Mada za sehemu hiiMaintaining starter motorsMada 4
- Rectifying pre-engaged starter motor
- Rectifying inertial starter motor
- Rectifying axial starter motor
- Rectifying co-axial starter motor
An axial starter motor is a type of starter motor where the rotor (armature) and stator (field coil) are arranged in a straight line along a common axis. This design makes the motor compact and ideal for vehicles with limited engine compartment space. Unlike pre-engaged starter motors, axial starter motors are less common in modern vehicles but are still used in some specific applications.
- Axial alignment: The armature and field coils are positioned along the same axis, creating a straight-through design.
- Compact design: Occupies less space compared to other starter motor types.
- Components include: Solenoid, pinion drive, and motor housing with armature inside.
- Less common: Not as widely used as pre-engaged starter motors in most vehicles.
A bench test is performed to check the condition of the axial starter motor before installing it or to diagnose faults. Follow these steps:
Step 1: Preparation
- Select tools: battery, multimeter, screwdriver set, pliers, vice, jumper wires, and safety gears (gloves, safety boots, safety glasses, overcoat).
- Observe all safety precautions.
Step 2: Secure the Motor
- Hold the motor securely in a vice.
- Warning: Be careful of the spinning pinion gear during testing.
Step 3: Visual Inspection
Inspect the starter motor and check for:
- Corroded terminals
- Damaged wiring
- Worn pinion gear
- Cracks or burns in the motor housing
Step 4: Connect Test Wires
- Attach one end of the first jumper wire to the body or casing of the starter motor and connect it to the negative terminal of the battery (ground connection).
- Attach one end of the second jumper wire to the starter's main terminal (the larger terminal that connects to the vehicle's battery).
- Do not connect the other end of the positive cable to the battery yet.
Step 5: Perform the Test
- Carefully touch the positive jumper wire to the battery terminal briefly.
- Observe the spinning of the motor.
Step 6: Interpret Results
| Observation | Meaning |
|---|---|
| Motor spins quickly and smoothly | Starter motor is in good condition |
| Motor does not spin or spins slowly | Internal problems such as worn brushes or electrical short |
| Grinding or clicking noises | Faulty components need rectification |
Step 7: Rectify Faults
If faults are observed:
- Replace worn brushes
- Repair electrical shorts
- Clean or replace corroded terminals
- Repair or replace damaged wiring
Step 8: Final Testing
- Test motor performance after rectification.
- Ensure the pinion gear extends and spins freely.
Step 9: Clean Up
- Clean the working area and tools.
- Collect and store all tools as per workshop regulations.
| Fault | Possible Cause | Remedy |
|---|---|---|
| Motor does not spin | Worn brushes, open circuit | Replace brushes, check wiring |
| Motor spins slowly | Weak battery, short in windings | Recharge battery, repair short circuits |
| Noisy operation | Worn pinion gear, loose components | Replace pinion gear, tighten components |
| Clicking sound | Faulty solenoid, poor connections | Test solenoid, clean and tighten connections |
A technician at a local garage in Dar es Salaam receives an axial starter motor from a client who complains that their vehicle's engine will not crank. The technician follows the bench test procedure:
- The technician secures the motor in a vice and performs a visual inspection, finding slightly corroded terminals.
- After connecting the jumper wires and touching the positive wire to the battery, the motor spins slowly with a grinding noise.
- Based on the observation, the technician identifies worn brushes as the cause.
- The technician replaces the brushes, reassembles the motor, and performs the test again. The motor now spins quickly and smoothly, confirming the repair was successful.
This example shows how the bench test helps identify faults and verify repairs before reinstalling the starter motor in the vehicle.
- Always disconnect the battery before working on electrical components.
- Wear safety gear at all times.
- Do not crank the starter motor for more than 10 seconds to avoid overheating.
- Secure the motor properly in the vice to prevent it from falling.
- Be cautious of moving parts during testing.
In Tanzania, a mechanic at a garage in Mwanza might use the bench test procedure for an axial starter motor when a taxi driver brings in a vehicle that won't start. The mechanic can quickly diagnose whether the starter motor is faulty by performing the bench test, replace worn brushes or repair damaged wiring on site, and get the vehicle running again — helping the taxi driver return to work earning money with their car.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select tools, equipment and safety gear
- Remove the axial starter from the vehicle engine
- Dismantle the axial starter motor
- Diagnose axial starter motor components for defects
- Rectify the axial starter motor's faulty components
- Assemble the axial starter motor
- Test the axial starter motor on the bench
- Fix the axial starter motor to the engine
- Test starter for cranking engine
- Observe safety
- Clean tools, equipment and workplace
- Store tools and equipment
Tathmini ya matokeo
Rectified axial starter motor conforms to technical specifications/manufacturer specifications
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to rectify faults of axial starter motor
Principles: The student should explain the principles of:
- Removing the starter from the vehicle engine
- Checking faulty axial starter motor parts
- Magnetism
- Assembling axial starter motor
- Fitting inertial starter to engine
Theories: The student should explain:
- Construction of axial starter motor
- Functions of axial starter motor components
- axial starter motor operation
Circumstantial knowledge:
Detailed knowledge about:
- Safety precautions
- Manufacture’s service manual book
Swali
What is the main characteristic that distinguishes an axial starter motor from other starter motor types?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado