filling
- Performing longitudinal filling
- Performing cross filling
Longitudinal filing is a hand filing technique used to remove metal from the surface of a workpiece by moving the file forward and backward along the length of the metal, following the natural grain direction of the material. This method produces smooth, flat surfaces and is commonly used in plumbing and pipe fitting to prepare metal surfaces for fitting, welding, or finishing.
The following tools are required when performing longitudinal filing:
- Hand file – the main tool with a rough surface (cutting teeth) used to remove metal
- Bench vice – secures the workpiece firmly in place during filing
- Tape measure – measures the dimensions of the workpiece before and after filing
- Hacksaw – may be used to cut the metal to the required size before filing
- Personal Protective Equipment (PPEs) – includes safety goggles, gloves, and safety shoes
Before and during longitudinal filing, always observe these safety rules:
- Wear safety goggles to protect eyes from metal filings
- Wear gloves to protect hands from sharp edges and rough file surfaces
- Secure the workpiece firmly in the bench vice to prevent it from moving or falling
- Ensure the file handle is clean and properly attached
- File in a direction away from your body
- Keep the work area clean and free of loose metal filings
- Remove any loose clothing or jewelry that could get caught in the file
Follow these steps to perform longitudinal filing correctly:
Step 1: Prepare the workpiece
- Measure the workpiece using a tape measure to determine the dimensions
- Secure the workpiece firmly in the bench vice
Step 2: Position yourself correctly
- Stand beside the bench, not directly in front
- Hold the file handle firmly with one hand
- Place the other hand near the tip of the file for control
Step 3: Perform the filing motion
- Place the file flat on the workpiece surface
- Push the file forward along the length of the metal in one smooth stroke
- Lift the file slightly on the return stroke to avoid damaging the surface
- Repeat this forward-and-back motion evenly across the entire surface
Step 4: Check your work
- Stop periodically to check the flatness of the surface using a straight edge or your fingers
- Measure the workpiece to ensure it meets the required dimensions
Step 5: Clean up
- Remove the workpiece from the vice
- Brush off any metal filings from the workpiece and workbench
- Apply even pressure throughout the stroke – pressing too hard at the start or end creates uneven surfaces
- Use the entire length of the file rather than just a portion to ensure even wear
- File in the direction of the metal grain for smoother results
- Check your work frequently to avoid removing too much material
In Tanzania, a plumber preparing a metal pipe for welding or fitting will use longitudinal filing to smooth the cut end of the pipe after using a hacksaw. For example, after cutting a 50mm diameter GI pipe to length for a water supply line in a house construction project, the plumber files the rough edge lengthwise to create a smooth, even surface that will seal properly when connected with fittings. This skill ensures leak-free plumbing installations in buildings across Dar es Salaam, Arusha, and other regions.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Interpret working drawings
- Select a file.
- Select direction of filing.
- Perform longitudinal filing on a work piece
- Take measurements
- Clean workplace, tools and equipment
- Store tools and equipment safely.
Tathmini ya matokeo
Longitudinal filling performed conforms to given technical specification
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain procedures involved in: -
- Performing longitudinal filing
Principles: The student should explain principles of:
- Performing longitudinal filing
Theories: The student should explain: -
- Importance of longitudinal
Detailed knowledge about:
- Safety precautions while performing longitudinal filing
- Waste disposal
- First aid
Swali
What is longitudinal filing?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado