Mada za sehemu hiiEstimating material and labour costMada 3
- Maintaining records of workshop materials
- Maintaining man hours and day of workshop staff
- Performing job cost calculations
Job cost calculation is the process of adding up every expense needed to complete a specific repair or fabrication job in an agro-mechanics workshop — so the owner knows exactly what to charge the customer and makes no loss on the work.
Before calculating costs, an agro-mechanic gathers information from several standard workshop documents:
- Job card – records the customer's details, machine brought in, fault described, and all materials and labour used.
- Material Requisition Voucher (MRV) – authorises the withdrawal of spare parts and materials from the workshop store.
- Price list – shows the unit cost of each item kept in the workshop.
- Goods Received Note (GRN) – confirms that new materials were received from a supplier and records their cost.
- Local Purchase Order (LPO) – authorises the purchase of materials not currently in stock.
- Stationery and calculator – for writing and totalling figures.
All of these documents work together to make sure no cost is missed.
A complete job cost has three parts:
- Material cost – price of every spare part, consumable, or raw material used.
- Labour cost – charge for the mechanic's time spent doing the work.
- Overhead cost – a share of the workshop running expenses (electricity, tools wear, transport, etc.), usually expressed as a percentage of material or labour cost.
The overall job cost is found using the formula:
Total Job Cost=Material Cost+Labour Cost+Overhead Cost
Step 1 – Identify the Job
Read the inspection report and the job card. Note what machine is being repaired, what the fault is, and what work must be done.
Step 2 – List All Materials Required
Using the job card and the workshop price list, write down every material needed and its unit price. For parts that are not in the store, get proforma invoices from two or three shops, compare them, and use the best price. Then fill in a material requisition voucher for the items. Multiply unit price by quantity to get the cost of each item, then add all item costs together.
Material Cost=∑(Unit Price×Quantity)
Step 3 – Calculate Labour Cost
Record how many hours the job will take (or did take). Multiply the hours by the hourly labour rate.
Labour Cost=Hours Worked×Hourly Rate (TZS)
Step 4 – Add Overhead Cost
Overhead is normally added as a percentage. Each workshop sets its own rate; the example below uses 10 % of the material cost.
Overhead Cost=Overhead Rate×Material Cost
Step 5 – Find the Total Job Cost
Add material cost, labour cost, and overhead cost together.
Total Job Cost=MC+LC+OC
Step 6 – Record on the Job Card
Write all figures on the job card. This document now shows the full cost of the job and is used to bill the customer.
A farmer from Kilombero brings a water pump to the workshop. The mechanic finds a damaged impeller and two worn-out bearings.
| Item | Qty | Unit Price (TZS) | Total (TZS) |
|---|---|---|---|
| Impeller | 1 | 18,000 | 18,000 |
| Bearing | 2 | 4,500 | 9,000 |
| Gasket seal | 1 | 2,000 | 2,000 |
| Engine oil (consumable) | 1 | 5,000 | 5,000 |
| Material Cost | 34,000 |
-
Labour: 3 hours of work at 8,000 TZS per hour Labour Cost=3×8,000=24,000 TZS
-
Overhead: 10 % of material cost Overhead Cost=0.10×34,000=3,400 TZS
-
Total Job Cost: Total=34,000+24,000+3,400=61,400 TZS
The mechanic records 61,400 TZS on the job card and uses it to prepare the customer's invoice.
- Always start by reading the job card carefully.
- Never omit a material — check the MRV and price list before totalling.
- Labour cost depends on actual time spent, not a guess.
- Overhead covers workshop running costs; without it the business loses money.
- The job card is the workshop's record of what was done and what was charged.
A small-scale mechanic in Mwanza who services maize shellers and water pumps uses job cost calculations every week to price repairs for farmers. By accurately adding material, labour, and overhead costs, he sets fair prices that cover his expenses while staying affordable for his customers — helping him earn a reliable income and keep local farms running during the harvest season.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
Students should be able to:
- Read inspection report.
- Prepare material cost estimates.
- Prepare overhead costs
- Prepare material request.
- Obtain proforma invoice from different shops.
- Prepare labour cost including other overheads.
- Clean the tools and equipment.
- Store tools, equipment and other materials.
Tathmini ya matokeo
Cost estimates of materials and labour prepared as per task to be Performed.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: Students should explain how to:
- Interpret inspection report.
- Calculate the costs of identified materials and labour.
Principles: Students should explain the principles of determine man-hour rate to make labour cost estimates.
Theories: Students should explain:
- Importance of estimating materials and labour cost.
Circumstantial knowledge:
Detailed knowledge about:
- Safety precautions involved in performing the tasks
- Safe handling of materials and documents.
Swali
Which of the following documents authorises the withdrawal of spare parts and materials from the workshop store?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado