Mada za sehemu hiiPerforming gas weldingMada 4
- Using gas welding tools and equipment
- Performing gas welding on metals
- Performing gas metal cutting
- Performing brazing
Using Gas Welding Tools and Equipment
Gas welding is a metal joining process that uses a flame produced by burning a mixture of oxygen and a fuel gas (usually acetylene) to melt and join metal pieces together. Before performing gas welding, a welder must understand the different tools and equipment used in the process, as each tool has a specific function that ensures safe and effective welding.
1. Gas Cylinders
Gas cylinders are metal containers that store the gases required for welding. The two main gases used are:
- Oxygen cylinder — stores oxygen that supports combustion
- Acetylene cylinder — stores acetylene, which is the fuel gas that burns to produce the welding flame
These cylinders are heavy and should always be moved using a cylinder trolley to prevent accidents.
2. Regulators
Regulators are devices attached to the gas cylinders that control and reduce the high pressure of gas from the cylinder to a safe working pressure for the torch. They allow the welder to adjust the gas flow accurately.
3. Gas Hoses
Gas hoses are flexible rubber tubes that connect the gas cylinders to the welding torch. They carry the gases safely from the regulators to the torch. Oxygen hoses are usually colored blue, and acetylene hoses are colored red or orange for easy identification.
4. Welding Torch
The welding torch (also called a blowpipe) is the handheld tool that mixes and controls the flow of oxygen and fuel gas to produce the flame needed for welding. The welder holds the torch and directs the flame onto the metal pieces being joined.
5. Welding Tips
Welding tips are interchangeable nozzles attached to the end of the torch. They come in different sizes and control the flame size and heat intensity. Larger tips produce bigger flames for thicker metals, while smaller tips produce smaller flames for thin metals.
6. Strikers
Strikers are small handheld tools used to produce a spark for igniting the gas mixture in the torch. They are safer than using matches or lighters for ignition.
7. Flashback Arrestors
Flashback arrestors are important safety devices attached to the gas hoses near the regulators. They prevent flames from traveling back into the gas cylinders, which could cause explosions. They automatically stop the flow of gas if a flashback occurs.
When using gas welding tools, the welder must wear protective gear to avoid injuries from heat, sparks, and intense light:
- Welding helmet or goggles — protect the eyes and face from the bright flame and harmful radiation
- Welding gloves — protect the hands and forearms from heat and sparks
- Leather apron or welding jacket — protect the body from sparks, heat, and molten metal
- Safety boots — protect the feet from falling objects and hot materials
1. Chipping Hammer and Wire Brush
After welding, the chipping hammer is used to remove slag and spatter from the weld bead. The wire brush is then used to clean the welded area thoroughly.
2. Welding Rods (Filler Rods)
Welding rods are metal rods made of the same or compatible metal as the workpieces. They are added to the molten weld pool to fill gaps and strengthen the joint.
3. Welding Table or Work Surface
A stable, fire-resistant work surface supports the metal pieces during welding. The welding table should be made of steel that can withstand heat and sparks.
4. Clamps
Clamps are used to hold the workpieces securely in position before and during welding, ensuring they do not move out of alignment.
5. Other Tools
- Hammer — for shaping and adjusting metal pieces
- Pair of tongs — for handling hot metal pieces safely
- Chisel — for cutting or shaping metal
- Hacksaw — for cutting metal
- Grinding machine — for smoothing rough edges
- Steel rule and scriber — for measuring and marking metal
Suppose a farmer in Mbeya needs to repair a broken steel fence post. The welder will need the following tools:
- Gas cylinders (oxygen and acetylene) — to supply the gases
- Regulators — to control gas pressure
- Gas hoses — to connect gases to the torch
- Welding torch with a tip — to create the flame
- Striker — to ignite the flame
- Flashback arrestors — for safety
- Welding gloves, helmet, and apron — for personal protection
- Welding rod — to add filler metal for the repair
- Clamps — to hold the fence post in place
- Chipping hammer and wire brush — to clean the weld after welding
By using each tool for its intended purpose, the welder can safely and effectively repair the fence post.
In Tanzania, gas welding skills and tools are commonly used in local workshops to repair agricultural implements such as ploughs, harrows, and ox-carts, as well as to fabricate metal gates, doors, and window frames. A small welding shop in Arusha, for example, might charge around TZS 15,000 to 25,000 for a simple repair job on a broken farm tool using oxy-acetylene welding equipment. These skills are valuable for entrepreneurs who want to start a welding and fabrication business in their community.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
Students should be able to:
- Select tools, equipment and materials.
- Identify gas welding tools and equipment
- Demonstrate parts and function of each gas welding tools and equipment
- Install gas welding equipment
- Test for leakage
- Adjust the welding flame.
- Observe safety precautions
- Demonstrate different types of flame
- Clean tools, equipment, work piece and work place.
- Store tools and equipment.
Tathmini ya matokeo
Gas welding tools and equipment conforms to technical specifications.
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: Students should explain how to:
- Procedures for using gas welding equipment
- Principles: Students should explain the principles of gas welding.
Theories: Students should explain:
- Types of gas welded materials.
- Use of tools and gas welding equipment.
- Properties of oxygen and acetylene gas.
- Types of gas welded joints.
Circumstantial knowledge:
Detailed knowledge about:
- Safety precautions while performing gas welding.
- Safe handling of work tools, equipment and work pieces.
- Waste disposal.
Swali
What is the primary function of a regulator in gas welding equipment?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado