Mada za sehemu hiiMaintaining starter motorsMada 4
- Rectifying pre-engaged starter motor
- Rectifying inertial starter motor
- Rectifying axial starter motor
- Rectifying co-axial starter motor
Rectifying Co-axial Starter Motor
A co-axial starter motor is a type of electric motor used in vehicles to convert electrical energy from the battery into mechanical energy to crank the engine. This motor gets its name because the solenoid and pinion gear are mounted in line (co-axially) with the motor shaft, creating a more direct and compact drive system. Understanding how to test and rectify faults in co-axial starter motors is an essential skill for an auto-electrician.
The term "co-axial" means "sharing the same axis." In a co-axial starter motor, the rotor (armature) and the stator (field coils) share a common axis, with the rotor spinning directly inside the stator. The solenoid and pinion gear are mounted along the same line as the motor shaft, providing a direct path for power transmission.
This design makes the motor compact and suitable for smaller engines or vehicles where space is limited. However, like axial starter motors, co-axial motors are not commonly found in many modern vehicles compared to pre-engaged starter motors.
The co-axial starter motor consists of several important components:
- Armature (Rotor): The rotating part that spins inside the stator, generating mechanical force
- Stator (Field Coils): Stationary coils that create a magnetic field to turn the armature
- Solenoid Switch: An electromagnetic device that connects the battery to the starter motor and engages the pinion gear
- Pinion Gear: A small gear that meshes with the engine's flywheel to crank the engine
- Commutator: A split-ring connector that transfers electrical current to the armature windings
- Brushes: Carbon components that maintain electrical contact with the commutator
Testing the solenoid is the primary procedure for rectifying co-axial starter motor faults. The solenoid is responsible for engaging the pinion gear and completing the electrical circuit.
Required Tools and Equipment
- Co-axial starter motor
- Jumper cables
- 12V battery
- Multimeter
- Screwdriver set
- Pliers
- Vice
- Safety gears (gloves, safety boots, safety glasses, overcoat)
Safety Precautions
- Ensure the vehicle is parked on flat ground with the engine turned off
- Disconnect the negative battery terminal before starting any work
- Wear appropriate safety gear at all times
- Be cautious of moving parts during testing
Testing Procedure
-
Prepare the workplace: Open the bonnet and locate the starter motor. Secure the motor in a vice if bench testing.
-
Set up the multimeter: If using a test light, ground it to the vehicle chassis. If using a multimeter, set it to DC voltage (12V range).
-
Test the ignition signal: Place the positive lead on the solenoid's "S" terminal (the small terminal that receives power from the ignition switch). Place the negative lead on the vehicle's chassis (ground).
-
Activate the ignition: Have an assistant turn the ignition key to the start position while you observe the multimeter or test light.
-
Interpret the results:
- If the multimeter reads approximately 12V or the test light illuminates, the ignition switch and wiring are functioning correctly
- If there is no voltage, check the ignition switch and related wiring for faults
-
Listen for solenoid click: When the ignition is turned to start, listen for an audible click from the solenoid.
-
Diagnose based on observations:
- If the solenoid clicks but the engine does not crank, the solenoid may be working, but the motor could be faulty or there is a connection problem
- If the solenoid does not click, there is a problem in the ignition circuit or insufficient power reaching the solenoid
| Fault | Possible Causes | Remedies |
|---|---|---|
| Solenoid does not click | Faulty ignition switch, broken wiring, weak battery | Check ignition switch, repair wiring, test battery voltage |
| Solenoid clicks but motor does not rotate | Faulty motor, poor ground connection, worn brushes | Check ground connections, test motor windings, replace brushes |
| Motor rotates slowly | Weak battery, worn brushes, shorted armature | Recharge or replace battery, replace brushes, test armature |
| Pinion does not engage | Faulty solenoid, damaged gear mechanism | Test solenoid, inspect and replace damaged components |
A student performs a solenoid test on a co-axial starter motor and obtains the following readings:
- Multimeter shows 12V at the "S" terminal when ignition is turned on
- An audible click is heard from the solenoid
- However, the starter motor does not rotate
Analysis: The ignition circuit is working correctly (12V is present at the solenoid terminal). The solenoid is functioning (clicking sound is heard). The problem lies in the starter motor itself or its connections.
Recommended action: Check the ground connection between the motor and chassis. Inspect the motor's brush condition. Test the motor windings for shorts or opens using a multimeter set to resistance mode.
In Tanzania, a mechanic at a local garage in Dar es Salaam or Mwanza would use these skills when a customer brings a small delivery van or taxi with a starting problem. For example, if a Toyota FunCargo (which may use a co-axial starter motor) fails to start, the mechanic would test the solenoid using a multimeter, check for the 12V signal at the "S" terminal, and then proceed to inspect or replace the starter motor to get the vehicle running again—helping the vehicle owner return to work quickly.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The student should be able to:
- Select tools, equipment and safety gear
- Remove the co-axial starter from the vehicle engine
- Dismantle the co-axial starter motor
- Diagnose co-axial starter motor components for defects
- Rectify co-axial starter motor faulty components
- Assemble the co-axial starter motor
- Test the co-axial starter motor on the bench
- Fix the co-axial starter motor to the engine
- Test starter for cranking engine
- Observe safety
- Clean tools, equipment and workplace
- Store tools and equipment
Tathmini ya matokeo
Rectified co-axial starter motor conforms to technical specifications/manufacturer specifications
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should explain how to rectify faults of co-axial starter motor
Principles: The student should explain the principles involved in rectifying co-axial starter motor
Theories: The student should explain:
- Construction of co-axial starter motor
- Functions of co-axial starter motor components
- co-axial starter motor operation
Circumstantial knowledge:
Detailed knowledge about:
- Safety precautions
- Manufacture’s service manual book
Swali
What does the term "co-axial" refer to in a co-axial starter motor?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado