Mada za sehemu hiiPerforming metal filingMada 3
- Performing draw filling
- Performing longitudinal filling
- Performing cross filling
Cross filing is a filing technique where the file is pushed across the metal surface at an angle, usually diagonal, to remove material quickly and create a flat surface. This technique is typically used as the first step in filing metal, preparing it for smoother finishing methods.
Cross filing is a filing method where the file is held at an angle (usually 30° to 45°) to the workpiece and pushed forward across the metal surface. The file cuts the metal as it moves in one direction, then you lift it and return to the starting position without cutting. This process is repeated until the desired shape or flatness is achieved.
The main purpose of cross filing is to:
- Remove excess material quickly
- Flatten uneven surfaces
- Shape metal to required dimensions
Before performing cross filing, you need to know the following tools:
- Hand file – The primary tool with teeth on its surface
- File handle – Provides grip and safety when using the file
- Bench vice – Holds the metal piece securely
- Tape measure – For measuring dimensions
- Mark pen – For marking the material before filing
- Personal Protective Equipment (PPEs) – Including safety glasses and gloves
Always follow these safety rules in the workshop:
- Secure the workpiece firmly in the bench vice
- Wear safety glasses to protect eyes from metal filings
- Use a file with a proper handle – never use a file without a handle
- File away from your body, not toward yourself
- Keep fingers away from the file teeth
- Brush off filings with a brush, do not use your bare hands
- Work in a well-lit area
- Keep the file clean and free from oil or grease
Step 1: Prepare the Workpiece
- Measure and mark the area to be filed using a tape measure and mark pen
- Secure the metal piece firmly in the bench vice
- Ensure the metal is positioned at a comfortable height
Step 2: Position the File
- Hold the file handle firmly with one hand
- Place the other hand near the tip of the file for control
- Angle the file at approximately 30° to 45° to the workpiece
Step 3: Perform the Filing Motion
- Push the file forward across the metal in a diagonal direction
- Apply even pressure throughout the stroke
- Lift the file on the return stroke (do not drag it backward)
- Repeat the process until the surface is reasonably flat
Step 4: Check Your Work
- Use a straight edge to check if the surface is flat
- Measure to ensure the dimensions are correct
- Continue filing if more material needs to be removed
A plumber needs to prepare a flat metal plate of 100mm length from a piece of flat metal that is 105mm long. The plumber:
- Marks 100mm on the metal using a tape measure and mark pen
- Secures the metal in the bench vice
- Uses cross filing at a 45° angle to remove the excess 5mm
- Files diagonally until the mark is reached
- Checks the length with the tape measure to confirm 100mm
This process produces a flat, accurately sized piece of metal ready for further work.
In Tanzania, a plumber performing cross filing can use this skill when preparing metal brackets or supports for water tank installations. For example, when installing a 500-liter water tank on a roof, the plumber may need to file a metal plate to create flat mounting brackets. Using cross filing, they can quickly shape the metal to fit properly, ensuring the tank is securely supported and does not leak.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Interpret working drawings.
- Select a file
- Select direction of filing
- Perform cross filing on a work piece
- Take measurements
- Clean workplace, tools and equipment
- Store tools and equipment safely.
Tathmini ya matokeo
Cross filling performed conforms to given technical specification
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain the principles of:
- Performing cross filing
Principles: The student should explain principles of:
- Performing cross filing
Theories: The student should explain: -
- Importance of cross filing
Detailed knowledge about:
- Safety precautions while performing cross filing
- Waste disposal
- First aid
Swali
What is the main purpose of cross filing in metalwork?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado