Mada za sehemu hiiMaking seamsMada 5
- Making open flat seams
- Making open French seams
- Making open double seams
- Making overlapping seams
- Making English seams
An open French seam is a strong, neat seam used on leather goods and footwear. Two pieces are first joined by an ordinary seam, the seam is opened out flat, and a row of stitching is then sewn on each side of the join. On the right side you see the join with a row of stitching on either side of it.
- A stitch is one loop of thread passing through the material.
- A seam is the line where two pieces are joined by a row of stitches.
- The seam allowance is the strip of material between the stitch line and the cut edge. For an open French seam it is usually 6 to 8 mm, wide enough for the outer rows of stitching to catch it.
- The right side is the outside of the material (the grain side of leather). The wrong side is the inside (the flesh side of leather).
| Seam | What it looks like | Typical use |
|---|---|---|
| Open flat seam | Only the join shows; the allowances lie open on the wrong side | Bag panels, back seams of shoes |
| Open French seam | The join shows with a row of stitching on each side; the allowances lie open and are stitched down | Bags, wallets, shoe uppers |
| Closed French seam | No raw edge shows; the edges are shut inside the seam | Thin fabric linings that fray |
Leather does not fray, so its raw edges need not be shut inside the seam, and a closed French seam would be far too bulky in leather. This is why the open form is used.
- Two pieces of leather or fabric, cut to the pattern
- Thread: strong polyester or nylon, thicker for thick leather, finer for thin leather or fabric
- Needle: a leather-point machine needle for leather, a round-point needle for fabric; the thicker the thread, the thicker the needle
- Sewing machine and screwdriver
- Scissors, sliding knife, ruler and measuring tape
- Adhesive, reinforcing tape and a mallet
- Safety gloves, safety boots and a dust coat or overall
Study the working drawing first. It shows which edges are joined, the width of the seam allowance and how far the two outer rows of stitching lie from the join.
- Switch the machine off.
- Fit the needle the right way round, push it fully up and tighten the needle screw with the screwdriver.
- Thread the machine and insert the wound bobbin.
- Set the stitch-length regulator to about 3 mm. Very short stitches weaken leather like a row of perforations.
- Sew a test seam on two offcuts of the same material. The stitches should look the same on both sides. If loops show underneath, increase the needle-thread tension a little; if they show on top, reduce it.
- Cut the pieces. Cut two sample pieces accurately to the pattern, with clean, straight edges.
- Mark the seam line. On the wrong side of one piece, mark a line 6 mm from the edge to be joined.
- Place right sides together. Lay the pieces face to face with the edges level. Hold them with clips, not pins, because pin holes in leather are permanent.
- Stitch the first seam. Sew along the marked line. Fasten each end by sewing back over the last three or four stitches.
- Open the seam. Open the pieces out flat, wrong side up. Fold one seam allowance to the left and the other to the right, and tap along the seam with the mallet until it lies flat. Do not press leather with a hot iron.
- Hold the allowances down. Put a thin coat of adhesive under each allowance and press it down. Where the seam will carry strain, stick a strip of reinforcing tape along the open seam.
- Stitch the first outer row. Turn the work right side up. Sew a row of stitching 2 to 3 mm from the join and parallel to it, through the leather and the allowance underneath.
- Stitch the second outer row. Sew another row the same distance from the join on the other side, working in the same direction as the first so that the seam does not twist.
- Finish the thread ends. Pull the thread ends through to the wrong side, knot them and trim them short.
- Clean the seam. Rub off any adhesive that has squeezed out, wipe away marking lines with a soft cloth and cut off loose threads.
- Right side: a closed join with a straight row of stitching on each side, both rows the same distance from the join, and stitches all the same length, with no puckers or loops.
- Wrong side: both seam allowances lie flat and are caught by the stitching along their whole length.
A student joins two leather panels, each 15 cm by 8 cm, along one long edge to make the outside of a simple wallet.
- She marks a line 6 mm from the long edge on the wrong side of one panel.
- She clips the panels right sides together and stitches along the line, fastening both ends.
- She opens the panels, folds one allowance to each side, taps the seam flat and glues the allowances down.
- On the right side she stitches one row 3 mm to the left of the join and one row 3 mm to the right, then knots and trims the thread ends on the wrong side.
Each panel loses 6 mm to the seam allowance, so the finished piece measures 15 cm by 14.8 cm.
- Keep your fingers away from the needle, and take your foot off the pedal before you move your hands near it.
- Switch the machine off before threading it, changing the needle or cleaning it.
- Tie back long hair and do not wear loose sleeves at the machine.
- Cut away from your body with the knife and keep the blade covered when it is not in use.
- Use adhesive in a well-ventilated place and keep it away from flames.
- Wear your dust coat or overall and safety boots, and use the sewing machine only under supervision.
For a needle prick or a small cut, stop work, wash the wound with clean water and soap, press on it with a clean cloth until the bleeding stops, and cover it with a clean dressing. If a cut is deep, or a broken machine needle is stuck in a finger, switch off the machine, do not pull the needle out, and get help at once. Report every injury.
- With the power off, brush lint and leather dust from around the needle plate and bobbin case, then cover the machine.
- Wipe the scissors, knife and mallet and return every tool to its place.
- Put offcuts and thread ends in the dustbin, and put broken needles in a closed tin first.
- Store leather flat or loosely rolled in a dry place out of the sun, and close the adhesive container tightly.
In Tanzania, a young entrepreneur who has learned to make open French seams can make and sell leather bags, pouches and sandal uppers at a local market in Arusha or Mwanza. The two neat rows of stitching make the products look professional, and the stitched-down allowances make the seams strong and long-lasting.
Jinsi utakavyotathminiwaTathmini ya mchakato · Tathmini ya matokeo · Tathmini ya maarifa
Tathmini ya mchakato
The students should be able to:
- Select materials
- Interpret different drawings
- Select the correct tools and equipment
- Select the correct types of threads and needles to suit the materials needed.
- Cut sample leathers well
- Set and adjust the sewing machine
- Select and set a stitch length
- Perform different types of seams well
- Clean the seams thoroughly
- Observe safety.
- Clean tools and equipment well
- Store materials correctly
- Store tools and equipment correctly
Tathmini ya matokeo
French open seam are made according to their specifications
Tathmini ya maarifa
Knowledge evidence:
Detailed knowledge of:
Method used: The student should correctly explain how to:
- Set machine seams
- Prepare the materials for different seams
- Make seams
- Finish thread ends
Principles: The student should correctly explain the principles of:
- Setting machine seams.
- Preparing materials for different seams
- Making seams
- Finishing and thread ends
Theories: The student should correctly explain:
- The difference between seams and stitches
- Seam allowances
- Use of different seams
- Types of threads, needles and materials used while seaming
Circumstantial knowledge:
Detailed knowledge of:
- Safety precautions on sewing operation
- Safe handling of tools and equipment
- First aid
- Waste disposal
Swali
What is the typical seam allowance for an open French seam on leather?
Ingia ili kuwasilisha jibu lako na lihesabiwe katika umahiri wako.
Ingia ili kufanya mazoeziMwalimu
Umekwama? Niulize chochote kuhusu mada hii.
Ingia ili kumuuliza Mwalimu wa AI wa Sonza kuhusu swali hili.
Ingia ili kuulizaMajadiliano
Hakuna maswali bado